asd

venv/lib/python3.12/site-packages/fontTools/varLib/__main__.py

@@ -0,0 +1,6 @@
+import sys
+from fontTools.varLib import main
+
+
+if __name__ == "__main__":
+    sys.exit(main())

venv/lib/python3.12/site-packages/fontTools/varLib/avar.py

@@ -0,0 +1,260 @@
+from fontTools.varLib import _add_avar, load_designspace
+from fontTools.varLib.models import VariationModel
+from fontTools.varLib.varStore import VarStoreInstancer
+from fontTools.misc.fixedTools import fixedToFloat as fi2fl
+from fontTools.misc.cliTools import makeOutputFileName
+from itertools import product
+import logging
+
+log = logging.getLogger("fontTools.varLib.avar")
+
+
+def _denormalize(v, axis):
+    if v >= 0:
+        return axis.defaultValue + v * (axis.maxValue - axis.defaultValue)
+    else:
+        return axis.defaultValue + v * (axis.defaultValue - axis.minValue)
+
+
+def _pruneLocations(locations, poles, axisTags):
+    # Now we have all the input locations, find which ones are
+    # not needed and remove them.
+
+    # Note: This algorithm is heavily tied to how VariationModel
+    # is implemented.  It assumes that input was extracted from
+    # VariationModel-generated object, like an ItemVariationStore
+    # created by fontmake using varLib.models.VariationModel.
+    # Some CoPilot blabbering:
+    # I *think* I can prove that this algorithm is correct, but
+    # I'm not 100% sure.  It's possible that there are edge cases
+    # where this algorithm will fail.  I'm not sure how to prove
+    # that it's correct, but I'm also not sure how to prove that
+    # it's incorrect.  I'm not sure how to write a test case that
+    # would prove that it's incorrect.  I'm not sure how to write
+    # a test case that would prove that it's correct.
+
+    model = VariationModel(locations, axisTags)
+    modelMapping = model.mapping
+    modelSupports = model.supports
+    pins = {tuple(k.items()): None for k in poles}
+    for location in poles:
+        i = locations.index(location)
+        i = modelMapping[i]
+        support = modelSupports[i]
+        supportAxes = set(support.keys())
+        for axisTag, (minV, _, maxV) in support.items():
+            for v in (minV, maxV):
+                if v in (-1, 0, 1):
+                    continue
+                for pin in pins.keys():
+                    pinLocation = dict(pin)
+                    pinAxes = set(pinLocation.keys())
+                    if pinAxes != supportAxes:
+                        continue
+                    if axisTag not in pinAxes:
+                        continue
+                    if pinLocation[axisTag] == v:
+                        break
+                else:
+                    # No pin found. Go through the previous masters
+                    # and find a suitable pin.  Going backwards is
+                    # better because it can find a pin that is close
+                    # to the pole in more dimensions, and reducing
+                    # the total number of pins needed.
+                    for candidateIdx in range(i - 1, -1, -1):
+                        candidate = modelSupports[candidateIdx]
+                        candidateAxes = set(candidate.keys())
+                        if candidateAxes != supportAxes:
+                            continue
+                        if axisTag not in candidateAxes:
+                            continue
+                        candidate = {
+                            k: defaultV for k, (_, defaultV, _) in candidate.items()
+                        }
+                        if candidate[axisTag] == v:
+                            pins[tuple(candidate.items())] = None
+                            break
+                    else:
+                        assert False, "No pin found"
+    return [dict(t) for t in pins.keys()]
+
+
+def mappings_from_avar(font, denormalize=True):
+    fvarAxes = font["fvar"].axes
+    axisMap = {a.axisTag: a for a in fvarAxes}
+    axisTags = [a.axisTag for a in fvarAxes]
+    axisIndexes = {a.axisTag: i for i, a in enumerate(fvarAxes)}
+    if "avar" not in font:
+        return {}, {}
+    avar = font["avar"]
+    axisMaps = {
+        tag: seg
+        for tag, seg in avar.segments.items()
+        if seg and seg != {-1: -1, 0: 0, 1: 1}
+    }
+    mappings = []
+
+    if getattr(avar, "majorVersion", 1) == 2:
+        varStore = avar.table.VarStore
+        regions = varStore.VarRegionList.Region
+
+        # Find all the input locations; this finds "poles", that are
+        # locations of the peaks, and "corners", that are locations
+        # of the corners of the regions.  These two sets of locations
+        # together constitute inputLocations to consider.
+
+        poles = {(): None}  # Just using it as an ordered set
+        inputLocations = set({()})
+        for varData in varStore.VarData:
+            regionIndices = varData.VarRegionIndex
+            for regionIndex in regionIndices:
+                peakLocation = []
+                corners = []
+                region = regions[regionIndex]
+                for axisIndex, axis in enumerate(region.VarRegionAxis):
+                    if axis.PeakCoord == 0:
+                        continue
+                    axisTag = axisTags[axisIndex]
+                    peakLocation.append((axisTag, axis.PeakCoord))
+                    corner = []
+                    if axis.StartCoord != 0:
+                        corner.append((axisTag, axis.StartCoord))
+                    if axis.EndCoord != 0:
+                        corner.append((axisTag, axis.EndCoord))
+                    corners.append(corner)
+                corners = set(product(*corners))
+                peakLocation = tuple(peakLocation)
+                poles[peakLocation] = None
+                inputLocations.add(peakLocation)
+                inputLocations.update(corners)
+
+        # Sort them by number of axes, then by axis order
+        inputLocations = [
+            dict(t)
+            for t in sorted(
+                inputLocations,
+                key=lambda t: (len(t), tuple(axisIndexes[tag] for tag, _ in t)),
+            )
+        ]
+        poles = [dict(t) for t in poles.keys()]
+        inputLocations = _pruneLocations(inputLocations, list(poles), axisTags)
+
+        # Find the output locations, at input locations
+        varIdxMap = avar.table.VarIdxMap
+        instancer = VarStoreInstancer(varStore, fvarAxes)
+        for location in inputLocations:
+            instancer.setLocation(location)
+            outputLocation = {}
+            for axisIndex, axisTag in enumerate(axisTags):
+                varIdx = axisIndex
+                if varIdxMap is not None:
+                    varIdx = varIdxMap[varIdx]
+                delta = instancer[varIdx]
+                if delta != 0:
+                    v = location.get(axisTag, 0)
+                    v = v + fi2fl(delta, 14)
+                    # See https://github.com/fonttools/fonttools/pull/3598#issuecomment-2266082009
+                    # v = max(-1, min(1, v))
+                    outputLocation[axisTag] = v
+            mappings.append((location, outputLocation))
+
+        # Remove base master we added, if it maps to the default location
+        assert mappings[0][0] == {}
+        if mappings[0][1] == {}:
+            mappings.pop(0)
+
+    if denormalize:
+        for tag, seg in axisMaps.items():
+            if tag not in axisMap:
+                raise ValueError(f"Unknown axis tag {tag}")
+            denorm = lambda v: _denormalize(v, axisMap[tag])
+            axisMaps[tag] = {denorm(k): denorm(v) for k, v in seg.items()}
+
+        for i, (inputLoc, outputLoc) in enumerate(mappings):
+            inputLoc = {
+                tag: _denormalize(val, axisMap[tag]) for tag, val in inputLoc.items()
+            }
+            outputLoc = {
+                tag: _denormalize(val, axisMap[tag]) for tag, val in outputLoc.items()
+            }
+            mappings[i] = (inputLoc, outputLoc)
+
+    return axisMaps, mappings
+
+
+def main(args=None):
+    """Add `avar` table from designspace file to variable font."""
+
+    if args is None:
+        import sys
+
+        args = sys.argv[1:]
+
+    from fontTools import configLogger
+    from fontTools.ttLib import TTFont
+    from fontTools.designspaceLib import DesignSpaceDocument
+    import argparse
+
+    parser = argparse.ArgumentParser(
+        "fonttools varLib.avar",
+        description="Add `avar` table from designspace file to variable font.",
+    )
+    parser.add_argument("font", metavar="varfont.ttf", help="Variable-font file.")
+    parser.add_argument(
+        "designspace",
+        metavar="family.designspace",
+        help="Designspace file.",
+        nargs="?",
+        default=None,
+    )
+    parser.add_argument(
+        "-o",
+        "--output-file",
+        type=str,
+        help="Output font file name.",
+    )
+    parser.add_argument(
+        "-v", "--verbose", action="store_true", help="Run more verbosely."
+    )
+
+    options = parser.parse_args(args)
+
+    configLogger(level=("INFO" if options.verbose else "WARNING"))
+
+    font = TTFont(options.font)
+    if not "fvar" in font:
+        log.error("Not a variable font.")
+        return 1
+
+    if options.designspace is None:
+        from pprint import pprint
+
+        segments, mappings = mappings_from_avar(font)
+        pprint(segments)
+        pprint(mappings)
+        print(len(mappings), "mappings")
+        return
+
+    axisTags = [a.axisTag for a in font["fvar"].axes]
+
+    ds = load_designspace(options.designspace, require_sources=False)
+
+    if "avar" in font:
+        log.warning("avar table already present, overwriting.")
+        del font["avar"]
+
+    _add_avar(font, ds.axes, ds.axisMappings, axisTags)
+
+    if options.output_file is None:
+        outfile = makeOutputFileName(options.font, overWrite=True, suffix=".avar")
+    else:
+        outfile = options.output_file
+    if outfile:
+        log.info("Saving %s", outfile)
+        font.save(outfile)
+
+
+if __name__ == "__main__":
+    import sys
+
+    sys.exit(main())

venv/lib/python3.12/site-packages/fontTools/varLib/builder.py

@@ -0,0 +1,215 @@
+from fontTools import ttLib
+from fontTools.ttLib.tables import otTables as ot
+
+# VariationStore
+
+
+def buildVarRegionAxis(axisSupport):
+    self = ot.VarRegionAxis()
+    self.StartCoord, self.PeakCoord, self.EndCoord = [float(v) for v in axisSupport]
+    return self
+
+
+def buildSparseVarRegionAxis(axisIndex, axisSupport):
+    self = ot.SparseVarRegionAxis()
+    self.AxisIndex = axisIndex
+    self.StartCoord, self.PeakCoord, self.EndCoord = [float(v) for v in axisSupport]
+    return self
+
+
+def buildVarRegion(support, axisTags):
+    assert all(tag in axisTags for tag in support.keys()), (
+        "Unknown axis tag found.",
+        support,
+        axisTags,
+    )
+    self = ot.VarRegion()
+    self.VarRegionAxis = []
+    for tag in axisTags:
+        self.VarRegionAxis.append(buildVarRegionAxis(support.get(tag, (0, 0, 0))))
+    return self
+
+
+def buildSparseVarRegion(support, axisTags):
+    assert all(tag in axisTags for tag in support.keys()), (
+        "Unknown axis tag found.",
+        support,
+        axisTags,
+    )
+    self = ot.SparseVarRegion()
+    self.SparseVarRegionAxis = []
+    for i, tag in enumerate(axisTags):
+        if tag not in support:
+            continue
+        self.SparseVarRegionAxis.append(
+            buildSparseVarRegionAxis(i, support.get(tag, (0, 0, 0)))
+        )
+    self.SparseRegionCount = len(self.SparseVarRegionAxis)
+    return self
+
+
+def buildVarRegionList(supports, axisTags):
+    self = ot.VarRegionList()
+    self.RegionAxisCount = len(axisTags)
+    self.Region = []
+    for support in supports:
+        self.Region.append(buildVarRegion(support, axisTags))
+    self.RegionCount = len(self.Region)
+    return self
+
+
+def buildSparseVarRegionList(supports, axisTags):
+    self = ot.SparseVarRegionList()
+    self.RegionAxisCount = len(axisTags)
+    self.Region = []
+    for support in supports:
+        self.Region.append(buildSparseVarRegion(support, axisTags))
+    self.RegionCount = len(self.Region)
+    return self
+
+
+def _reorderItem(lst, mapping):
+    return [lst[i] for i in mapping]
+
+
+def VarData_calculateNumShorts(self, optimize=False):
+    count = self.VarRegionCount
+    items = self.Item
+    bit_lengths = [0] * count
+    for item in items:
+        # The "+ (i < -1)" magic is to handle two's-compliment.
+        # That is, we want to get back 7 for -128, whereas
+        # bit_length() returns 8. Similarly for -65536.
+        # The reason "i < -1" is used instead of "i < 0" is that
+        # the latter would make it return 0 for "-1" instead of 1.
+        bl = [(i + (i < -1)).bit_length() for i in item]
+        bit_lengths = [max(*pair) for pair in zip(bl, bit_lengths)]
+    # The addition of 8, instead of seven, is to account for the sign bit.
+    # This "((b + 8) >> 3) if b else 0" when combined with the above
+    # "(i + (i < -1)).bit_length()" is a faster way to compute byte-lengths
+    # conforming to:
+    #
+    # byte_length = (0 if i == 0 else
+    # 		 1 if -128 <= i < 128 else
+    # 		 2 if -65536 <= i < 65536 else
+    # 		 ...)
+    byte_lengths = [((b + 8) >> 3) if b else 0 for b in bit_lengths]
+
+    # https://github.com/fonttools/fonttools/issues/2279
+    longWords = any(b > 2 for b in byte_lengths)
+
+    if optimize:
+        # Reorder columns such that wider columns come before narrower columns
+        mapping = []
+        mapping.extend(i for i, b in enumerate(byte_lengths) if b > 2)
+        mapping.extend(i for i, b in enumerate(byte_lengths) if b == 2)
+        mapping.extend(i for i, b in enumerate(byte_lengths) if b == 1)
+
+        byte_lengths = _reorderItem(byte_lengths, mapping)
+        self.VarRegionIndex = _reorderItem(self.VarRegionIndex, mapping)
+        self.VarRegionCount = len(self.VarRegionIndex)
+        for i in range(len(items)):
+            items[i] = _reorderItem(items[i], mapping)
+
+    if longWords:
+        self.NumShorts = (
+            max((i for i, b in enumerate(byte_lengths) if b > 2), default=-1) + 1
+        )
+        self.NumShorts |= 0x8000
+    else:
+        self.NumShorts = (
+            max((i for i, b in enumerate(byte_lengths) if b > 1), default=-1) + 1
+        )
+
+    self.VarRegionCount = len(self.VarRegionIndex)
+    return self
+
+
+ot.VarData.calculateNumShorts = VarData_calculateNumShorts
+
+
+def VarData_CalculateNumShorts(self, optimize=True):
+    """Deprecated name for VarData_calculateNumShorts() which
+    defaults to optimize=True.  Use varData.calculateNumShorts()
+    or varData.optimize()."""
+    return VarData_calculateNumShorts(self, optimize=optimize)
+
+
+def VarData_optimize(self):
+    return VarData_calculateNumShorts(self, optimize=True)
+
+
+ot.VarData.optimize = VarData_optimize
+
+
+def buildVarData(varRegionIndices, items, optimize=True):
+    self = ot.VarData()
+    self.VarRegionIndex = list(varRegionIndices)
+    regionCount = self.VarRegionCount = len(self.VarRegionIndex)
+    records = self.Item = []
+    if items:
+        for item in items:
+            assert len(item) == regionCount
+            records.append(list(item))
+    self.ItemCount = len(self.Item)
+    self.calculateNumShorts(optimize=optimize)
+    return self
+
+
+def buildVarStore(varRegionList, varDataList):
+    self = ot.VarStore()
+    self.Format = 1
+    self.VarRegionList = varRegionList
+    self.VarData = list(varDataList)
+    self.VarDataCount = len(self.VarData)
+    return self
+
+
+def buildMultiVarData(varRegionIndices, items):
+    self = ot.MultiVarData()
+    self.Format = 1
+    self.VarRegionIndex = list(varRegionIndices)
+    regionCount = self.VarRegionCount = len(self.VarRegionIndex)
+    records = self.Item = []
+    if items:
+        for item in items:
+            assert len(item) == regionCount
+            records.append(list(item))
+    self.ItemCount = len(self.Item)
+    return self
+
+
+def buildMultiVarStore(varRegionList, multiVarDataList):
+    self = ot.MultiVarStore()
+    self.Format = 1
+    self.SparseVarRegionList = varRegionList
+    self.MultiVarData = list(multiVarDataList)
+    self.MultiVarDataCount = len(self.MultiVarData)
+    return self
+
+
+# Variation helpers
+
+
+def buildVarIdxMap(varIdxes, glyphOrder):
+    self = ot.VarIdxMap()
+    self.mapping = {g: v for g, v in zip(glyphOrder, varIdxes)}
+    return self
+
+
+def buildDeltaSetIndexMap(varIdxes):
+    mapping = list(varIdxes)
+    if all(i == v for i, v in enumerate(mapping)):
+        return None
+    self = ot.DeltaSetIndexMap()
+    self.mapping = mapping
+    self.Format = 1 if len(mapping) > 0xFFFF else 0
+    return self
+
+
+def buildVarDevTable(varIdx):
+    self = ot.Device()
+    self.DeltaFormat = 0x8000
+    self.StartSize = varIdx >> 16
+    self.EndSize = varIdx & 0xFFFF
+    return self

venv/lib/python3.12/site-packages/fontTools/varLib/cff.py

@@ -0,0 +1,631 @@
+from collections import namedtuple
+from fontTools.cffLib import (
+    maxStackLimit,
+    TopDictIndex,
+    buildOrder,
+    topDictOperators,
+    topDictOperators2,
+    privateDictOperators,
+    privateDictOperators2,
+    FDArrayIndex,
+    FontDict,
+    VarStoreData,
+)
+from io import BytesIO
+from fontTools.cffLib.specializer import specializeCommands, commandsToProgram
+from fontTools.ttLib import newTable
+from fontTools import varLib
+from fontTools.varLib.models import allEqual
+from fontTools.misc.loggingTools import deprecateFunction
+from fontTools.misc.roundTools import roundFunc
+from fontTools.misc.psCharStrings import T2CharString, T2OutlineExtractor
+from fontTools.pens.t2CharStringPen import T2CharStringPen
+from functools import partial
+
+from .errors import (
+    VarLibCFFDictMergeError,
+    VarLibCFFPointTypeMergeError,
+    VarLibCFFHintTypeMergeError,
+    VarLibMergeError,
+)
+
+
+# Backwards compatibility
+MergeDictError = VarLibCFFDictMergeError
+MergeTypeError = VarLibCFFPointTypeMergeError
+
+
+def addCFFVarStore(varFont, varModel, varDataList, masterSupports):
+    fvarTable = varFont["fvar"]
+    axisKeys = [axis.axisTag for axis in fvarTable.axes]
+    varTupleList = varLib.builder.buildVarRegionList(masterSupports, axisKeys)
+    varStoreCFFV = varLib.builder.buildVarStore(varTupleList, varDataList)
+
+    topDict = varFont["CFF2"].cff.topDictIndex[0]
+    topDict.VarStore = VarStoreData(otVarStore=varStoreCFFV)
+    if topDict.FDArray[0].vstore is None:
+        fdArray = topDict.FDArray
+        for fontDict in fdArray:
+            if hasattr(fontDict, "Private"):
+                fontDict.Private.vstore = topDict.VarStore
+
+
+@deprecateFunction("Use fontTools.cffLib.CFFToCFF2.convertCFFToCFF2 instead.")
+def convertCFFtoCFF2(varFont):
+    from fontTools.cffLib.CFFToCFF2 import convertCFFToCFF2
+
+    return convertCFFToCFF2(varFont)
+
+
+def conv_to_int(num):
+    if isinstance(num, float) and num.is_integer():
+        return int(num)
+    return num
+
+
+pd_blend_fields = (
+    "BlueValues",
+    "OtherBlues",
+    "FamilyBlues",
+    "FamilyOtherBlues",
+    "BlueScale",
+    "BlueShift",
+    "BlueFuzz",
+    "StdHW",
+    "StdVW",
+    "StemSnapH",
+    "StemSnapV",
+)
+
+
+def get_private(regionFDArrays, fd_index, ri, fd_map):
+    region_fdArray = regionFDArrays[ri]
+    region_fd_map = fd_map[fd_index]
+    if ri in region_fd_map:
+        region_fdIndex = region_fd_map[ri]
+        private = region_fdArray[region_fdIndex].Private
+    else:
+        private = None
+    return private
+
+
+def merge_PrivateDicts(top_dicts, vsindex_dict, var_model, fd_map):
+    """
+    I step through the FontDicts in the FDArray of the varfont TopDict.
+    For each varfont FontDict:
+
+    * step through each key in FontDict.Private.
+    * For each key, step through each relevant source font Private dict, and
+      build a list of values to blend.
+
+    The 'relevant' source fonts are selected by first getting the right
+    submodel using ``vsindex_dict[vsindex]``. The indices of the
+    ``subModel.locations`` are mapped to source font list indices by
+    assuming the latter order is the same as the order of the
+    ``var_model.locations``. I can then get the index of each subModel
+    location in the list of ``var_model.locations``.
+    """
+
+    topDict = top_dicts[0]
+    region_top_dicts = top_dicts[1:]
+    if hasattr(region_top_dicts[0], "FDArray"):
+        regionFDArrays = [fdTopDict.FDArray for fdTopDict in region_top_dicts]
+    else:
+        regionFDArrays = [[fdTopDict] for fdTopDict in region_top_dicts]
+    for fd_index, font_dict in enumerate(topDict.FDArray):
+        private_dict = font_dict.Private
+        vsindex = getattr(private_dict, "vsindex", 0)
+        # At the moment, no PrivateDict has a vsindex key, but let's support
+        # how it should work. See comment at end of
+        # merge_charstrings() - still need to optimize use of vsindex.
+        sub_model, _ = vsindex_dict[vsindex]
+        master_indices = []
+        for loc in sub_model.locations[1:]:
+            i = var_model.locations.index(loc) - 1
+            master_indices.append(i)
+        pds = [private_dict]
+        last_pd = private_dict
+        for ri in master_indices:
+            pd = get_private(regionFDArrays, fd_index, ri, fd_map)
+            # If the region font doesn't have this FontDict, just reference
+            # the last one used.
+            if pd is None:
+                pd = last_pd
+            else:
+                last_pd = pd
+            pds.append(pd)
+        num_masters = len(pds)
+        for key, value in private_dict.rawDict.items():
+            dataList = []
+            if key not in pd_blend_fields:
+                continue
+            if isinstance(value, list):
+                try:
+                    values = [pd.rawDict[key] for pd in pds]
+                except KeyError:
+                    print(
+                        "Warning: {key} in default font Private dict is "
+                        "missing from another font, and was "
+                        "discarded.".format(key=key)
+                    )
+                    continue
+                try:
+                    values = zip(*values)
+                except IndexError:
+                    raise VarLibCFFDictMergeError(key, value, values)
+                """
+				Row 0 contains the first  value from each master.
+				Convert each row from absolute values to relative
+				values from the previous row.
+				e.g for three masters,	a list of values was:
+				master 0 OtherBlues = [-217,-205]
+				master 1 OtherBlues = [-234,-222]
+				master 1 OtherBlues = [-188,-176]
+				The call to zip() converts this to:
+				[(-217, -234, -188), (-205, -222, -176)]
+				and is converted finally to:
+				OtherBlues = [[-217, 17.0, 46.0], [-205, 0.0, 0.0]]
+				"""
+                prev_val_list = [0] * num_masters
+                any_points_differ = False
+                for val_list in values:
+                    rel_list = [
+                        (val - prev_val_list[i]) for (i, val) in enumerate(val_list)
+                    ]
+                    if (not any_points_differ) and not allEqual(rel_list):
+                        any_points_differ = True
+                    prev_val_list = val_list
+                    deltas = sub_model.getDeltas(rel_list)
+                    # For PrivateDict BlueValues, the default font
+                    # values are absolute, not relative to the prior value.
+                    deltas[0] = val_list[0]
+                    dataList.append(deltas)
+                # If there are no blend values,then
+                # we can collapse the blend lists.
+                if not any_points_differ:
+                    dataList = [data[0] for data in dataList]
+            else:
+                values = [pd.rawDict[key] for pd in pds]
+                if not allEqual(values):
+                    dataList = sub_model.getDeltas(values)
+                else:
+                    dataList = values[0]
+
+            # Convert numbers with no decimal part to an int
+            if isinstance(dataList, list):
+                for i, item in enumerate(dataList):
+                    if isinstance(item, list):
+                        for j, jtem in enumerate(item):
+                            dataList[i][j] = conv_to_int(jtem)
+                    else:
+                        dataList[i] = conv_to_int(item)
+            else:
+                dataList = conv_to_int(dataList)
+
+            private_dict.rawDict[key] = dataList
+
+
+def _cff_or_cff2(font):
+    if "CFF " in font:
+        return font["CFF "]
+    return font["CFF2"]
+
+
+def getfd_map(varFont, fonts_list):
+    """Since a subset source font may have fewer FontDicts in their
+    FDArray than the default font, we have to match up the FontDicts in
+    the different fonts . We do this with the FDSelect array, and by
+    assuming that the same glyph will reference  matching FontDicts in
+    each source font. We return a mapping from fdIndex in the default
+    font to a dictionary which maps each master list index of each
+    region font to the equivalent fdIndex in the region font."""
+    fd_map = {}
+    default_font = fonts_list[0]
+    region_fonts = fonts_list[1:]
+    num_regions = len(region_fonts)
+    topDict = _cff_or_cff2(default_font).cff.topDictIndex[0]
+    if not hasattr(topDict, "FDSelect"):
+        # All glyphs reference only one FontDict.
+        # Map the FD index for regions to index 0.
+        fd_map[0] = {ri: 0 for ri in range(num_regions)}
+        return fd_map
+
+    gname_mapping = {}
+    default_fdSelect = topDict.FDSelect
+    glyphOrder = default_font.getGlyphOrder()
+    for gid, fdIndex in enumerate(default_fdSelect):
+        gname_mapping[glyphOrder[gid]] = fdIndex
+        if fdIndex not in fd_map:
+            fd_map[fdIndex] = {}
+    for ri, region_font in enumerate(region_fonts):
+        region_glyphOrder = region_font.getGlyphOrder()
+        region_topDict = _cff_or_cff2(region_font).cff.topDictIndex[0]
+        if not hasattr(region_topDict, "FDSelect"):
+            # All the glyphs share the same FontDict. Pick any glyph.
+            default_fdIndex = gname_mapping[region_glyphOrder[0]]
+            fd_map[default_fdIndex][ri] = 0
+        else:
+            region_fdSelect = region_topDict.FDSelect
+            for gid, fdIndex in enumerate(region_fdSelect):
+                default_fdIndex = gname_mapping[region_glyphOrder[gid]]
+                region_map = fd_map[default_fdIndex]
+                if ri not in region_map:
+                    region_map[ri] = fdIndex
+    return fd_map
+
+
+CVarData = namedtuple("CVarData", "varDataList masterSupports vsindex_dict")
+
+
+def merge_region_fonts(varFont, model, ordered_fonts_list, glyphOrder):
+    topDict = varFont["CFF2"].cff.topDictIndex[0]
+    top_dicts = [topDict] + [
+        _cff_or_cff2(ttFont).cff.topDictIndex[0] for ttFont in ordered_fonts_list[1:]
+    ]
+    num_masters = len(model.mapping)
+    cvData = merge_charstrings(glyphOrder, num_masters, top_dicts, model)
+    fd_map = getfd_map(varFont, ordered_fonts_list)
+    merge_PrivateDicts(top_dicts, cvData.vsindex_dict, model, fd_map)
+    addCFFVarStore(varFont, model, cvData.varDataList, cvData.masterSupports)
+
+
+def _get_cs(charstrings, glyphName, filterEmpty=False):
+    if glyphName not in charstrings:
+        return None
+    cs = charstrings[glyphName]
+
+    if filterEmpty:
+        cs.decompile()
+        if cs.program == []:  # CFF2 empty charstring
+            return None
+        elif (
+            len(cs.program) <= 2
+            and cs.program[-1] == "endchar"
+            and (len(cs.program) == 1 or type(cs.program[0]) in (int, float))
+        ):  # CFF1 empty charstring
+            return None
+
+    return cs
+
+
+def _add_new_vsindex(
+    model, key, masterSupports, vsindex_dict, vsindex_by_key, varDataList
+):
+    varTupleIndexes = []
+    for support in model.supports[1:]:
+        if support not in masterSupports:
+            masterSupports.append(support)
+        varTupleIndexes.append(masterSupports.index(support))
+    var_data = varLib.builder.buildVarData(varTupleIndexes, None, False)
+    vsindex = len(vsindex_dict)
+    vsindex_by_key[key] = vsindex
+    vsindex_dict[vsindex] = (model, [key])
+    varDataList.append(var_data)
+    return vsindex
+
+
+def merge_charstrings(glyphOrder, num_masters, top_dicts, masterModel):
+    vsindex_dict = {}
+    vsindex_by_key = {}
+    varDataList = []
+    masterSupports = []
+    default_charstrings = top_dicts[0].CharStrings
+    for gid, gname in enumerate(glyphOrder):
+        # interpret empty non-default masters as missing glyphs from a sparse master
+        all_cs = [
+            _get_cs(td.CharStrings, gname, i != 0) for i, td in enumerate(top_dicts)
+        ]
+        model, model_cs = masterModel.getSubModel(all_cs)
+        # create the first pass CFF2 charstring, from
+        # the default charstring.
+        default_charstring = model_cs[0]
+        var_pen = CFF2CharStringMergePen([], gname, num_masters, 0)
+        # We need to override outlineExtractor because these
+        # charstrings do have widths in the 'program'; we need to drop these
+        # values rather than post assertion error for them.
+        default_charstring.outlineExtractor = MergeOutlineExtractor
+        default_charstring.draw(var_pen)
+
+        # Add the coordinates from all the other regions to the
+        # blend lists in the CFF2 charstring.
+        region_cs = model_cs[1:]
+        for region_idx, region_charstring in enumerate(region_cs, start=1):
+            var_pen.restart(region_idx)
+            region_charstring.outlineExtractor = MergeOutlineExtractor
+            region_charstring.draw(var_pen)
+
+        # Collapse each coordinate list to a blend operator and its args.
+        new_cs = var_pen.getCharString(
+            private=default_charstring.private,
+            globalSubrs=default_charstring.globalSubrs,
+            var_model=model,
+            optimize=True,
+        )
+        default_charstrings[gname] = new_cs
+
+        if not region_cs:
+            continue
+
+        if (not var_pen.seen_moveto) or ("blend" not in new_cs.program):
+            # If this is not a marking glyph, or if there are no blend
+            # arguments, then we can use vsindex 0. No need to
+            # check if we need a new vsindex.
+            continue
+
+        # If the charstring required a new model, create
+        # a VarData table to go with, and set vsindex.
+        key = tuple(v is not None for v in all_cs)
+        try:
+            vsindex = vsindex_by_key[key]
+        except KeyError:
+            vsindex = _add_new_vsindex(
+                model, key, masterSupports, vsindex_dict, vsindex_by_key, varDataList
+            )
+        # We do not need to check for an existing new_cs.private.vsindex,
+        # as we know it doesn't exist yet.
+        if vsindex != 0:
+            new_cs.program[:0] = [vsindex, "vsindex"]
+
+    # If there is no variation in any of the charstrings, then vsindex_dict
+    # never gets built. This could still be needed if there is variation
+    # in the PrivatDict, so we will build the default data for vsindex = 0.
+    if not vsindex_dict:
+        key = (True,) * num_masters
+        _add_new_vsindex(
+            masterModel, key, masterSupports, vsindex_dict, vsindex_by_key, varDataList
+        )
+    cvData = CVarData(
+        varDataList=varDataList,
+        masterSupports=masterSupports,
+        vsindex_dict=vsindex_dict,
+    )
+    # XXX To do: optimize use of vsindex between the PrivateDicts and
+    # charstrings
+    return cvData
+
+
+class CFFToCFF2OutlineExtractor(T2OutlineExtractor):
+    """This class is used to remove the initial width from the CFF
+    charstring without trying to add the width to self.nominalWidthX,
+    which is None."""
+
+    def popallWidth(self, evenOdd=0):
+        args = self.popall()
+        if not self.gotWidth:
+            if evenOdd ^ (len(args) % 2):
+                args = args[1:]
+            self.width = self.defaultWidthX
+            self.gotWidth = 1
+        return args
+
+
+class MergeOutlineExtractor(CFFToCFF2OutlineExtractor):
+    """Used to extract the charstring commands - including hints - from a
+    CFF charstring in order to merge it as another set of region data
+    into a CFF2 variable font charstring."""
+
+    def __init__(
+        self,
+        pen,
+        localSubrs,
+        globalSubrs,
+        nominalWidthX,
+        defaultWidthX,
+        private=None,
+        blender=None,
+    ):
+        super().__init__(
+            pen, localSubrs, globalSubrs, nominalWidthX, defaultWidthX, private, blender
+        )
+
+    def countHints(self):
+        args = self.popallWidth()
+        self.hintCount = self.hintCount + len(args) // 2
+        return args
+
+    def _hint_op(self, type, args):
+        self.pen.add_hint(type, args)
+
+    def op_hstem(self, index):
+        args = self.countHints()
+        self._hint_op("hstem", args)
+
+    def op_vstem(self, index):
+        args = self.countHints()
+        self._hint_op("vstem", args)
+
+    def op_hstemhm(self, index):
+        args = self.countHints()
+        self._hint_op("hstemhm", args)
+
+    def op_vstemhm(self, index):
+        args = self.countHints()
+        self._hint_op("vstemhm", args)
+
+    def _get_hintmask(self, index):
+        if not self.hintMaskBytes:
+            args = self.countHints()
+            if args:
+                self._hint_op("vstemhm", args)
+            self.hintMaskBytes = (self.hintCount + 7) // 8
+        hintMaskBytes, index = self.callingStack[-1].getBytes(index, self.hintMaskBytes)
+        return index, hintMaskBytes
+
+    def op_hintmask(self, index):
+        index, hintMaskBytes = self._get_hintmask(index)
+        self.pen.add_hintmask("hintmask", [hintMaskBytes])
+        return hintMaskBytes, index
+
+    def op_cntrmask(self, index):
+        index, hintMaskBytes = self._get_hintmask(index)
+        self.pen.add_hintmask("cntrmask", [hintMaskBytes])
+        return hintMaskBytes, index
+
+
+class CFF2CharStringMergePen(T2CharStringPen):
+    """Pen to merge Type 2 CharStrings."""
+
+    def __init__(
+        self, default_commands, glyphName, num_masters, master_idx, roundTolerance=0.01
+    ):
+        # For roundTolerance see https://github.com/fonttools/fonttools/issues/2838
+        super().__init__(
+            width=None, glyphSet=None, CFF2=True, roundTolerance=roundTolerance
+        )
+        self.pt_index = 0
+        self._commands = default_commands
+        self.m_index = master_idx
+        self.num_masters = num_masters
+        self.prev_move_idx = 0
+        self.seen_moveto = False
+        self.glyphName = glyphName
+        self.round = roundFunc(roundTolerance, round=round)
+
+    def add_point(self, point_type, pt_coords):
+        if self.m_index == 0:
+            self._commands.append([point_type, [pt_coords]])
+        else:
+            cmd = self._commands[self.pt_index]
+            if cmd[0] != point_type:
+                raise VarLibCFFPointTypeMergeError(
+                    point_type, self.pt_index, len(cmd[1]), cmd[0], self.glyphName
+                )
+            cmd[1].append(pt_coords)
+        self.pt_index += 1
+
+    def add_hint(self, hint_type, args):
+        if self.m_index == 0:
+            self._commands.append([hint_type, [args]])
+        else:
+            cmd = self._commands[self.pt_index]
+            if cmd[0] != hint_type:
+                raise VarLibCFFHintTypeMergeError(
+                    hint_type, self.pt_index, len(cmd[1]), cmd[0], self.glyphName
+                )
+            cmd[1].append(args)
+        self.pt_index += 1
+
+    def add_hintmask(self, hint_type, abs_args):
+        # For hintmask, fonttools.cffLib.specializer.py expects
+        # each of these to be represented by two sequential commands:
+        # first holding only the operator name, with an empty arg list,
+        # second with an empty string as the op name, and the mask arg list.
+        if self.m_index == 0:
+            self._commands.append([hint_type, []])
+            self._commands.append(["", [abs_args]])
+        else:
+            cmd = self._commands[self.pt_index]
+            if cmd[0] != hint_type:
+                raise VarLibCFFHintTypeMergeError(
+                    hint_type, self.pt_index, len(cmd[1]), cmd[0], self.glyphName
+                )
+            self.pt_index += 1
+            cmd = self._commands[self.pt_index]
+            cmd[1].append(abs_args)
+        self.pt_index += 1
+
+    def _moveTo(self, pt):
+        if not self.seen_moveto:
+            self.seen_moveto = True
+        pt_coords = self._p(pt)
+        self.add_point("rmoveto", pt_coords)
+        # I set prev_move_idx here because add_point()
+        # can change self.pt_index.
+        self.prev_move_idx = self.pt_index - 1
+
+    def _lineTo(self, pt):
+        pt_coords = self._p(pt)
+        self.add_point("rlineto", pt_coords)
+
+    def _curveToOne(self, pt1, pt2, pt3):
+        _p = self._p
+        pt_coords = _p(pt1) + _p(pt2) + _p(pt3)
+        self.add_point("rrcurveto", pt_coords)
+
+    def _closePath(self):
+        pass
+
+    def _endPath(self):
+        pass
+
+    def restart(self, region_idx):
+        self.pt_index = 0
+        self.m_index = region_idx
+        self._p0 = (0, 0)
+
+    def getCommands(self):
+        return self._commands
+
+    def reorder_blend_args(self, commands, get_delta_func):
+        """
+        We first re-order the master coordinate values.
+        For a moveto to lineto, the args are now arranged as::
+
+                [ [master_0 x,y], [master_1 x,y], [master_2 x,y] ]
+
+        We re-arrange this to::
+
+                [	[master_0 x, master_1 x, master_2 x],
+                        [master_0 y, master_1 y, master_2 y]
+                ]
+
+        If the master values are all the same, we collapse the list to
+        as single value instead of a list.
+
+        We then convert this to::
+
+                [ [master_0 x] + [x delta tuple] + [numBlends=1]
+                  [master_0 y] + [y delta tuple] + [numBlends=1]
+                ]
+        """
+        for cmd in commands:
+            # arg[i] is the set of arguments for this operator from master i.
+            args = cmd[1]
+            m_args = zip(*args)
+            # m_args[n] is now all num_master args for the i'th argument
+            # for this operation.
+            cmd[1] = list(m_args)
+        lastOp = None
+        for cmd in commands:
+            op = cmd[0]
+            # masks are represented by two cmd's: first has only op names,
+            # second has only args.
+            if lastOp in ["hintmask", "cntrmask"]:
+                coord = list(cmd[1])
+                if not allEqual(coord):
+                    raise VarLibMergeError(
+                        "Hintmask values cannot differ between source fonts."
+                    )
+                cmd[1] = [coord[0][0]]
+            else:
+                coords = cmd[1]
+                new_coords = []
+                for coord in coords:
+                    if allEqual(coord):
+                        new_coords.append(coord[0])
+                    else:
+                        # convert to deltas
+                        deltas = get_delta_func(coord)[1:]
+                        coord = [coord[0]] + deltas
+                        coord.append(1)
+                        new_coords.append(coord)
+                cmd[1] = new_coords
+            lastOp = op
+        return commands
+
+    def getCharString(
+        self, private=None, globalSubrs=None, var_model=None, optimize=True
+    ):
+        commands = self._commands
+        commands = self.reorder_blend_args(
+            commands, partial(var_model.getDeltas, round=self.round)
+        )
+        if optimize:
+            commands = specializeCommands(
+                commands, generalizeFirst=False, maxstack=maxStackLimit
+            )
+        program = commandsToProgram(commands)
+        charString = T2CharString(
+            program=program, private=private, globalSubrs=globalSubrs
+        )
+        return charString

venv/lib/python3.12/site-packages/fontTools/varLib/errors.py

@@ -0,0 +1,219 @@
+import textwrap
+
+
+class VarLibError(Exception):
+    """Base exception for the varLib module."""
+
+
+class VarLibValidationError(VarLibError):
+    """Raised when input data is invalid from varLib's point of view."""
+
+
+class VarLibMergeError(VarLibError):
+    """Raised when input data cannot be merged into a variable font."""
+
+    def __init__(self, merger=None, **kwargs):
+        self.merger = merger
+        if not kwargs:
+            kwargs = {}
+        if "stack" in kwargs:
+            self.stack = kwargs["stack"]
+            del kwargs["stack"]
+        else:
+            self.stack = []
+        self.cause = kwargs
+
+    @property
+    def reason(self):
+        return self.__doc__
+
+    def _master_name(self, ix):
+        if self.merger is not None:
+            ttf = self.merger.ttfs[ix]
+            if "name" in ttf and ttf["name"].getBestFullName():
+                return ttf["name"].getBestFullName()
+            elif hasattr(ttf.reader, "file") and hasattr(ttf.reader.file, "name"):
+                return ttf.reader.file.name
+        return f"master number {ix}"
+
+    @property
+    def offender(self):
+        if "expected" in self.cause and "got" in self.cause:
+            index = [x == self.cause["expected"] for x in self.cause["got"]].index(
+                False
+            )
+            master_name = self._master_name(index)
+            if "location" in self.cause:
+                master_name = f"{master_name} ({self.cause['location']})"
+            return index, master_name
+        return None, None
+
+    @property
+    def details(self):
+        if "expected" in self.cause and "got" in self.cause:
+            offender_index, offender = self.offender
+            got = self.cause["got"][offender_index]
+            return f"Expected to see {self.stack[0]}=={self.cause['expected']!r}, instead saw {got!r}\n"
+        return ""
+
+    def __str__(self):
+        offender_index, offender = self.offender
+        location = ""
+        if offender:
+            location = f"\n\nThe problem is likely to be in {offender}:\n"
+        context = "".join(reversed(self.stack))
+        basic = textwrap.fill(
+            f"Couldn't merge the fonts, because {self.reason}. "
+            f"This happened while performing the following operation: {context}",
+            width=78,
+        )
+        return "\n\n" + basic + location + self.details
+
+
+class ShouldBeConstant(VarLibMergeError):
+    """some values were different, but should have been the same"""
+
+    @property
+    def details(self):
+        basic_message = super().details
+
+        if self.stack[0] != ".FeatureCount" or self.merger is None:
+            return basic_message
+
+        assert self.stack[0] == ".FeatureCount"
+        offender_index, _ = self.offender
+        bad_ttf = self.merger.ttfs[offender_index]
+        good_ttf = next(
+            ttf
+            for ttf in self.merger.ttfs
+            if self.stack[-1] in ttf
+            and ttf[self.stack[-1]].table.FeatureList.FeatureCount
+            == self.cause["expected"]
+        )
+
+        good_features = [
+            x.FeatureTag
+            for x in good_ttf[self.stack[-1]].table.FeatureList.FeatureRecord
+        ]
+        bad_features = [
+            x.FeatureTag
+            for x in bad_ttf[self.stack[-1]].table.FeatureList.FeatureRecord
+        ]
+        return basic_message + (
+            "\nIncompatible features between masters.\n"
+            f"Expected: {', '.join(good_features)}.\n"
+            f"Got: {', '.join(bad_features)}.\n"
+        )
+
+
+class FoundANone(VarLibMergeError):
+    """one of the values in a list was empty when it shouldn't have been"""
+
+    @property
+    def offender(self):
+        index = [x is None for x in self.cause["got"]].index(True)
+        return index, self._master_name(index)
+
+    @property
+    def details(self):
+        cause, stack = self.cause, self.stack
+        return f"{stack[0]}=={cause['got']}\n"
+
+
+class NotANone(VarLibMergeError):
+    """one of the values in a list was not empty when it should have been"""
+
+    @property
+    def offender(self):
+        index = [x is not None for x in self.cause["got"]].index(True)
+        return index, self._master_name(index)
+
+    @property
+    def details(self):
+        cause, stack = self.cause, self.stack
+        return f"{stack[0]}=={cause['got']}\n"
+
+
+class MismatchedTypes(VarLibMergeError):
+    """data had inconsistent types"""
+
+
+class LengthsDiffer(VarLibMergeError):
+    """a list of objects had inconsistent lengths"""
+
+
+class KeysDiffer(VarLibMergeError):
+    """a list of objects had different keys"""
+
+
+class InconsistentGlyphOrder(VarLibMergeError):
+    """the glyph order was inconsistent between masters"""
+
+
+class InconsistentExtensions(VarLibMergeError):
+    """the masters use extension lookups in inconsistent ways"""
+
+
+class UnsupportedFormat(VarLibMergeError):
+    """an OpenType subtable (%s) had a format I didn't expect"""
+
+    def __init__(self, merger=None, **kwargs):
+        super().__init__(merger, **kwargs)
+        if not self.stack:
+            self.stack = [".Format"]
+
+    @property
+    def reason(self):
+        s = self.__doc__ % self.cause["subtable"]
+        if "value" in self.cause:
+            s += f" ({self.cause['value']!r})"
+        return s
+
+
+class InconsistentFormats(UnsupportedFormat):
+    """an OpenType subtable (%s) had inconsistent formats between masters"""
+
+
+class VarLibCFFMergeError(VarLibError):
+    pass
+
+
+class VarLibCFFDictMergeError(VarLibCFFMergeError):
+    """Raised when a CFF PrivateDict cannot be merged."""
+
+    def __init__(self, key, value, values):
+        error_msg = (
+            f"For the Private Dict key '{key}', the default font value list:"
+            f"\n\t{value}\nhad a different number of values than a region font:"
+        )
+        for region_value in values:
+            error_msg += f"\n\t{region_value}"
+        self.args = (error_msg,)
+
+
+class VarLibCFFPointTypeMergeError(VarLibCFFMergeError):
+    """Raised when a CFF glyph cannot be merged because of point type differences."""
+
+    def __init__(self, point_type, pt_index, m_index, default_type, glyph_name):
+        error_msg = (
+            f"Glyph '{glyph_name}': '{point_type}' at point index {pt_index} in "
+            f"master index {m_index} differs from the default font point type "
+            f"'{default_type}'"
+        )
+        self.args = (error_msg,)
+
+
+class VarLibCFFHintTypeMergeError(VarLibCFFMergeError):
+    """Raised when a CFF glyph cannot be merged because of hint type differences."""
+
+    def __init__(self, hint_type, cmd_index, m_index, default_type, glyph_name):
+        error_msg = (
+            f"Glyph '{glyph_name}': '{hint_type}' at index {cmd_index} in "
+            f"master index {m_index} differs from the default font hint type "
+            f"'{default_type}'"
+        )
+        self.args = (error_msg,)
+
+
+class VariationModelError(VarLibError):
+    """Raised when a variation model is faulty."""

venv/lib/python3.12/site-packages/fontTools/varLib/featureVars.py

@@ -0,0 +1,689 @@
+"""Module to build FeatureVariation tables:
+https://docs.microsoft.com/en-us/typography/opentype/spec/chapter2#featurevariations-table
+
+NOTE: The API is experimental and subject to change.
+"""
+
+from fontTools.misc.dictTools import hashdict
+from fontTools.misc.intTools import bit_count
+from fontTools.ttLib import newTable
+from fontTools.ttLib.tables import otTables as ot
+from fontTools.ttLib.ttVisitor import TTVisitor
+from fontTools.otlLib.builder import buildLookup, buildSingleSubstSubtable
+from collections import OrderedDict
+
+from .errors import VarLibError, VarLibValidationError
+
+
+def addFeatureVariations(font, conditionalSubstitutions, featureTag="rvrn"):
+    """Add conditional substitutions to a Variable Font.
+
+    The `conditionalSubstitutions` argument is a list of (Region, Substitutions)
+    tuples.
+
+    A Region is a list of Boxes. A Box is a dict mapping axisTags to
+    (minValue, maxValue) tuples. Irrelevant axes may be omitted and they are
+    interpretted as extending to end of axis in each direction.  A Box represents
+    an orthogonal 'rectangular' subset of an N-dimensional design space.
+    A Region represents a more complex subset of an N-dimensional design space,
+    ie. the union of all the Boxes in the Region.
+    For efficiency, Boxes within a Region should ideally not overlap, but
+    functionality is not compromised if they do.
+
+    The minimum and maximum values are expressed in normalized coordinates.
+
+    A Substitution is a dict mapping source glyph names to substitute glyph names.
+
+    Example:
+
+    # >>> f = TTFont(srcPath)
+    # >>> condSubst = [
+    # ...     # A list of (Region, Substitution) tuples.
+    # ...     ([{"wdth": (0.5, 1.0)}], {"cent": "cent.rvrn"}),
+    # ...     ([{"wght": (0.5, 1.0)}], {"dollar": "dollar.rvrn"}),
+    # ... ]
+    # >>> addFeatureVariations(f, condSubst)
+    # >>> f.save(dstPath)
+
+    The `featureTag` parameter takes either a str or a iterable of str (the single str
+    is kept for backwards compatibility), and defines which feature(s) will be
+    associated with the feature variations.
+    Note, if this is "rvrn", then the substitution lookup will be inserted at the
+    beginning of the lookup list so that it is processed before others, otherwise
+    for any other feature tags it will be appended last.
+    """
+
+    # process first when "rvrn" is the only listed tag
+    featureTags = [featureTag] if isinstance(featureTag, str) else sorted(featureTag)
+    processLast = "rvrn" not in featureTags or len(featureTags) > 1
+
+    _checkSubstitutionGlyphsExist(
+        glyphNames=set(font.getGlyphOrder()),
+        substitutions=conditionalSubstitutions,
+    )
+
+    substitutions = overlayFeatureVariations(conditionalSubstitutions)
+
+    # turn substitution dicts into tuples of tuples, so they are hashable
+    conditionalSubstitutions, allSubstitutions = makeSubstitutionsHashable(
+        substitutions
+    )
+    if "GSUB" not in font:
+        font["GSUB"] = buildGSUB()
+    else:
+        existingTags = _existingVariableFeatures(font["GSUB"].table).intersection(
+            featureTags
+        )
+        if existingTags:
+            raise VarLibError(
+                f"FeatureVariations already exist for feature tag(s): {existingTags}"
+            )
+
+    # setup lookups
+    lookupMap = buildSubstitutionLookups(
+        font["GSUB"].table, allSubstitutions, processLast
+    )
+
+    # addFeatureVariationsRaw takes a list of
+    #  ( {condition}, [ lookup indices ] )
+    # so rearrange our lookups to match
+    conditionsAndLookups = []
+    for conditionSet, substitutions in conditionalSubstitutions:
+        conditionsAndLookups.append(
+            (conditionSet, [lookupMap[s] for s in substitutions])
+        )
+
+    addFeatureVariationsRaw(font, font["GSUB"].table, conditionsAndLookups, featureTags)
+
+
+def _existingVariableFeatures(table):
+    existingFeatureVarsTags = set()
+    if hasattr(table, "FeatureVariations") and table.FeatureVariations is not None:
+        features = table.FeatureList.FeatureRecord
+        for fvr in table.FeatureVariations.FeatureVariationRecord:
+            for ftsr in fvr.FeatureTableSubstitution.SubstitutionRecord:
+                existingFeatureVarsTags.add(features[ftsr.FeatureIndex].FeatureTag)
+    return existingFeatureVarsTags
+
+
+def _checkSubstitutionGlyphsExist(glyphNames, substitutions):
+    referencedGlyphNames = set()
+    for _, substitution in substitutions:
+        referencedGlyphNames |= substitution.keys()
+        referencedGlyphNames |= set(substitution.values())
+    missing = referencedGlyphNames - glyphNames
+    if missing:
+        raise VarLibValidationError(
+            "Missing glyphs are referenced in conditional substitution rules:"
+            f" {', '.join(missing)}"
+        )
+
+
+def overlayFeatureVariations(conditionalSubstitutions):
+    """Compute overlaps between all conditional substitutions.
+
+    The `conditionalSubstitutions` argument is a list of (Region, Substitutions)
+    tuples.
+
+    A Region is a list of Boxes. A Box is a dict mapping axisTags to
+    (minValue, maxValue) tuples. Irrelevant axes may be omitted and they are
+    interpretted as extending to end of axis in each direction.  A Box represents
+    an orthogonal 'rectangular' subset of an N-dimensional design space.
+    A Region represents a more complex subset of an N-dimensional design space,
+    ie. the union of all the Boxes in the Region.
+    For efficiency, Boxes within a Region should ideally not overlap, but
+    functionality is not compromised if they do.
+
+    The minimum and maximum values are expressed in normalized coordinates.
+
+    A Substitution is a dict mapping source glyph names to substitute glyph names.
+
+    Returns data is in similar but different format.  Overlaps of distinct
+    substitution Boxes (*not* Regions) are explicitly listed as distinct rules,
+    and rules with the same Box merged.  The more specific rules appear earlier
+    in the resulting list.  Moreover, instead of just a dictionary of substitutions,
+    a list of dictionaries is returned for substitutions corresponding to each
+    unique space, with each dictionary being identical to one of the input
+    substitution dictionaries.  These dictionaries are not merged to allow data
+    sharing when they are converted into font tables.
+
+    Example::
+
+        >>> condSubst = [
+        ...     # A list of (Region, Substitution) tuples.
+        ...     ([{"wght": (0.5, 1.0)}], {"dollar": "dollar.rvrn"}),
+        ...     ([{"wght": (0.5, 1.0)}], {"dollar": "dollar.rvrn"}),
+        ...     ([{"wdth": (0.5, 1.0)}], {"cent": "cent.rvrn"}),
+        ...     ([{"wght": (0.5, 1.0), "wdth": (-1, 1.0)}], {"dollar": "dollar.rvrn"}),
+        ... ]
+        >>> from pprint import pprint
+        >>> pprint(overlayFeatureVariations(condSubst))
+        [({'wdth': (0.5, 1.0), 'wght': (0.5, 1.0)},
+          [{'dollar': 'dollar.rvrn'}, {'cent': 'cent.rvrn'}]),
+         ({'wdth': (0.5, 1.0)}, [{'cent': 'cent.rvrn'}]),
+         ({'wght': (0.5, 1.0)}, [{'dollar': 'dollar.rvrn'}])]
+
+    """
+
+    # Merge same-substitutions rules, as this creates fewer number oflookups.
+    merged = OrderedDict()
+    for value, key in conditionalSubstitutions:
+        key = hashdict(key)
+        if key in merged:
+            merged[key].extend(value)
+        else:
+            merged[key] = value
+    conditionalSubstitutions = [(v, dict(k)) for k, v in merged.items()]
+    del merged
+
+    # Merge same-region rules, as this is cheaper.
+    # Also convert boxes to hashdict()
+    #
+    # Reversing is such that earlier entries win in case of conflicting substitution
+    # rules for the same region.
+    merged = OrderedDict()
+    for key, value in reversed(conditionalSubstitutions):
+        key = tuple(
+            sorted(
+                (hashdict(cleanupBox(k)) for k in key),
+                key=lambda d: tuple(sorted(d.items())),
+            )
+        )
+        if key in merged:
+            merged[key].update(value)
+        else:
+            merged[key] = dict(value)
+    conditionalSubstitutions = list(reversed(merged.items()))
+    del merged
+
+    # Overlay
+    #
+    # Rank is the bit-set of the index of all contributing layers.
+    initMapInit = ((hashdict(), 0),)  # Initializer representing the entire space
+    boxMap = OrderedDict(initMapInit)  # Map from Box to Rank
+    for i, (currRegion, _) in enumerate(conditionalSubstitutions):
+        newMap = OrderedDict(initMapInit)
+        currRank = 1 << i
+        for box, rank in boxMap.items():
+            for currBox in currRegion:
+                intersection, remainder = overlayBox(currBox, box)
+                if intersection is not None:
+                    intersection = hashdict(intersection)
+                    newMap[intersection] = newMap.get(intersection, 0) | rank | currRank
+                if remainder is not None:
+                    remainder = hashdict(remainder)
+                    newMap[remainder] = newMap.get(remainder, 0) | rank
+        boxMap = newMap
+
+    # Generate output
+    items = []
+    for box, rank in sorted(
+        boxMap.items(), key=(lambda BoxAndRank: -bit_count(BoxAndRank[1]))
+    ):
+        # Skip any box that doesn't have any substitution.
+        if rank == 0:
+            continue
+        substsList = []
+        i = 0
+        while rank:
+            if rank & 1:
+                substsList.append(conditionalSubstitutions[i][1])
+            rank >>= 1
+            i += 1
+        items.append((dict(box), substsList))
+    return items
+
+
+#
+# Terminology:
+#
+# A 'Box' is a dict representing an orthogonal "rectangular" bit of N-dimensional space.
+# The keys in the dict are axis tags, the values are (minValue, maxValue) tuples.
+# Missing dimensions (keys) are substituted by the default min and max values
+# from the corresponding axes.
+#
+
+
+def overlayBox(top, bot):
+    """Overlays ``top`` box on top of ``bot`` box.
+
+    Returns two items:
+
+    * Box for intersection of ``top`` and ``bot``, or None if they don't intersect.
+    * Box for remainder of ``bot``.  Remainder box might not be exact (since the
+      remainder might not be a simple box), but is inclusive of the exact
+      remainder.
+    """
+
+    # Intersection
+    intersection = {}
+    intersection.update(top)
+    intersection.update(bot)
+    for axisTag in set(top) & set(bot):
+        min1, max1 = top[axisTag]
+        min2, max2 = bot[axisTag]
+        minimum = max(min1, min2)
+        maximum = min(max1, max2)
+        if not minimum < maximum:
+            return None, bot  # Do not intersect
+        intersection[axisTag] = minimum, maximum
+
+    # Remainder
+    #
+    # Remainder is empty if bot's each axis range lies within that of intersection.
+    #
+    # Remainder is shrank if bot's each, except for exactly one, axis range lies
+    # within that of intersection, and that one axis, it extrudes out of the
+    # intersection only on one side.
+    #
+    # Bot is returned in full as remainder otherwise, as true remainder is not
+    # representable as a single box.
+
+    remainder = dict(bot)
+    extruding = False
+    fullyInside = True
+    for axisTag in top:
+        if axisTag in bot:
+            continue
+        extruding = True
+        fullyInside = False
+        break
+    for axisTag in bot:
+        if axisTag not in top:
+            continue  # Axis range lies fully within
+        min1, max1 = intersection[axisTag]
+        min2, max2 = bot[axisTag]
+        if min1 <= min2 and max2 <= max1:
+            continue  # Axis range lies fully within
+
+        # Bot's range doesn't fully lie within that of top's for this axis.
+        # We know they intersect, so it cannot lie fully without either; so they
+        # overlap.
+
+        # If we have had an overlapping axis before, remainder is not
+        # representable as a box, so return full bottom and go home.
+        if extruding:
+            return intersection, bot
+        extruding = True
+        fullyInside = False
+
+        # Otherwise, cut remainder on this axis and continue.
+        if min1 <= min2:
+            # Right side survives.
+            minimum = max(max1, min2)
+            maximum = max2
+        elif max2 <= max1:
+            # Left side survives.
+            minimum = min2
+            maximum = min(min1, max2)
+        else:
+            # Remainder leaks out from both sides.  Can't cut either.
+            return intersection, bot
+
+        remainder[axisTag] = minimum, maximum
+
+    if fullyInside:
+        # bot is fully within intersection.  Remainder is empty.
+        return intersection, None
+
+    return intersection, remainder
+
+
+def cleanupBox(box):
+    """Return a sparse copy of `box`, without redundant (default) values.
+
+    >>> cleanupBox({})
+    {}
+    >>> cleanupBox({'wdth': (0.0, 1.0)})
+    {'wdth': (0.0, 1.0)}
+    >>> cleanupBox({'wdth': (-1.0, 1.0)})
+    {}
+
+    """
+    return {tag: limit for tag, limit in box.items() if limit != (-1.0, 1.0)}
+
+
+#
+# Low level implementation
+#
+
+
+def addFeatureVariationsRaw(font, table, conditionalSubstitutions, featureTag="rvrn"):
+    """Low level implementation of addFeatureVariations that directly
+    models the possibilities of the FeatureVariations table."""
+
+    featureTags = [featureTag] if isinstance(featureTag, str) else sorted(featureTag)
+    processLast = "rvrn" not in featureTags or len(featureTags) > 1
+
+    #
+    # if a <featureTag> feature is not present:
+    #     make empty <featureTag> feature
+    #     sort features, get <featureTag> feature index
+    #     add <featureTag> feature to all scripts
+    # if a <featureTag> feature is present:
+    #     reuse <featureTag> feature index
+    # make lookups
+    # add feature variations
+    #
+    if table.Version < 0x00010001:
+        table.Version = 0x00010001  # allow table.FeatureVariations
+
+    varFeatureIndices = set()
+
+    existingTags = {
+        feature.FeatureTag
+        for feature in table.FeatureList.FeatureRecord
+        if feature.FeatureTag in featureTags
+    }
+
+    newTags = set(featureTags) - existingTags
+    if newTags:
+        varFeatures = []
+        for featureTag in sorted(newTags):
+            varFeature = buildFeatureRecord(featureTag, [])
+            table.FeatureList.FeatureRecord.append(varFeature)
+            varFeatures.append(varFeature)
+        table.FeatureList.FeatureCount = len(table.FeatureList.FeatureRecord)
+
+        sortFeatureList(table)
+
+        for varFeature in varFeatures:
+            varFeatureIndex = table.FeatureList.FeatureRecord.index(varFeature)
+
+            for scriptRecord in table.ScriptList.ScriptRecord:
+                if scriptRecord.Script.DefaultLangSys is None:
+                    raise VarLibError(
+                        "Feature variations require that the script "
+                        f"'{scriptRecord.ScriptTag}' defines a default language system."
+                    )
+                langSystems = [lsr.LangSys for lsr in scriptRecord.Script.LangSysRecord]
+                for langSys in [scriptRecord.Script.DefaultLangSys] + langSystems:
+                    langSys.FeatureIndex.append(varFeatureIndex)
+                    langSys.FeatureCount = len(langSys.FeatureIndex)
+            varFeatureIndices.add(varFeatureIndex)
+
+    if existingTags:
+        # indices may have changed if we inserted new features and sorted feature list
+        # so we must do this after the above
+        varFeatureIndices.update(
+            index
+            for index, feature in enumerate(table.FeatureList.FeatureRecord)
+            if feature.FeatureTag in existingTags
+        )
+
+    axisIndices = {
+        axis.axisTag: axisIndex for axisIndex, axis in enumerate(font["fvar"].axes)
+    }
+
+    hasFeatureVariations = (
+        hasattr(table, "FeatureVariations") and table.FeatureVariations is not None
+    )
+
+    featureVariationRecords = []
+    for conditionSet, lookupIndices in conditionalSubstitutions:
+        conditionTable = []
+        for axisTag, (minValue, maxValue) in sorted(conditionSet.items()):
+            if minValue > maxValue:
+                raise VarLibValidationError(
+                    "A condition set has a minimum value above the maximum value."
+                )
+            ct = buildConditionTable(axisIndices[axisTag], minValue, maxValue)
+            conditionTable.append(ct)
+        records = []
+        for varFeatureIndex in sorted(varFeatureIndices):
+            existingLookupIndices = table.FeatureList.FeatureRecord[
+                varFeatureIndex
+            ].Feature.LookupListIndex
+            combinedLookupIndices = (
+                existingLookupIndices + lookupIndices
+                if processLast
+                else lookupIndices + existingLookupIndices
+            )
+
+            records.append(
+                buildFeatureTableSubstitutionRecord(
+                    varFeatureIndex, combinedLookupIndices
+                )
+            )
+        if hasFeatureVariations and (
+            fvr := findFeatureVariationRecord(table.FeatureVariations, conditionTable)
+        ):
+            fvr.FeatureTableSubstitution.SubstitutionRecord.extend(records)
+            fvr.FeatureTableSubstitution.SubstitutionCount = len(
+                fvr.FeatureTableSubstitution.SubstitutionRecord
+            )
+        else:
+            featureVariationRecords.append(
+                buildFeatureVariationRecord(conditionTable, records)
+            )
+
+    if hasFeatureVariations:
+        if table.FeatureVariations.Version != 0x00010000:
+            raise VarLibError(
+                "Unsupported FeatureVariations table version: "
+                f"0x{table.FeatureVariations.Version:08x} (expected 0x00010000)."
+            )
+        table.FeatureVariations.FeatureVariationRecord.extend(featureVariationRecords)
+        table.FeatureVariations.FeatureVariationCount = len(
+            table.FeatureVariations.FeatureVariationRecord
+        )
+    else:
+        table.FeatureVariations = buildFeatureVariations(featureVariationRecords)
+
+
+#
+# Building GSUB/FeatureVariations internals
+#
+
+
+def buildGSUB():
+    """Build a GSUB table from scratch."""
+    fontTable = newTable("GSUB")
+    gsub = fontTable.table = ot.GSUB()
+    gsub.Version = 0x00010001  # allow gsub.FeatureVariations
+
+    gsub.ScriptList = ot.ScriptList()
+    gsub.ScriptList.ScriptRecord = []
+    gsub.FeatureList = ot.FeatureList()
+    gsub.FeatureList.FeatureRecord = []
+    gsub.LookupList = ot.LookupList()
+    gsub.LookupList.Lookup = []
+
+    srec = ot.ScriptRecord()
+    srec.ScriptTag = "DFLT"
+    srec.Script = ot.Script()
+    srec.Script.DefaultLangSys = None
+    srec.Script.LangSysRecord = []
+    srec.Script.LangSysCount = 0
+
+    langrec = ot.LangSysRecord()
+    langrec.LangSys = ot.LangSys()
+    langrec.LangSys.ReqFeatureIndex = 0xFFFF
+    langrec.LangSys.FeatureIndex = []
+    srec.Script.DefaultLangSys = langrec.LangSys
+
+    gsub.ScriptList.ScriptRecord.append(srec)
+    gsub.ScriptList.ScriptCount = 1
+    gsub.FeatureVariations = None
+
+    return fontTable
+
+
+def makeSubstitutionsHashable(conditionalSubstitutions):
+    """Turn all the substitution dictionaries in sorted tuples of tuples so
+    they are hashable, to detect duplicates so we don't write out redundant
+    data."""
+    allSubstitutions = set()
+    condSubst = []
+    for conditionSet, substitutionMaps in conditionalSubstitutions:
+        substitutions = []
+        for substitutionMap in substitutionMaps:
+            subst = tuple(sorted(substitutionMap.items()))
+            substitutions.append(subst)
+            allSubstitutions.add(subst)
+        condSubst.append((conditionSet, substitutions))
+    return condSubst, sorted(allSubstitutions)
+
+
+class ShifterVisitor(TTVisitor):
+    def __init__(self, shift):
+        self.shift = shift
+
+
+@ShifterVisitor.register_attr(ot.Feature, "LookupListIndex")  # GSUB/GPOS
+def visit(visitor, obj, attr, value):
+    shift = visitor.shift
+    value = [l + shift for l in value]
+    setattr(obj, attr, value)
+
+
+@ShifterVisitor.register_attr(
+    (ot.SubstLookupRecord, ot.PosLookupRecord), "LookupListIndex"
+)
+def visit(visitor, obj, attr, value):
+    setattr(obj, attr, visitor.shift + value)
+
+
+def buildSubstitutionLookups(gsub, allSubstitutions, processLast=False):
+    """Build the lookups for the glyph substitutions, return a dict mapping
+    the substitution to lookup indices."""
+
+    # Insert lookups at the beginning of the lookup vector
+    # https://github.com/googlefonts/fontmake/issues/950
+
+    firstIndex = len(gsub.LookupList.Lookup) if processLast else 0
+    lookupMap = {}
+    for i, substitutionMap in enumerate(allSubstitutions):
+        lookupMap[substitutionMap] = firstIndex + i
+
+    if not processLast:
+        # Shift all lookup indices in gsub by len(allSubstitutions)
+        shift = len(allSubstitutions)
+        visitor = ShifterVisitor(shift)
+        visitor.visit(gsub.FeatureList.FeatureRecord)
+        visitor.visit(gsub.LookupList.Lookup)
+
+    for i, subst in enumerate(allSubstitutions):
+        substMap = dict(subst)
+        lookup = buildLookup([buildSingleSubstSubtable(substMap)])
+        if processLast:
+            gsub.LookupList.Lookup.append(lookup)
+        else:
+            gsub.LookupList.Lookup.insert(i, lookup)
+        assert gsub.LookupList.Lookup[lookupMap[subst]] is lookup
+    gsub.LookupList.LookupCount = len(gsub.LookupList.Lookup)
+    return lookupMap
+
+
+def buildFeatureVariations(featureVariationRecords):
+    """Build the FeatureVariations subtable."""
+    fv = ot.FeatureVariations()
+    fv.Version = 0x00010000
+    fv.FeatureVariationRecord = featureVariationRecords
+    fv.FeatureVariationCount = len(featureVariationRecords)
+    return fv
+
+
+def buildFeatureRecord(featureTag, lookupListIndices):
+    """Build a FeatureRecord."""
+    fr = ot.FeatureRecord()
+    fr.FeatureTag = featureTag
+    fr.Feature = ot.Feature()
+    fr.Feature.LookupListIndex = lookupListIndices
+    fr.Feature.populateDefaults()
+    return fr
+
+
+def buildFeatureVariationRecord(conditionTable, substitutionRecords):
+    """Build a FeatureVariationRecord."""
+    fvr = ot.FeatureVariationRecord()
+    fvr.ConditionSet = ot.ConditionSet()
+    fvr.ConditionSet.ConditionTable = conditionTable
+    fvr.ConditionSet.ConditionCount = len(conditionTable)
+    fvr.FeatureTableSubstitution = ot.FeatureTableSubstitution()
+    fvr.FeatureTableSubstitution.Version = 0x00010000
+    fvr.FeatureTableSubstitution.SubstitutionRecord = substitutionRecords
+    fvr.FeatureTableSubstitution.SubstitutionCount = len(substitutionRecords)
+    return fvr
+
+
+def buildFeatureTableSubstitutionRecord(featureIndex, lookupListIndices):
+    """Build a FeatureTableSubstitutionRecord."""
+    ftsr = ot.FeatureTableSubstitutionRecord()
+    ftsr.FeatureIndex = featureIndex
+    ftsr.Feature = ot.Feature()
+    ftsr.Feature.LookupListIndex = lookupListIndices
+    ftsr.Feature.LookupCount = len(lookupListIndices)
+    return ftsr
+
+
+def buildConditionTable(axisIndex, filterRangeMinValue, filterRangeMaxValue):
+    """Build a ConditionTable."""
+    ct = ot.ConditionTable()
+    ct.Format = 1
+    ct.AxisIndex = axisIndex
+    ct.FilterRangeMinValue = filterRangeMinValue
+    ct.FilterRangeMaxValue = filterRangeMaxValue
+    return ct
+
+
+def findFeatureVariationRecord(featureVariations, conditionTable):
+    """Find a FeatureVariationRecord that has the same conditionTable."""
+    if featureVariations.Version != 0x00010000:
+        raise VarLibError(
+            "Unsupported FeatureVariations table version: "
+            f"0x{featureVariations.Version:08x} (expected 0x00010000)."
+        )
+
+    for fvr in featureVariations.FeatureVariationRecord:
+        if conditionTable == fvr.ConditionSet.ConditionTable:
+            return fvr
+
+    return None
+
+
+def sortFeatureList(table):
+    """Sort the feature list by feature tag, and remap the feature indices
+    elsewhere. This is needed after the feature list has been modified.
+    """
+    # decorate, sort, undecorate, because we need to make an index remapping table
+    tagIndexFea = [
+        (fea.FeatureTag, index, fea)
+        for index, fea in enumerate(table.FeatureList.FeatureRecord)
+    ]
+    tagIndexFea.sort()
+    table.FeatureList.FeatureRecord = [fea for tag, index, fea in tagIndexFea]
+    featureRemap = dict(
+        zip([index for tag, index, fea in tagIndexFea], range(len(tagIndexFea)))
+    )
+
+    # Remap the feature indices
+    remapFeatures(table, featureRemap)
+
+
+def remapFeatures(table, featureRemap):
+    """Go through the scripts list, and remap feature indices."""
+    for scriptIndex, script in enumerate(table.ScriptList.ScriptRecord):
+        defaultLangSys = script.Script.DefaultLangSys
+        if defaultLangSys is not None:
+            _remapLangSys(defaultLangSys, featureRemap)
+        for langSysRecordIndex, langSysRec in enumerate(script.Script.LangSysRecord):
+            langSys = langSysRec.LangSys
+            _remapLangSys(langSys, featureRemap)
+
+    if hasattr(table, "FeatureVariations") and table.FeatureVariations is not None:
+        for fvr in table.FeatureVariations.FeatureVariationRecord:
+            for ftsr in fvr.FeatureTableSubstitution.SubstitutionRecord:
+                ftsr.FeatureIndex = featureRemap[ftsr.FeatureIndex]
+
+
+def _remapLangSys(langSys, featureRemap):
+    if langSys.ReqFeatureIndex != 0xFFFF:
+        langSys.ReqFeatureIndex = featureRemap[langSys.ReqFeatureIndex]
+    langSys.FeatureIndex = [featureRemap[index] for index in langSys.FeatureIndex]
+
+
+if __name__ == "__main__":
+    import doctest, sys
+
+    sys.exit(doctest.testmod().failed)

venv/lib/python3.12/site-packages/fontTools/varLib/instancer/__main__.py

@@ -0,0 +1,5 @@
+import sys
+from fontTools.varLib.instancer import main
+
+if __name__ == "__main__":
+    sys.exit(main())

venv/lib/python3.12/site-packages/fontTools/varLib/instancer/featureVars.py

@@ -0,0 +1,190 @@
+from fontTools.ttLib.tables import otTables as ot
+from copy import deepcopy
+import logging
+
+
+log = logging.getLogger("fontTools.varLib.instancer")
+
+
+def _featureVariationRecordIsUnique(rec, seen):
+    conditionSet = []
+    conditionSets = (
+        rec.ConditionSet.ConditionTable if rec.ConditionSet is not None else []
+    )
+    for cond in conditionSets:
+        if cond.Format != 1:
+            # can't tell whether this is duplicate, assume is unique
+            return True
+        conditionSet.append(
+            (cond.AxisIndex, cond.FilterRangeMinValue, cond.FilterRangeMaxValue)
+        )
+    # besides the set of conditions, we also include the FeatureTableSubstitution
+    # version to identify unique FeatureVariationRecords, even though only one
+    # version is currently defined. It's theoretically possible that multiple
+    # records with same conditions but different substitution table version be
+    # present in the same font for backward compatibility.
+    recordKey = frozenset([rec.FeatureTableSubstitution.Version] + conditionSet)
+    if recordKey in seen:
+        return False
+    else:
+        seen.add(recordKey)  # side effect
+        return True
+
+
+def _limitFeatureVariationConditionRange(condition, axisLimit):
+    minValue = condition.FilterRangeMinValue
+    maxValue = condition.FilterRangeMaxValue
+
+    if (
+        minValue > maxValue
+        or minValue > axisLimit.maximum
+        or maxValue < axisLimit.minimum
+    ):
+        # condition invalid or out of range
+        return
+
+    return tuple(
+        axisLimit.renormalizeValue(v, extrapolate=False) for v in (minValue, maxValue)
+    )
+
+
+def _instantiateFeatureVariationRecord(
+    record, recIdx, axisLimits, fvarAxes, axisIndexMap
+):
+    applies = True
+    shouldKeep = False
+    newConditions = []
+    from fontTools.varLib.instancer import NormalizedAxisTripleAndDistances
+
+    default_triple = NormalizedAxisTripleAndDistances(-1, 0, +1)
+    if record.ConditionSet is None:
+        record.ConditionSet = ot.ConditionSet()
+        record.ConditionSet.ConditionTable = []
+        record.ConditionSet.ConditionCount = 0
+    for i, condition in enumerate(record.ConditionSet.ConditionTable):
+        if condition.Format == 1:
+            axisIdx = condition.AxisIndex
+            axisTag = fvarAxes[axisIdx].axisTag
+
+            minValue = condition.FilterRangeMinValue
+            maxValue = condition.FilterRangeMaxValue
+            triple = axisLimits.get(axisTag, default_triple)
+
+            if not (minValue <= triple.default <= maxValue):
+                applies = False
+
+            # if condition not met, remove entire record
+            if triple.minimum > maxValue or triple.maximum < minValue:
+                newConditions = None
+                break
+
+            if axisTag in axisIndexMap:
+                # remap axis index
+                condition.AxisIndex = axisIndexMap[axisTag]
+
+                # remap condition limits
+                newRange = _limitFeatureVariationConditionRange(condition, triple)
+                if newRange:
+                    # keep condition with updated limits
+                    minimum, maximum = newRange
+                    condition.FilterRangeMinValue = minimum
+                    condition.FilterRangeMaxValue = maximum
+                    shouldKeep = True
+                    if minimum != -1 or maximum != +1:
+                        newConditions.append(condition)
+                else:
+                    # condition out of range, remove entire record
+                    newConditions = None
+                    break
+
+        else:
+            log.warning(
+                "Condition table {0} of FeatureVariationRecord {1} has "
+                "unsupported format ({2}); ignored".format(i, recIdx, condition.Format)
+            )
+            applies = False
+            newConditions.append(condition)
+
+    if newConditions is not None and shouldKeep:
+        record.ConditionSet.ConditionTable = newConditions
+        if not newConditions:
+            record.ConditionSet = None
+        shouldKeep = True
+    else:
+        shouldKeep = False
+
+    # Does this *always* apply?
+    universal = shouldKeep and not newConditions
+
+    return applies, shouldKeep, universal
+
+
+def _instantiateFeatureVariations(table, fvarAxes, axisLimits):
+    pinnedAxes = set(axisLimits.pinnedLocation())
+    axisOrder = [axis.axisTag for axis in fvarAxes if axis.axisTag not in pinnedAxes]
+    axisIndexMap = {axisTag: axisOrder.index(axisTag) for axisTag in axisOrder}
+
+    featureVariationApplied = False
+    uniqueRecords = set()
+    newRecords = []
+    defaultsSubsts = None
+
+    for i, record in enumerate(table.FeatureVariations.FeatureVariationRecord):
+        applies, shouldKeep, universal = _instantiateFeatureVariationRecord(
+            record, i, axisLimits, fvarAxes, axisIndexMap
+        )
+
+        if shouldKeep and _featureVariationRecordIsUnique(record, uniqueRecords):
+            newRecords.append(record)
+
+        if applies and not featureVariationApplied:
+            assert record.FeatureTableSubstitution.Version == 0x00010000
+            defaultsSubsts = deepcopy(record.FeatureTableSubstitution)
+            for default, rec in zip(
+                defaultsSubsts.SubstitutionRecord,
+                record.FeatureTableSubstitution.SubstitutionRecord,
+            ):
+                default.Feature = deepcopy(
+                    table.FeatureList.FeatureRecord[rec.FeatureIndex].Feature
+                )
+                table.FeatureList.FeatureRecord[rec.FeatureIndex].Feature = deepcopy(
+                    rec.Feature
+                )
+            # Set variations only once
+            featureVariationApplied = True
+
+        # Further records don't have a chance to apply after a universal record
+        if universal:
+            break
+
+    # Insert a catch-all record to reinstate the old features if necessary
+    if featureVariationApplied and newRecords and not universal:
+        defaultRecord = ot.FeatureVariationRecord()
+        defaultRecord.ConditionSet = ot.ConditionSet()
+        defaultRecord.ConditionSet.ConditionTable = []
+        defaultRecord.ConditionSet.ConditionCount = 0
+        defaultRecord.FeatureTableSubstitution = defaultsSubsts
+
+        newRecords.append(defaultRecord)
+
+    if newRecords:
+        table.FeatureVariations.FeatureVariationRecord = newRecords
+        table.FeatureVariations.FeatureVariationCount = len(newRecords)
+    else:
+        del table.FeatureVariations
+        # downgrade table version if there are no FeatureVariations left
+        table.Version = 0x00010000
+
+
+def instantiateFeatureVariations(varfont, axisLimits):
+    for tableTag in ("GPOS", "GSUB"):
+        if tableTag not in varfont or not getattr(
+            varfont[tableTag].table, "FeatureVariations", None
+        ):
+            continue
+        log.info("Instantiating FeatureVariations of %s table", tableTag)
+        _instantiateFeatureVariations(
+            varfont[tableTag].table, varfont["fvar"].axes, axisLimits
+        )
+        # remove unreferenced lookups
+        varfont[tableTag].prune_lookups()

venv/lib/python3.12/site-packages/fontTools/varLib/instancer/names.py

@@ -0,0 +1,388 @@
+"""Helpers for instantiating name table records."""
+
+from contextlib import contextmanager
+from copy import deepcopy
+from enum import IntEnum
+import re
+
+
+class NameID(IntEnum):
+    FAMILY_NAME = 1
+    SUBFAMILY_NAME = 2
+    UNIQUE_FONT_IDENTIFIER = 3
+    FULL_FONT_NAME = 4
+    VERSION_STRING = 5
+    POSTSCRIPT_NAME = 6
+    TYPOGRAPHIC_FAMILY_NAME = 16
+    TYPOGRAPHIC_SUBFAMILY_NAME = 17
+    VARIATIONS_POSTSCRIPT_NAME_PREFIX = 25
+
+
+ELIDABLE_AXIS_VALUE_NAME = 2
+
+
+def getVariationNameIDs(varfont):
+    used = []
+    if "fvar" in varfont:
+        fvar = varfont["fvar"]
+        for axis in fvar.axes:
+            used.append(axis.axisNameID)
+        for instance in fvar.instances:
+            used.append(instance.subfamilyNameID)
+            if instance.postscriptNameID != 0xFFFF:
+                used.append(instance.postscriptNameID)
+    if "STAT" in varfont:
+        stat = varfont["STAT"].table
+        for axis in stat.DesignAxisRecord.Axis if stat.DesignAxisRecord else ():
+            used.append(axis.AxisNameID)
+        for value in stat.AxisValueArray.AxisValue if stat.AxisValueArray else ():
+            used.append(value.ValueNameID)
+        elidedFallbackNameID = getattr(stat, "ElidedFallbackNameID", None)
+        if elidedFallbackNameID is not None:
+            used.append(elidedFallbackNameID)
+    # nameIDs <= 255 are reserved by OT spec so we don't touch them
+    return {nameID for nameID in used if nameID > 255}
+
+
+@contextmanager
+def pruningUnusedNames(varfont):
+    from . import log
+
+    origNameIDs = getVariationNameIDs(varfont)
+
+    yield
+
+    log.info("Pruning name table")
+    exclude = origNameIDs - getVariationNameIDs(varfont)
+    varfont["name"].names[:] = [
+        record for record in varfont["name"].names if record.nameID not in exclude
+    ]
+    if "ltag" in varfont:
+        # Drop the whole 'ltag' table if all the language-dependent Unicode name
+        # records that reference it have been dropped.
+        # TODO: Only prune unused ltag tags, renumerating langIDs accordingly.
+        # Note ltag can also be used by feat or morx tables, so check those too.
+        if not any(
+            record
+            for record in varfont["name"].names
+            if record.platformID == 0 and record.langID != 0xFFFF
+        ):
+            del varfont["ltag"]
+
+
+def updateNameTable(varfont, axisLimits):
+    """Update instatiated variable font's name table using STAT AxisValues.
+
+    Raises ValueError if the STAT table is missing or an Axis Value table is
+    missing for requested axis locations.
+
+    First, collect all STAT AxisValues that match the new default axis locations
+    (excluding "elided" ones); concatenate the strings in design axis order,
+    while giving priority to "synthetic" values (Format 4), to form the
+    typographic subfamily name associated with the new default instance.
+    Finally, update all related records in the name table, making sure that
+    legacy family/sub-family names conform to the the R/I/B/BI (Regular, Italic,
+    Bold, Bold Italic) naming model.
+
+    Example: Updating a partial variable font:
+    | >>> ttFont = TTFont("OpenSans[wdth,wght].ttf")
+    | >>> updateNameTable(ttFont, {"wght": (400, 900), "wdth": 75})
+
+    The name table records will be updated in the following manner:
+    NameID 1 familyName: "Open Sans" --> "Open Sans Condensed"
+    NameID 2 subFamilyName: "Regular" --> "Regular"
+    NameID 3 Unique font identifier: "3.000;GOOG;OpenSans-Regular" --> \
+        "3.000;GOOG;OpenSans-Condensed"
+    NameID 4 Full font name: "Open Sans Regular" --> "Open Sans Condensed"
+    NameID 6 PostScript name: "OpenSans-Regular" --> "OpenSans-Condensed"
+    NameID 16 Typographic Family name: None --> "Open Sans"
+    NameID 17 Typographic Subfamily name: None --> "Condensed"
+
+    References:
+    https://docs.microsoft.com/en-us/typography/opentype/spec/stat
+    https://docs.microsoft.com/en-us/typography/opentype/spec/name#name-ids
+    """
+    from . import AxisLimits, axisValuesFromAxisLimits
+
+    if "STAT" not in varfont:
+        raise ValueError("Cannot update name table since there is no STAT table.")
+    stat = varfont["STAT"].table
+    if not stat.AxisValueArray:
+        raise ValueError("Cannot update name table since there are no STAT Axis Values")
+    fvar = varfont["fvar"]
+
+    # The updated name table will reflect the new 'zero origin' of the font.
+    # If we're instantiating a partial font, we will populate the unpinned
+    # axes with their default axis values from fvar.
+    axisLimits = AxisLimits(axisLimits).limitAxesAndPopulateDefaults(varfont)
+    partialDefaults = axisLimits.defaultLocation()
+    fvarDefaults = {a.axisTag: a.defaultValue for a in fvar.axes}
+    defaultAxisCoords = AxisLimits({**fvarDefaults, **partialDefaults})
+    assert all(v.minimum == v.maximum for v in defaultAxisCoords.values())
+
+    axisValueTables = axisValuesFromAxisLimits(stat, defaultAxisCoords)
+    checkAxisValuesExist(stat, axisValueTables, defaultAxisCoords.pinnedLocation())
+
+    # ignore "elidable" axis values, should be omitted in application font menus.
+    axisValueTables = [
+        v for v in axisValueTables if not v.Flags & ELIDABLE_AXIS_VALUE_NAME
+    ]
+    axisValueTables = _sortAxisValues(axisValueTables)
+    _updateNameRecords(varfont, axisValueTables)
+
+
+def checkAxisValuesExist(stat, axisValues, axisCoords):
+    seen = set()
+    designAxes = stat.DesignAxisRecord.Axis
+    hasValues = set()
+    for value in stat.AxisValueArray.AxisValue:
+        if value.Format in (1, 2, 3):
+            hasValues.add(designAxes[value.AxisIndex].AxisTag)
+        elif value.Format == 4:
+            for rec in value.AxisValueRecord:
+                hasValues.add(designAxes[rec.AxisIndex].AxisTag)
+
+    for axisValueTable in axisValues:
+        axisValueFormat = axisValueTable.Format
+        if axisValueTable.Format in (1, 2, 3):
+            axisTag = designAxes[axisValueTable.AxisIndex].AxisTag
+            if axisValueFormat == 2:
+                axisValue = axisValueTable.NominalValue
+            else:
+                axisValue = axisValueTable.Value
+            if axisTag in axisCoords and axisValue == axisCoords[axisTag]:
+                seen.add(axisTag)
+        elif axisValueTable.Format == 4:
+            for rec in axisValueTable.AxisValueRecord:
+                axisTag = designAxes[rec.AxisIndex].AxisTag
+                if axisTag in axisCoords and rec.Value == axisCoords[axisTag]:
+                    seen.add(axisTag)
+
+    missingAxes = (set(axisCoords) - seen) & hasValues
+    if missingAxes:
+        missing = ", ".join(f"'{i}': {axisCoords[i]}" for i in missingAxes)
+        raise ValueError(f"Cannot find Axis Values {{{missing}}}")
+
+
+def _sortAxisValues(axisValues):
+    # Sort by axis index, remove duplicates and ensure that format 4 AxisValues
+    # are dominant.
+    # The MS Spec states: "if a format 1, format 2 or format 3 table has a
+    # (nominal) value used in a format 4 table that also has values for
+    # other axes, the format 4 table, being the more specific match, is used",
+    # https://docs.microsoft.com/en-us/typography/opentype/spec/stat#axis-value-table-format-4
+    results = []
+    seenAxes = set()
+    # Sort format 4 axes so the tables with the most AxisValueRecords are first
+    format4 = sorted(
+        [v for v in axisValues if v.Format == 4],
+        key=lambda v: len(v.AxisValueRecord),
+        reverse=True,
+    )
+
+    for val in format4:
+        axisIndexes = set(r.AxisIndex for r in val.AxisValueRecord)
+        minIndex = min(axisIndexes)
+        if not seenAxes & axisIndexes:
+            seenAxes |= axisIndexes
+            results.append((minIndex, val))
+
+    for val in axisValues:
+        if val in format4:
+            continue
+        axisIndex = val.AxisIndex
+        if axisIndex not in seenAxes:
+            seenAxes.add(axisIndex)
+            results.append((axisIndex, val))
+
+    return [axisValue for _, axisValue in sorted(results)]
+
+
+def _updateNameRecords(varfont, axisValues):
+    # Update nametable based on the axisValues using the R/I/B/BI model.
+    nametable = varfont["name"]
+    stat = varfont["STAT"].table
+
+    axisValueNameIDs = [a.ValueNameID for a in axisValues]
+    ribbiNameIDs = [n for n in axisValueNameIDs if _isRibbi(nametable, n)]
+    nonRibbiNameIDs = [n for n in axisValueNameIDs if n not in ribbiNameIDs]
+    elidedNameID = stat.ElidedFallbackNameID
+    elidedNameIsRibbi = _isRibbi(nametable, elidedNameID)
+
+    getName = nametable.getName
+    platforms = set((r.platformID, r.platEncID, r.langID) for r in nametable.names)
+    for platform in platforms:
+        if not all(getName(i, *platform) for i in (1, 2, elidedNameID)):
+            # Since no family name and subfamily name records were found,
+            # we cannot update this set of name Records.
+            continue
+
+        subFamilyName = " ".join(
+            getName(n, *platform).toUnicode() for n in ribbiNameIDs
+        )
+        if nonRibbiNameIDs:
+            typoSubFamilyName = " ".join(
+                getName(n, *platform).toUnicode() for n in axisValueNameIDs
+            )
+        else:
+            typoSubFamilyName = None
+
+        # If neither subFamilyName and typographic SubFamilyName exist,
+        # we will use the STAT's elidedFallbackName
+        if not typoSubFamilyName and not subFamilyName:
+            if elidedNameIsRibbi:
+                subFamilyName = getName(elidedNameID, *platform).toUnicode()
+            else:
+                typoSubFamilyName = getName(elidedNameID, *platform).toUnicode()
+
+        familyNameSuffix = " ".join(
+            getName(n, *platform).toUnicode() for n in nonRibbiNameIDs
+        )
+
+        _updateNameTableStyleRecords(
+            varfont,
+            familyNameSuffix,
+            subFamilyName,
+            typoSubFamilyName,
+            *platform,
+        )
+
+
+def _isRibbi(nametable, nameID):
+    englishRecord = nametable.getName(nameID, 3, 1, 0x409)
+    return (
+        True
+        if englishRecord is not None
+        and englishRecord.toUnicode() in ("Regular", "Italic", "Bold", "Bold Italic")
+        else False
+    )
+
+
+def _updateNameTableStyleRecords(
+    varfont,
+    familyNameSuffix,
+    subFamilyName,
+    typoSubFamilyName,
+    platformID=3,
+    platEncID=1,
+    langID=0x409,
+):
+    # TODO (Marc F) It may be nice to make this part a standalone
+    # font renamer in the future.
+    nametable = varfont["name"]
+    platform = (platformID, platEncID, langID)
+
+    currentFamilyName = nametable.getName(
+        NameID.TYPOGRAPHIC_FAMILY_NAME, *platform
+    ) or nametable.getName(NameID.FAMILY_NAME, *platform)
+
+    currentStyleName = nametable.getName(
+        NameID.TYPOGRAPHIC_SUBFAMILY_NAME, *platform
+    ) or nametable.getName(NameID.SUBFAMILY_NAME, *platform)
+
+    if not all([currentFamilyName, currentStyleName]):
+        raise ValueError(f"Missing required NameIDs 1 and 2 for platform {platform}")
+
+    currentFamilyName = currentFamilyName.toUnicode()
+    currentStyleName = currentStyleName.toUnicode()
+
+    nameIDs = {
+        NameID.FAMILY_NAME: currentFamilyName,
+        NameID.SUBFAMILY_NAME: subFamilyName or "Regular",
+    }
+    if typoSubFamilyName:
+        nameIDs[NameID.FAMILY_NAME] = f"{currentFamilyName} {familyNameSuffix}".strip()
+        nameIDs[NameID.TYPOGRAPHIC_FAMILY_NAME] = currentFamilyName
+        nameIDs[NameID.TYPOGRAPHIC_SUBFAMILY_NAME] = typoSubFamilyName
+    else:
+        # Remove previous Typographic Family and SubFamily names since they're
+        # no longer required
+        for nameID in (
+            NameID.TYPOGRAPHIC_FAMILY_NAME,
+            NameID.TYPOGRAPHIC_SUBFAMILY_NAME,
+        ):
+            nametable.removeNames(nameID=nameID)
+
+    newFamilyName = (
+        nameIDs.get(NameID.TYPOGRAPHIC_FAMILY_NAME) or nameIDs[NameID.FAMILY_NAME]
+    )
+    newStyleName = (
+        nameIDs.get(NameID.TYPOGRAPHIC_SUBFAMILY_NAME) or nameIDs[NameID.SUBFAMILY_NAME]
+    )
+
+    nameIDs[NameID.FULL_FONT_NAME] = f"{newFamilyName} {newStyleName}"
+    nameIDs[NameID.POSTSCRIPT_NAME] = _updatePSNameRecord(
+        varfont, newFamilyName, newStyleName, platform
+    )
+
+    uniqueID = _updateUniqueIdNameRecord(varfont, nameIDs, platform)
+    if uniqueID:
+        nameIDs[NameID.UNIQUE_FONT_IDENTIFIER] = uniqueID
+
+    for nameID, string in nameIDs.items():
+        assert string, nameID
+        nametable.setName(string, nameID, *platform)
+
+    if "fvar" not in varfont:
+        nametable.removeNames(NameID.VARIATIONS_POSTSCRIPT_NAME_PREFIX)
+
+
+def _updatePSNameRecord(varfont, familyName, styleName, platform):
+    # Implementation based on Adobe Technical Note #5902 :
+    # https://wwwimages2.adobe.com/content/dam/acom/en/devnet/font/pdfs/5902.AdobePSNameGeneration.pdf
+    nametable = varfont["name"]
+
+    family_prefix = nametable.getName(
+        NameID.VARIATIONS_POSTSCRIPT_NAME_PREFIX, *platform
+    )
+    if family_prefix:
+        family_prefix = family_prefix.toUnicode()
+    else:
+        family_prefix = familyName
+
+    psName = f"{family_prefix}-{styleName}"
+    # Remove any characters other than uppercase Latin letters, lowercase
+    # Latin letters, digits and hyphens.
+    psName = re.sub(r"[^A-Za-z0-9-]", r"", psName)
+
+    if len(psName) > 127:
+        # Abbreviating the stylename so it fits within 127 characters whilst
+        # conforming to every vendor's specification is too complex. Instead
+        # we simply truncate the psname and add the required "..."
+        return f"{psName[:124]}..."
+    return psName
+
+
+def _updateUniqueIdNameRecord(varfont, nameIDs, platform):
+    nametable = varfont["name"]
+    currentRecord = nametable.getName(NameID.UNIQUE_FONT_IDENTIFIER, *platform)
+    if not currentRecord:
+        return None
+
+    # Check if full name and postscript name are a substring of currentRecord
+    for nameID in (NameID.FULL_FONT_NAME, NameID.POSTSCRIPT_NAME):
+        nameRecord = nametable.getName(nameID, *platform)
+        if not nameRecord:
+            continue
+        if nameRecord.toUnicode() in currentRecord.toUnicode():
+            return currentRecord.toUnicode().replace(
+                nameRecord.toUnicode(), nameIDs[nameRecord.nameID]
+            )
+
+    # Create a new string since we couldn't find any substrings.
+    fontVersion = _fontVersion(varfont, platform)
+    achVendID = varfont["OS/2"].achVendID
+    # Remove non-ASCII characers and trailing spaces
+    vendor = re.sub(r"[^\x00-\x7F]", "", achVendID).strip()
+    psName = nameIDs[NameID.POSTSCRIPT_NAME]
+    return f"{fontVersion};{vendor};{psName}"
+
+
+def _fontVersion(font, platform=(3, 1, 0x409)):
+    nameRecord = font["name"].getName(NameID.VERSION_STRING, *platform)
+    if nameRecord is None:
+        return f'{font["head"].fontRevision:.3f}'
+    # "Version 1.101; ttfautohint (v1.8.1.43-b0c9)" --> "1.101"
+    # Also works fine with inputs "Version 1.101" or "1.101" etc
+    versionNumber = nameRecord.toUnicode().split(";")[0]
+    return versionNumber.lstrip("Version ").strip()

venv/lib/python3.12/site-packages/fontTools/varLib/instancer/solver.py

@@ -0,0 +1,309 @@
+from fontTools.varLib.models import supportScalar
+from fontTools.misc.fixedTools import MAX_F2DOT14
+from functools import lru_cache
+
+__all__ = ["rebaseTent"]
+
+EPSILON = 1 / (1 << 14)
+
+
+def _reverse_negate(v):
+    return (-v[2], -v[1], -v[0])
+
+
+def _solve(tent, axisLimit, negative=False):
+    axisMin, axisDef, axisMax, _distanceNegative, _distancePositive = axisLimit
+    lower, peak, upper = tent
+
+    # Mirror the problem such that axisDef <= peak
+    if axisDef > peak:
+        return [
+            (scalar, _reverse_negate(t) if t is not None else None)
+            for scalar, t in _solve(
+                _reverse_negate(tent),
+                axisLimit.reverse_negate(),
+                not negative,
+            )
+        ]
+    # axisDef <= peak
+
+    # case 1: The whole deltaset falls outside the new limit; we can drop it
+    #
+    #                                          peak
+    #  1.........................................o..........
+    #                                           / \
+    #                                          /   \
+    #                                         /     \
+    #                                        /       \
+    #  0---|-----------|----------|-------- o         o----1
+    #    axisMin     axisDef    axisMax   lower     upper
+    #
+    if axisMax <= lower and axisMax < peak:
+        return []  # No overlap
+
+    # case 2: Only the peak and outermost bound fall outside the new limit;
+    # we keep the deltaset, update peak and outermost bound and and scale deltas
+    # by the scalar value for the restricted axis at the new limit, and solve
+    # recursively.
+    #
+    #                                  |peak
+    #  1...............................|.o..........
+    #                                  |/ \
+    #                                  /   \
+    #                                 /|    \
+    #                                / |     \
+    #  0--------------------------- o  |      o----1
+    #                           lower  |      upper
+    #                                  |
+    #                                axisMax
+    #
+    # Convert to:
+    #
+    #  1............................................
+    #                                  |
+    #                                  o peak
+    #                                 /|
+    #                                /x|
+    #  0--------------------------- o  o upper ----1
+    #                           lower  |
+    #                                  |
+    #                                axisMax
+    if axisMax < peak:
+        mult = supportScalar({"tag": axisMax}, {"tag": tent})
+        tent = (lower, axisMax, axisMax)
+        return [(scalar * mult, t) for scalar, t in _solve(tent, axisLimit)]
+
+    # lower <= axisDef <= peak <= axisMax
+
+    gain = supportScalar({"tag": axisDef}, {"tag": tent})
+    out = [(gain, None)]
+
+    # First, the positive side
+
+    # outGain is the scalar of axisMax at the tent.
+    outGain = supportScalar({"tag": axisMax}, {"tag": tent})
+
+    # Case 3a: Gain is more than outGain. The tent down-slope crosses
+    # the axis into negative. We have to split it into multiples.
+    #
+    #                      | peak  |
+    #  1...................|.o.....|..............
+    #                      |/x\_   |
+    #  gain................+....+_.|..............
+    #                     /|    |y\|
+    #  ................../.|....|..+_......outGain
+    #                   /  |    |  | \
+    #  0---|-----------o   |    |  |  o----------1
+    #    axisMin    lower  |    |  |   upper
+    #                      |    |  |
+    #                axisDef    |  axisMax
+    #                           |
+    #                      crossing
+    if gain >= outGain:
+        # Note that this is the branch taken if both gain and outGain are 0.
+
+        # Crossing point on the axis.
+        crossing = peak + (1 - gain) * (upper - peak)
+
+        loc = (max(lower, axisDef), peak, crossing)
+        scalar = 1
+
+        # The part before the crossing point.
+        out.append((scalar - gain, loc))
+
+        # The part after the crossing point may use one or two tents,
+        # depending on whether upper is before axisMax or not, in one
+        # case we need to keep it down to eternity.
+
+        # Case 3a1, similar to case 1neg; just one tent needed, as in
+        # the drawing above.
+        if upper >= axisMax:
+            loc = (crossing, axisMax, axisMax)
+            scalar = outGain
+
+            out.append((scalar - gain, loc))
+
+        # Case 3a2: Similar to case 2neg; two tents needed, to keep
+        # down to eternity.
+        #
+        #                      | peak             |
+        #  1...................|.o................|...
+        #                      |/ \_              |
+        #  gain................+....+_............|...
+        #                     /|    | \xxxxxxxxxxy|
+        #                    / |    |  \_xxxxxyyyy|
+        #                   /  |    |    \xxyyyyyy|
+        #  0---|-----------o   |    |     o-------|--1
+        #    axisMin    lower  |    |      upper  |
+        #                      |    |             |
+        #                axisDef    |             axisMax
+        #                           |
+        #                      crossing
+        else:
+            # A tent's peak cannot fall on axis default. Nudge it.
+            if upper == axisDef:
+                upper += EPSILON
+
+            # Downslope.
+            loc1 = (crossing, upper, axisMax)
+            scalar1 = 0
+
+            # Eternity justify.
+            loc2 = (upper, axisMax, axisMax)
+            scalar2 = 0
+
+            out.append((scalar1 - gain, loc1))
+            out.append((scalar2 - gain, loc2))
+
+    else:
+        # Special-case if peak is at axisMax.
+        if axisMax == peak:
+            upper = peak
+
+        # Case 3:
+        # We keep delta as is and only scale the axis upper to achieve
+        # the desired new tent if feasible.
+        #
+        #                        peak
+        #  1.....................o....................
+        #                       / \_|
+        #  ..................../....+_.........outGain
+        #                     /     | \
+        #  gain..............+......|..+_.............
+        #                   /|      |  | \
+        #  0---|-----------o |      |  |  o----------1
+        #    axisMin    lower|      |  |   upper
+        #                    |      |  newUpper
+        #              axisDef      axisMax
+        #
+        newUpper = peak + (1 - gain) * (upper - peak)
+        assert axisMax <= newUpper  # Because outGain > gain
+        # Disabled because ots doesn't like us:
+        # https://github.com/fonttools/fonttools/issues/3350
+        if False and newUpper <= axisDef + (axisMax - axisDef) * 2:
+            upper = newUpper
+            if not negative and axisDef + (axisMax - axisDef) * MAX_F2DOT14 < upper:
+                # we clamp +2.0 to the max F2Dot14 (~1.99994) for convenience
+                upper = axisDef + (axisMax - axisDef) * MAX_F2DOT14
+                assert peak < upper
+
+            loc = (max(axisDef, lower), peak, upper)
+            scalar = 1
+
+            out.append((scalar - gain, loc))
+
+        # Case 4: New limit doesn't fit; we need to chop into two tents,
+        # because the shape of a triangle with part of one side cut off
+        # cannot be represented as a triangle itself.
+        #
+        #            |   peak |
+        #  1.........|......o.|....................
+        #  ..........|...../x\|.............outGain
+        #            |    |xxy|\_
+        #            |   /xxxy|  \_
+        #            |  |xxxxy|    \_
+        #            |  /xxxxy|      \_
+        #  0---|-----|-oxxxxxx|        o----------1
+        #    axisMin | lower  |        upper
+        #            |        |
+        #          axisDef  axisMax
+        #
+        else:
+            loc1 = (max(axisDef, lower), peak, axisMax)
+            scalar1 = 1
+
+            loc2 = (peak, axisMax, axisMax)
+            scalar2 = outGain
+
+            out.append((scalar1 - gain, loc1))
+            # Don't add a dirac delta!
+            if peak < axisMax:
+                out.append((scalar2 - gain, loc2))
+
+    # Now, the negative side
+
+    # Case 1neg: Lower extends beyond axisMin: we chop. Simple.
+    #
+    #                     |   |peak
+    #  1..................|...|.o.................
+    #                     |   |/ \
+    #  gain...............|...+...\...............
+    #                     |x_/|    \
+    #                     |/  |     \
+    #                   _/|   |      \
+    #  0---------------o  |   |       o----------1
+    #              lower  |   |       upper
+    #                     |   |
+    #               axisMin   axisDef
+    #
+    if lower <= axisMin:
+        loc = (axisMin, axisMin, axisDef)
+        scalar = supportScalar({"tag": axisMin}, {"tag": tent})
+
+        out.append((scalar - gain, loc))
+
+    # Case 2neg: Lower is betwen axisMin and axisDef: we add two
+    # tents to keep it down all the way to eternity.
+    #
+    #      |               |peak
+    #  1...|...............|.o.................
+    #      |               |/ \
+    #  gain|...............+...\...............
+    #      |yxxxxxxxxxxxxx/|    \
+    #      |yyyyyyxxxxxxx/ |     \
+    #      |yyyyyyyyyyyx/  |      \
+    #  0---|-----------o   |       o----------1
+    #    axisMin    lower  |       upper
+    #                      |
+    #                    axisDef
+    #
+    else:
+        # A tent's peak cannot fall on axis default. Nudge it.
+        if lower == axisDef:
+            lower -= EPSILON
+
+        # Downslope.
+        loc1 = (axisMin, lower, axisDef)
+        scalar1 = 0
+
+        # Eternity justify.
+        loc2 = (axisMin, axisMin, lower)
+        scalar2 = 0
+
+        out.append((scalar1 - gain, loc1))
+        out.append((scalar2 - gain, loc2))
+
+    return out
+
+
+@lru_cache(128)
+def rebaseTent(tent, axisLimit):
+    """Given a tuple (lower,peak,upper) "tent" and new axis limits
+    (axisMin,axisDefault,axisMax), solves how to represent the tent
+    under the new axis configuration.  All values are in normalized
+    -1,0,+1 coordinate system. Tent values can be outside this range.
+
+    Return value is a list of tuples. Each tuple is of the form
+    (scalar,tent), where scalar is a multipler to multiply any
+    delta-sets by, and tent is a new tent for that output delta-set.
+    If tent value is None, that is a special deltaset that should
+    be always-enabled (called "gain")."""
+
+    axisMin, axisDef, axisMax, _distanceNegative, _distancePositive = axisLimit
+    assert -1 <= axisMin <= axisDef <= axisMax <= +1
+
+    lower, peak, upper = tent
+    assert -2 <= lower <= peak <= upper <= +2
+
+    assert peak != 0
+
+    sols = _solve(tent, axisLimit)
+
+    n = lambda v: axisLimit.renormalizeValue(v)
+    sols = [
+        (scalar, (n(v[0]), n(v[1]), n(v[2])) if v is not None else None)
+        for scalar, v in sols
+        if scalar
+    ]
+
+    return sols

venv/lib/python3.12/site-packages/fontTools/varLib/interpolatableHelpers.py

@@ -0,0 +1,396 @@
+from fontTools.ttLib.ttGlyphSet import LerpGlyphSet
+from fontTools.pens.basePen import AbstractPen, BasePen, DecomposingPen
+from fontTools.pens.pointPen import AbstractPointPen, SegmentToPointPen
+from fontTools.pens.recordingPen import RecordingPen, DecomposingRecordingPen
+from fontTools.misc.transform import Transform
+from collections import defaultdict, deque
+from math import sqrt, copysign, atan2, pi
+from enum import Enum
+import itertools
+
+import logging
+
+log = logging.getLogger("fontTools.varLib.interpolatable")
+
+
+class InterpolatableProblem:
+    NOTHING = "nothing"
+    MISSING = "missing"
+    OPEN_PATH = "open_path"
+    PATH_COUNT = "path_count"
+    NODE_COUNT = "node_count"
+    NODE_INCOMPATIBILITY = "node_incompatibility"
+    CONTOUR_ORDER = "contour_order"
+    WRONG_START_POINT = "wrong_start_point"
+    KINK = "kink"
+    UNDERWEIGHT = "underweight"
+    OVERWEIGHT = "overweight"
+
+    severity = {
+        MISSING: 1,
+        OPEN_PATH: 2,
+        PATH_COUNT: 3,
+        NODE_COUNT: 4,
+        NODE_INCOMPATIBILITY: 5,
+        CONTOUR_ORDER: 6,
+        WRONG_START_POINT: 7,
+        KINK: 8,
+        UNDERWEIGHT: 9,
+        OVERWEIGHT: 10,
+        NOTHING: 11,
+    }
+
+
+def sort_problems(problems):
+    """Sort problems by severity, then by glyph name, then by problem message."""
+    return dict(
+        sorted(
+            problems.items(),
+            key=lambda _: -min(
+                (
+                    (InterpolatableProblem.severity[p["type"]] + p.get("tolerance", 0))
+                    for p in _[1]
+                ),
+            ),
+            reverse=True,
+        )
+    )
+
+
+def rot_list(l, k):
+    """Rotate list by k items forward.  Ie. item at position 0 will be
+    at position k in returned list.  Negative k is allowed."""
+    return l[-k:] + l[:-k]
+
+
+class PerContourPen(BasePen):
+    def __init__(self, Pen, glyphset=None):
+        BasePen.__init__(self, glyphset)
+        self._glyphset = glyphset
+        self._Pen = Pen
+        self._pen = None
+        self.value = []
+
+    def _moveTo(self, p0):
+        self._newItem()
+        self._pen.moveTo(p0)
+
+    def _lineTo(self, p1):
+        self._pen.lineTo(p1)
+
+    def _qCurveToOne(self, p1, p2):
+        self._pen.qCurveTo(p1, p2)
+
+    def _curveToOne(self, p1, p2, p3):
+        self._pen.curveTo(p1, p2, p3)
+
+    def _closePath(self):
+        self._pen.closePath()
+        self._pen = None
+
+    def _endPath(self):
+        self._pen.endPath()
+        self._pen = None
+
+    def _newItem(self):
+        self._pen = pen = self._Pen()
+        self.value.append(pen)
+
+
+class PerContourOrComponentPen(PerContourPen):
+    def addComponent(self, glyphName, transformation):
+        self._newItem()
+        self.value[-1].addComponent(glyphName, transformation)
+
+
+class SimpleRecordingPointPen(AbstractPointPen):
+    def __init__(self):
+        self.value = []
+
+    def beginPath(self, identifier=None, **kwargs):
+        pass
+
+    def endPath(self) -> None:
+        pass
+
+    def addPoint(self, pt, segmentType=None):
+        self.value.append((pt, False if segmentType is None else True))
+
+
+def vdiff_hypot2(v0, v1):
+    s = 0
+    for x0, x1 in zip(v0, v1):
+        d = x1 - x0
+        s += d * d
+    return s
+
+
+def vdiff_hypot2_complex(v0, v1):
+    s = 0
+    for x0, x1 in zip(v0, v1):
+        d = x1 - x0
+        s += d.real * d.real + d.imag * d.imag
+        # This does the same but seems to be slower:
+        # s += (d * d.conjugate()).real
+    return s
+
+
+def matching_cost(G, matching):
+    return sum(G[i][j] for i, j in enumerate(matching))
+
+
+def min_cost_perfect_bipartite_matching_scipy(G):
+    n = len(G)
+    rows, cols = linear_sum_assignment(G)
+    assert (rows == list(range(n))).all()
+    # Convert numpy array and integer to Python types,
+    # to ensure that this is JSON-serializable.
+    cols = list(int(e) for e in cols)
+    return list(cols), matching_cost(G, cols)
+
+
+def min_cost_perfect_bipartite_matching_munkres(G):
+    n = len(G)
+    cols = [None] * n
+    for row, col in Munkres().compute(G):
+        cols[row] = col
+    return cols, matching_cost(G, cols)
+
+
+def min_cost_perfect_bipartite_matching_bruteforce(G):
+    n = len(G)
+
+    if n > 6:
+        raise Exception("Install Python module 'munkres' or 'scipy >= 0.17.0'")
+
+    # Otherwise just brute-force
+    permutations = itertools.permutations(range(n))
+    best = list(next(permutations))
+    best_cost = matching_cost(G, best)
+    for p in permutations:
+        cost = matching_cost(G, p)
+        if cost < best_cost:
+            best, best_cost = list(p), cost
+    return best, best_cost
+
+
+try:
+    from scipy.optimize import linear_sum_assignment
+
+    min_cost_perfect_bipartite_matching = min_cost_perfect_bipartite_matching_scipy
+except ImportError:
+    try:
+        from munkres import Munkres
+
+        min_cost_perfect_bipartite_matching = (
+            min_cost_perfect_bipartite_matching_munkres
+        )
+    except ImportError:
+        min_cost_perfect_bipartite_matching = (
+            min_cost_perfect_bipartite_matching_bruteforce
+        )
+
+
+def contour_vector_from_stats(stats):
+    # Don't change the order of items here.
+    # It's okay to add to the end, but otherwise, other
+    # code depends on it. Search for "covariance".
+    size = sqrt(abs(stats.area))
+    return (
+        copysign((size), stats.area),
+        stats.meanX,
+        stats.meanY,
+        stats.stddevX * 2,
+        stats.stddevY * 2,
+        stats.correlation * size,
+    )
+
+
+def matching_for_vectors(m0, m1):
+    n = len(m0)
+
+    identity_matching = list(range(n))
+
+    costs = [[vdiff_hypot2(v0, v1) for v1 in m1] for v0 in m0]
+    (
+        matching,
+        matching_cost,
+    ) = min_cost_perfect_bipartite_matching(costs)
+    identity_cost = sum(costs[i][i] for i in range(n))
+    return matching, matching_cost, identity_cost
+
+
+def points_characteristic_bits(points):
+    bits = 0
+    for pt, b in reversed(points):
+        bits = (bits << 1) | b
+    return bits
+
+
+_NUM_ITEMS_PER_POINTS_COMPLEX_VECTOR = 4
+
+
+def points_complex_vector(points):
+    vector = []
+    if not points:
+        return vector
+    points = [complex(*pt) for pt, _ in points]
+    n = len(points)
+    assert _NUM_ITEMS_PER_POINTS_COMPLEX_VECTOR == 4
+    points.extend(points[: _NUM_ITEMS_PER_POINTS_COMPLEX_VECTOR - 1])
+    while len(points) < _NUM_ITEMS_PER_POINTS_COMPLEX_VECTOR:
+        points.extend(points[: _NUM_ITEMS_PER_POINTS_COMPLEX_VECTOR - 1])
+    for i in range(n):
+        # The weights are magic numbers.
+
+        # The point itself
+        p0 = points[i]
+        vector.append(p0)
+
+        # The vector to the next point
+        p1 = points[i + 1]
+        d0 = p1 - p0
+        vector.append(d0 * 3)
+
+        # The turn vector
+        p2 = points[i + 2]
+        d1 = p2 - p1
+        vector.append(d1 - d0)
+
+        # The angle to the next point, as a cross product;
+        # Square root of, to match dimentionality of distance.
+        cross = d0.real * d1.imag - d0.imag * d1.real
+        cross = copysign(sqrt(abs(cross)), cross)
+        vector.append(cross * 4)
+
+    return vector
+
+
+def add_isomorphisms(points, isomorphisms, reverse):
+    reference_bits = points_characteristic_bits(points)
+    n = len(points)
+
+    # if points[0][0] == points[-1][0]:
+    #   abort
+
+    if reverse:
+        points = points[::-1]
+        bits = points_characteristic_bits(points)
+    else:
+        bits = reference_bits
+
+    vector = points_complex_vector(points)
+
+    assert len(vector) % n == 0
+    mult = len(vector) // n
+    mask = (1 << n) - 1
+
+    for i in range(n):
+        b = ((bits << (n - i)) & mask) | (bits >> i)
+        if b == reference_bits:
+            isomorphisms.append(
+                (rot_list(vector, -i * mult), n - 1 - i if reverse else i, reverse)
+            )
+
+
+def find_parents_and_order(glyphsets, locations, *, discrete_axes=set()):
+    parents = [None] + list(range(len(glyphsets) - 1))
+    order = list(range(len(glyphsets)))
+    if locations:
+        # Order base master first
+        bases = [
+            i
+            for i, l in enumerate(locations)
+            if all(v == 0 for k, v in l.items() if k not in discrete_axes)
+        ]
+        if bases:
+            logging.info("Found %s base masters: %s", len(bases), bases)
+        else:
+            logging.warning("No base master location found")
+
+        # Form a minimum spanning tree of the locations
+        try:
+            from scipy.sparse.csgraph import minimum_spanning_tree
+
+            graph = [[0] * len(locations) for _ in range(len(locations))]
+            axes = set()
+            for l in locations:
+                axes.update(l.keys())
+            axes = sorted(axes)
+            vectors = [tuple(l.get(k, 0) for k in axes) for l in locations]
+            for i, j in itertools.combinations(range(len(locations)), 2):
+                i_discrete_location = {
+                    k: v for k, v in zip(axes, vectors[i]) if k in discrete_axes
+                }
+                j_discrete_location = {
+                    k: v for k, v in zip(axes, vectors[j]) if k in discrete_axes
+                }
+                if i_discrete_location != j_discrete_location:
+                    continue
+                graph[i][j] = vdiff_hypot2(vectors[i], vectors[j])
+
+            tree = minimum_spanning_tree(graph, overwrite=True)
+            rows, cols = tree.nonzero()
+            graph = defaultdict(set)
+            for row, col in zip(rows, cols):
+                graph[row].add(col)
+                graph[col].add(row)
+
+            # Traverse graph from the base and assign parents
+            parents = [None] * len(locations)
+            order = []
+            visited = set()
+            queue = deque(bases)
+            while queue:
+                i = queue.popleft()
+                visited.add(i)
+                order.append(i)
+                for j in sorted(graph[i]):
+                    if j not in visited:
+                        parents[j] = i
+                        queue.append(j)
+            assert len(order) == len(
+                parents
+            ), "Not all masters are reachable; report an issue"
+
+        except ImportError:
+            pass
+
+        log.info("Parents: %s", parents)
+        log.info("Order: %s", order)
+    return parents, order
+
+
+def transform_from_stats(stats, inverse=False):
+    # https://cookierobotics.com/007/
+    a = stats.varianceX
+    b = stats.covariance
+    c = stats.varianceY
+
+    delta = (((a - c) * 0.5) ** 2 + b * b) ** 0.5
+    lambda1 = (a + c) * 0.5 + delta  # Major eigenvalue
+    lambda2 = (a + c) * 0.5 - delta  # Minor eigenvalue
+    theta = atan2(lambda1 - a, b) if b != 0 else (pi * 0.5 if a < c else 0)
+    trans = Transform()
+
+    if lambda2 < 0:
+        # XXX This is a hack.
+        # The problem is that the covariance matrix is singular.
+        # This happens when the contour is a line, or a circle.
+        # In that case, the covariance matrix is not a good
+        # representation of the contour.
+        # We should probably detect this earlier and avoid
+        # computing the covariance matrix in the first place.
+        # But for now, we just avoid the division by zero.
+        lambda2 = 0
+
+    if inverse:
+        trans = trans.translate(-stats.meanX, -stats.meanY)
+        trans = trans.rotate(-theta)
+        trans = trans.scale(1 / sqrt(lambda1), 1 / sqrt(lambda2))
+    else:
+        trans = trans.scale(sqrt(lambda1), sqrt(lambda2))
+        trans = trans.rotate(theta)
+        trans = trans.translate(stats.meanX, stats.meanY)
+
+    return trans

venv/lib/python3.12/site-packages/fontTools/varLib/interpolatableTestContourOrder.py

@@ -0,0 +1,82 @@
+from .interpolatableHelpers import *
+import logging
+
+log = logging.getLogger("fontTools.varLib.interpolatable")
+
+
+def test_contour_order(glyph0, glyph1):
+    # We try matching both the StatisticsControlPen vector
+    # and the StatisticsPen vector.
+    #
+    # If either method found a identity matching, accept it.
+    # This is crucial for fonts like Kablammo[MORF].ttf and
+    # Nabla[EDPT,EHLT].ttf, since they really confuse the
+    # StatisticsPen vector because of their area=0 contours.
+
+    n = len(glyph0.controlVectors)
+    matching = None
+    matching_cost = 0
+    identity_cost = 0
+    done = n <= 1
+    if not done:
+        m0Control = glyph0.controlVectors
+        m1Control = glyph1.controlVectors
+        (
+            matching_control,
+            matching_cost_control,
+            identity_cost_control,
+        ) = matching_for_vectors(m0Control, m1Control)
+        done = matching_cost_control == identity_cost_control
+    if not done:
+        m0Green = glyph0.greenVectors
+        m1Green = glyph1.greenVectors
+        (
+            matching_green,
+            matching_cost_green,
+            identity_cost_green,
+        ) = matching_for_vectors(m0Green, m1Green)
+        done = matching_cost_green == identity_cost_green
+
+    if not done:
+        # See if reversing contours in one master helps.
+        # That's a common problem.  Then the wrong_start_point
+        # test will fix them.
+        #
+        # Reverse the sign of the area (0); the rest stay the same.
+        if not done:
+            m1ControlReversed = [(-m[0],) + m[1:] for m in m1Control]
+            (
+                matching_control_reversed,
+                matching_cost_control_reversed,
+                identity_cost_control_reversed,
+            ) = matching_for_vectors(m0Control, m1ControlReversed)
+            done = matching_cost_control_reversed == identity_cost_control_reversed
+        if not done:
+            m1GreenReversed = [(-m[0],) + m[1:] for m in m1Green]
+            (
+                matching_control_reversed,
+                matching_cost_green_reversed,
+                identity_cost_green_reversed,
+            ) = matching_for_vectors(m0Green, m1GreenReversed)
+            done = matching_cost_green_reversed == identity_cost_green_reversed
+
+        if not done:
+            # Otherwise, use the worst of the two matchings.
+            if (
+                matching_cost_control / identity_cost_control
+                < matching_cost_green / identity_cost_green
+            ):
+                matching = matching_control
+                matching_cost = matching_cost_control
+                identity_cost = identity_cost_control
+            else:
+                matching = matching_green
+                matching_cost = matching_cost_green
+                identity_cost = identity_cost_green
+
+    this_tolerance = matching_cost / identity_cost if identity_cost else 1
+    log.debug(
+        "test-contour-order: tolerance %g",
+        this_tolerance,
+    )
+    return this_tolerance, matching

venv/lib/python3.12/site-packages/fontTools/varLib/interpolatableTestStartingPoint.py

@@ -0,0 +1,107 @@
+from .interpolatableHelpers import *
+
+
+def test_starting_point(glyph0, glyph1, ix, tolerance, matching):
+    if matching is None:
+        matching = list(range(len(glyph0.isomorphisms)))
+    contour0 = glyph0.isomorphisms[ix]
+    contour1 = glyph1.isomorphisms[matching[ix]]
+    m0Vectors = glyph0.greenVectors
+    m1Vectors = [glyph1.greenVectors[i] for i in matching]
+
+    c0 = contour0[0]
+    # Next few lines duplicated below.
+    costs = [vdiff_hypot2_complex(c0[0], c1[0]) for c1 in contour1]
+    min_cost_idx, min_cost = min(enumerate(costs), key=lambda x: x[1])
+    first_cost = costs[0]
+    proposed_point = contour1[min_cost_idx][1]
+    reverse = contour1[min_cost_idx][2]
+
+    if min_cost < first_cost * tolerance:
+        # c0 is the first isomorphism of the m0 master
+        # contour1 is list of all isomorphisms of the m1 master
+        #
+        # If the two shapes are both circle-ish and slightly
+        # rotated, we detect wrong start point. This is for
+        # example the case hundreds of times in
+        # RobotoSerif-Italic[GRAD,opsz,wdth,wght].ttf
+        #
+        # If the proposed point is only one off from the first
+        # point (and not reversed), try harder:
+        #
+        # Find the major eigenvector of the covariance matrix,
+        # and rotate the contours by that angle. Then find the
+        # closest point again.  If it matches this time, let it
+        # pass.
+
+        num_points = len(glyph1.points[ix])
+        leeway = 3
+        if not reverse and (
+            proposed_point <= leeway or proposed_point >= num_points - leeway
+        ):
+            # Try harder
+
+            # Recover the covariance matrix from the GreenVectors.
+            # This is a 2x2 matrix.
+            transforms = []
+            for vector in (m0Vectors[ix], m1Vectors[ix]):
+                meanX = vector[1]
+                meanY = vector[2]
+                stddevX = vector[3] * 0.5
+                stddevY = vector[4] * 0.5
+                correlation = vector[5]
+                if correlation:
+                    correlation /= abs(vector[0])
+
+                # https://cookierobotics.com/007/
+                a = stddevX * stddevX  # VarianceX
+                c = stddevY * stddevY  # VarianceY
+                b = correlation * stddevX * stddevY  # Covariance
+
+                delta = (((a - c) * 0.5) ** 2 + b * b) ** 0.5
+                lambda1 = (a + c) * 0.5 + delta  # Major eigenvalue
+                lambda2 = (a + c) * 0.5 - delta  # Minor eigenvalue
+                theta = atan2(lambda1 - a, b) if b != 0 else (pi * 0.5 if a < c else 0)
+                trans = Transform()
+                # Don't translate here. We are working on the complex-vector
+                # that includes more than just the points. It's horrible what
+                # we are doing anyway...
+                # trans = trans.translate(meanX, meanY)
+                trans = trans.rotate(theta)
+                trans = trans.scale(sqrt(lambda1), sqrt(lambda2))
+                transforms.append(trans)
+
+            trans = transforms[0]
+            new_c0 = (
+                [complex(*trans.transformPoint((pt.real, pt.imag))) for pt in c0[0]],
+            ) + c0[1:]
+            trans = transforms[1]
+            new_contour1 = []
+            for c1 in contour1:
+                new_c1 = (
+                    [
+                        complex(*trans.transformPoint((pt.real, pt.imag)))
+                        for pt in c1[0]
+                    ],
+                ) + c1[1:]
+                new_contour1.append(new_c1)
+
+            # Next few lines duplicate from above.
+            costs = [
+                vdiff_hypot2_complex(new_c0[0], new_c1[0]) for new_c1 in new_contour1
+            ]
+            min_cost_idx, min_cost = min(enumerate(costs), key=lambda x: x[1])
+            first_cost = costs[0]
+            if min_cost < first_cost * tolerance:
+                # Don't report this
+                # min_cost = first_cost
+                # reverse = False
+                # proposed_point = 0  # new_contour1[min_cost_idx][1]
+                pass
+
+    this_tolerance = min_cost / first_cost if first_cost else 1
+    log.debug(
+        "test-starting-point: tolerance %g",
+        this_tolerance,
+    )
+    return this_tolerance, proposed_point, reverse

venv/lib/python3.12/site-packages/fontTools/varLib/interpolate_layout.py

@@ -0,0 +1,124 @@
+"""
+Interpolate OpenType Layout tables (GDEF / GPOS / GSUB).
+"""
+
+from fontTools.ttLib import TTFont
+from fontTools.varLib import models, VarLibError, load_designspace, load_masters
+from fontTools.varLib.merger import InstancerMerger
+import os.path
+import logging
+from copy import deepcopy
+from pprint import pformat
+
+log = logging.getLogger("fontTools.varLib.interpolate_layout")
+
+
+def interpolate_layout(designspace, loc, master_finder=lambda s: s, mapped=False):
+    """
+    Interpolate GPOS from a designspace file and location.
+
+    If master_finder is set, it should be a callable that takes master
+    filename as found in designspace file and map it to master font
+    binary as to be opened (eg. .ttf or .otf).
+
+    If mapped is False (default), then location is mapped using the
+    map element of the axes in designspace file.  If mapped is True,
+    it is assumed that location is in designspace's internal space and
+    no mapping is performed.
+    """
+    if hasattr(designspace, "sources"):  # Assume a DesignspaceDocument
+        pass
+    else:  # Assume a file path
+        from fontTools.designspaceLib import DesignSpaceDocument
+
+        designspace = DesignSpaceDocument.fromfile(designspace)
+
+    ds = load_designspace(designspace)
+    log.info("Building interpolated font")
+
+    log.info("Loading master fonts")
+    master_fonts = load_masters(designspace, master_finder)
+    font = deepcopy(master_fonts[ds.base_idx])
+
+    log.info("Location: %s", pformat(loc))
+    if not mapped:
+        loc = {name: ds.axes[name].map_forward(v) for name, v in loc.items()}
+    log.info("Internal location: %s", pformat(loc))
+    loc = models.normalizeLocation(loc, ds.internal_axis_supports)
+    log.info("Normalized location: %s", pformat(loc))
+
+    # Assume single-model for now.
+    model = models.VariationModel(ds.normalized_master_locs)
+    assert 0 == model.mapping[ds.base_idx]
+
+    merger = InstancerMerger(font, model, loc)
+
+    log.info("Building interpolated tables")
+    # TODO GSUB/GDEF
+    merger.mergeTables(font, master_fonts, ["GPOS"])
+    return font
+
+
+def main(args=None):
+    """Interpolate GDEF/GPOS/GSUB tables for a point on a designspace"""
+    from fontTools import configLogger
+    import argparse
+    import sys
+
+    parser = argparse.ArgumentParser(
+        "fonttools varLib.interpolate_layout",
+        description=main.__doc__,
+    )
+    parser.add_argument(
+        "designspace_filename", metavar="DESIGNSPACE", help="Input TTF files"
+    )
+    parser.add_argument(
+        "locations",
+        metavar="LOCATION",
+        type=str,
+        nargs="+",
+        help="Axis locations (e.g. wdth=120",
+    )
+    parser.add_argument(
+        "-o",
+        "--output",
+        metavar="OUTPUT",
+        help="Output font file (defaults to <designspacename>-instance.ttf)",
+    )
+    parser.add_argument(
+        "-l",
+        "--loglevel",
+        metavar="LEVEL",
+        default="INFO",
+        help="Logging level (defaults to INFO)",
+    )
+
+    args = parser.parse_args(args)
+
+    if not args.output:
+        args.output = os.path.splitext(args.designspace_filename)[0] + "-instance.ttf"
+
+    configLogger(level=args.loglevel)
+
+    finder = lambda s: s.replace("master_ufo", "master_ttf_interpolatable").replace(
+        ".ufo", ".ttf"
+    )
+
+    loc = {}
+    for arg in args.locations:
+        tag, val = arg.split("=")
+        loc[tag] = float(val)
+
+    font = interpolate_layout(args.designspace_filename, loc, finder)
+    log.info("Saving font %s", args.output)
+    font.save(args.output)
+
+
+if __name__ == "__main__":
+    import sys
+
+    if len(sys.argv) > 1:
+        sys.exit(main())
+    import doctest
+
+    sys.exit(doctest.testmod().failed)

venv/lib/python3.12/site-packages/fontTools/varLib/iup.py

@@ -0,0 +1,486 @@
+try:
+    import cython
+
+    COMPILED = cython.compiled
+except (AttributeError, ImportError):
+    # if cython not installed, use mock module with no-op decorators and types
+    from fontTools.misc import cython
+
+    COMPILED = False
+
+from typing import (
+    Sequence,
+    Tuple,
+    Union,
+)
+from numbers import Integral, Real
+
+
+_Point = Tuple[Real, Real]
+_Delta = Tuple[Real, Real]
+_PointSegment = Sequence[_Point]
+_DeltaSegment = Sequence[_Delta]
+_DeltaOrNone = Union[_Delta, None]
+_DeltaOrNoneSegment = Sequence[_DeltaOrNone]
+_Endpoints = Sequence[Integral]
+
+
+MAX_LOOKBACK = 8
+
+
+@cython.cfunc
+@cython.locals(
+    j=cython.int,
+    n=cython.int,
+    x1=cython.double,
+    x2=cython.double,
+    d1=cython.double,
+    d2=cython.double,
+    scale=cython.double,
+    x=cython.double,
+    d=cython.double,
+)
+def iup_segment(
+    coords: _PointSegment, rc1: _Point, rd1: _Delta, rc2: _Point, rd2: _Delta
+):  # -> _DeltaSegment:
+    """Given two reference coordinates `rc1` & `rc2` and their respective
+    delta vectors `rd1` & `rd2`, returns interpolated deltas for the set of
+    coordinates `coords`."""
+
+    # rc1 = reference coord 1
+    # rd1 = reference delta 1
+    out_arrays = [None, None]
+    for j in 0, 1:
+        out_arrays[j] = out = []
+        x1, x2, d1, d2 = rc1[j], rc2[j], rd1[j], rd2[j]
+
+        if x1 == x2:
+            n = len(coords)
+            if d1 == d2:
+                out.extend([d1] * n)
+            else:
+                out.extend([0] * n)
+            continue
+
+        if x1 > x2:
+            x1, x2 = x2, x1
+            d1, d2 = d2, d1
+
+        # x1 < x2
+        scale = (d2 - d1) / (x2 - x1)
+        for pair in coords:
+            x = pair[j]
+
+            if x <= x1:
+                d = d1
+            elif x >= x2:
+                d = d2
+            else:
+                # Interpolate
+                d = d1 + (x - x1) * scale
+
+            out.append(d)
+
+    return zip(*out_arrays)
+
+
+def iup_contour(deltas: _DeltaOrNoneSegment, coords: _PointSegment) -> _DeltaSegment:
+    """For the contour given in `coords`, interpolate any missing
+    delta values in delta vector `deltas`.
+
+    Returns fully filled-out delta vector."""
+
+    assert len(deltas) == len(coords)
+    if None not in deltas:
+        return deltas
+
+    n = len(deltas)
+    # indices of points with explicit deltas
+    indices = [i for i, v in enumerate(deltas) if v is not None]
+    if not indices:
+        # All deltas are None.  Return 0,0 for all.
+        return [(0, 0)] * n
+
+    out = []
+    it = iter(indices)
+    start = next(it)
+    if start != 0:
+        # Initial segment that wraps around
+        i1, i2, ri1, ri2 = 0, start, start, indices[-1]
+        out.extend(
+            iup_segment(
+                coords[i1:i2], coords[ri1], deltas[ri1], coords[ri2], deltas[ri2]
+            )
+        )
+    out.append(deltas[start])
+    for end in it:
+        if end - start > 1:
+            i1, i2, ri1, ri2 = start + 1, end, start, end
+            out.extend(
+                iup_segment(
+                    coords[i1:i2], coords[ri1], deltas[ri1], coords[ri2], deltas[ri2]
+                )
+            )
+        out.append(deltas[end])
+        start = end
+    if start != n - 1:
+        # Final segment that wraps around
+        i1, i2, ri1, ri2 = start + 1, n, start, indices[0]
+        out.extend(
+            iup_segment(
+                coords[i1:i2], coords[ri1], deltas[ri1], coords[ri2], deltas[ri2]
+            )
+        )
+
+    assert len(deltas) == len(out), (len(deltas), len(out))
+    return out
+
+
+def iup_delta(
+    deltas: _DeltaOrNoneSegment, coords: _PointSegment, ends: _Endpoints
+) -> _DeltaSegment:
+    """For the outline given in `coords`, with contour endpoints given
+    in sorted increasing order in `ends`, interpolate any missing
+    delta values in delta vector `deltas`.
+
+    Returns fully filled-out delta vector."""
+
+    assert sorted(ends) == ends and len(coords) == (ends[-1] + 1 if ends else 0) + 4
+    n = len(coords)
+    ends = ends + [n - 4, n - 3, n - 2, n - 1]
+    out = []
+    start = 0
+    for end in ends:
+        end += 1
+        contour = iup_contour(deltas[start:end], coords[start:end])
+        out.extend(contour)
+        start = end
+
+    return out
+
+
+# Optimizer
+
+
+@cython.cfunc
+@cython.inline
+@cython.locals(
+    i=cython.int,
+    j=cython.int,
+    # tolerance=cython.double, # https://github.com/fonttools/fonttools/issues/3282
+    x=cython.double,
+    y=cython.double,
+    p=cython.double,
+    q=cython.double,
+)
+@cython.returns(int)
+def can_iup_in_between(
+    deltas: _DeltaSegment,
+    coords: _PointSegment,
+    i: Integral,
+    j: Integral,
+    tolerance: Real,
+):  # -> bool:
+    """Return true if the deltas for points at `i` and `j` (`i < j`) can be
+    successfully used to interpolate deltas for points in between them within
+    provided error tolerance."""
+
+    assert j - i >= 2
+    interp = iup_segment(coords[i + 1 : j], coords[i], deltas[i], coords[j], deltas[j])
+    deltas = deltas[i + 1 : j]
+
+    return all(
+        abs(complex(x - p, y - q)) <= tolerance
+        for (x, y), (p, q) in zip(deltas, interp)
+    )
+
+
+@cython.locals(
+    cj=cython.double,
+    dj=cython.double,
+    lcj=cython.double,
+    ldj=cython.double,
+    ncj=cython.double,
+    ndj=cython.double,
+    force=cython.int,
+    forced=set,
+)
+def _iup_contour_bound_forced_set(
+    deltas: _DeltaSegment, coords: _PointSegment, tolerance: Real = 0
+) -> set:
+    """The forced set is a conservative set of points on the contour that must be encoded
+    explicitly (ie. cannot be interpolated).  Calculating this set allows for significantly
+    speeding up the dynamic-programming, as well as resolve circularity in DP.
+
+    The set is precise; that is, if an index is in the returned set, then there is no way
+    that IUP can generate delta for that point, given `coords` and `deltas`.
+    """
+    assert len(deltas) == len(coords)
+
+    n = len(deltas)
+    forced = set()
+    # Track "last" and "next" points on the contour as we sweep.
+    for i in range(len(deltas) - 1, -1, -1):
+        ld, lc = deltas[i - 1], coords[i - 1]
+        d, c = deltas[i], coords[i]
+        nd, nc = deltas[i - n + 1], coords[i - n + 1]
+
+        for j in (0, 1):  # For X and for Y
+            cj = c[j]
+            dj = d[j]
+            lcj = lc[j]
+            ldj = ld[j]
+            ncj = nc[j]
+            ndj = nd[j]
+
+            if lcj <= ncj:
+                c1, c2 = lcj, ncj
+                d1, d2 = ldj, ndj
+            else:
+                c1, c2 = ncj, lcj
+                d1, d2 = ndj, ldj
+
+            force = False
+
+            # If the two coordinates are the same, then the interpolation
+            # algorithm produces the same delta if both deltas are equal,
+            # and zero if they differ.
+            #
+            # This test has to be before the next one.
+            if c1 == c2:
+                if abs(d1 - d2) > tolerance and abs(dj) > tolerance:
+                    force = True
+
+            # If coordinate for current point is between coordinate of adjacent
+            # points on the two sides, but the delta for current point is NOT
+            # between delta for those adjacent points (considering tolerance
+            # allowance), then there is no way that current point can be IUP-ed.
+            # Mark it forced.
+            elif c1 <= cj <= c2:  # and c1 != c2
+                if not (min(d1, d2) - tolerance <= dj <= max(d1, d2) + tolerance):
+                    force = True
+
+            # Otherwise, the delta should either match the closest, or have the
+            # same sign as the interpolation of the two deltas.
+            else:  # cj < c1 or c2 < cj
+                if d1 != d2:
+                    if cj < c1:
+                        if (
+                            abs(dj) > tolerance
+                            and abs(dj - d1) > tolerance
+                            and ((dj - tolerance < d1) != (d1 < d2))
+                        ):
+                            force = True
+                    else:  # c2 < cj
+                        if (
+                            abs(dj) > tolerance
+                            and abs(dj - d2) > tolerance
+                            and ((d2 < dj + tolerance) != (d1 < d2))
+                        ):
+                            force = True
+
+            if force:
+                forced.add(i)
+                break
+
+    return forced
+
+
+@cython.locals(
+    i=cython.int,
+    j=cython.int,
+    best_cost=cython.double,
+    best_j=cython.int,
+    cost=cython.double,
+    forced=set,
+    tolerance=cython.double,
+)
+def _iup_contour_optimize_dp(
+    deltas: _DeltaSegment,
+    coords: _PointSegment,
+    forced=set(),
+    tolerance: Real = 0,
+    lookback: Integral = None,
+):
+    """Straightforward Dynamic-Programming.  For each index i, find least-costly encoding of
+    points 0 to i where i is explicitly encoded.  We find this by considering all previous
+    explicit points j and check whether interpolation can fill points between j and i.
+
+    Note that solution always encodes last point explicitly.  Higher-level is responsible
+    for removing that restriction.
+
+    As major speedup, we stop looking further whenever we see a "forced" point."""
+
+    n = len(deltas)
+    if lookback is None:
+        lookback = n
+    lookback = min(lookback, MAX_LOOKBACK)
+    costs = {-1: 0}
+    chain = {-1: None}
+    for i in range(0, n):
+        best_cost = costs[i - 1] + 1
+
+        costs[i] = best_cost
+        chain[i] = i - 1
+
+        if i - 1 in forced:
+            continue
+
+        for j in range(i - 2, max(i - lookback, -2), -1):
+            cost = costs[j] + 1
+
+            if cost < best_cost and can_iup_in_between(deltas, coords, j, i, tolerance):
+                costs[i] = best_cost = cost
+                chain[i] = j
+
+            if j in forced:
+                break
+
+    return chain, costs
+
+
+def _rot_list(l: list, k: int):
+    """Rotate list by k items forward.  Ie. item at position 0 will be
+    at position k in returned list.  Negative k is allowed."""
+    n = len(l)
+    k %= n
+    if not k:
+        return l
+    return l[n - k :] + l[: n - k]
+
+
+def _rot_set(s: set, k: int, n: int):
+    k %= n
+    if not k:
+        return s
+    return {(v + k) % n for v in s}
+
+
+def iup_contour_optimize(
+    deltas: _DeltaSegment, coords: _PointSegment, tolerance: Real = 0.0
+) -> _DeltaOrNoneSegment:
+    """For contour with coordinates `coords`, optimize a set of delta
+    values `deltas` within error `tolerance`.
+
+    Returns delta vector that has most number of None items instead of
+    the input delta.
+    """
+
+    n = len(deltas)
+
+    # Get the easy cases out of the way:
+
+    # If all are within tolerance distance of 0, encode nothing:
+    if all(abs(complex(*p)) <= tolerance for p in deltas):
+        return [None] * n
+
+    # If there's exactly one point, return it:
+    if n == 1:
+        return deltas
+
+    # If all deltas are exactly the same, return just one (the first one):
+    d0 = deltas[0]
+    if all(d0 == d for d in deltas):
+        return [d0] + [None] * (n - 1)
+
+    # Else, solve the general problem using Dynamic Programming.
+
+    forced = _iup_contour_bound_forced_set(deltas, coords, tolerance)
+    # The _iup_contour_optimize_dp() routine returns the optimal encoding
+    # solution given the constraint that the last point is always encoded.
+    # To remove this constraint, we use two different methods, depending on
+    # whether forced set is non-empty or not:
+
+    # Debugging: Make the next if always take the second branch and observe
+    # if the font size changes (reduced); that would mean the forced-set
+    # has members it should not have.
+    if forced:
+        # Forced set is non-empty: rotate the contour start point
+        # such that the last point in the list is a forced point.
+        k = (n - 1) - max(forced)
+        assert k >= 0
+
+        deltas = _rot_list(deltas, k)
+        coords = _rot_list(coords, k)
+        forced = _rot_set(forced, k, n)
+
+        # Debugging: Pass a set() instead of forced variable to the next call
+        # to exercise forced-set computation for under-counting.
+        chain, costs = _iup_contour_optimize_dp(deltas, coords, forced, tolerance)
+
+        # Assemble solution.
+        solution = set()
+        i = n - 1
+        while i is not None:
+            solution.add(i)
+            i = chain[i]
+        solution.remove(-1)
+
+        # if not forced <= solution:
+        # 	print("coord", coords)
+        # 	print("deltas", deltas)
+        # 	print("len", len(deltas))
+        assert forced <= solution, (forced, solution)
+
+        deltas = [deltas[i] if i in solution else None for i in range(n)]
+
+        deltas = _rot_list(deltas, -k)
+    else:
+        # Repeat the contour an extra time, solve the new case, then look for solutions of the
+        # circular n-length problem in the solution for new linear case.  I cannot prove that
+        # this always produces the optimal solution...
+        chain, costs = _iup_contour_optimize_dp(
+            deltas + deltas, coords + coords, forced, tolerance, n
+        )
+        best_sol, best_cost = None, n + 1
+
+        for start in range(n - 1, len(costs) - 1):
+            # Assemble solution.
+            solution = set()
+            i = start
+            while i > start - n:
+                solution.add(i % n)
+                i = chain[i]
+            if i == start - n:
+                cost = costs[start] - costs[start - n]
+                if cost <= best_cost:
+                    best_sol, best_cost = solution, cost
+
+        # if not forced <= best_sol:
+        # 	print("coord", coords)
+        # 	print("deltas", deltas)
+        # 	print("len", len(deltas))
+        assert forced <= best_sol, (forced, best_sol)
+
+        deltas = [deltas[i] if i in best_sol else None for i in range(n)]
+
+    return deltas
+
+
+def iup_delta_optimize(
+    deltas: _DeltaSegment,
+    coords: _PointSegment,
+    ends: _Endpoints,
+    tolerance: Real = 0.0,
+) -> _DeltaOrNoneSegment:
+    """For the outline given in `coords`, with contour endpoints given
+    in sorted increasing order in `ends`, optimize a set of delta
+    values `deltas` within error `tolerance`.
+
+    Returns delta vector that has most number of None items instead of
+    the input delta.
+    """
+    assert sorted(ends) == ends and len(coords) == (ends[-1] + 1 if ends else 0) + 4
+    n = len(coords)
+    ends = ends + [n - 4, n - 3, n - 2, n - 1]
+    out = []
+    start = 0
+    for end in ends:
+        contour = iup_contour_optimize(
+            deltas[start : end + 1], coords[start : end + 1], tolerance
+        )
+        assert len(contour) == end - start + 1
+        out.extend(contour)
+        start = end + 1
+
+    return out

venv/lib/python3.12/site-packages/fontTools/varLib/models.py

@@ -0,0 +1,642 @@
+"""Variation fonts interpolation models."""
+
+__all__ = [
+    "normalizeValue",
+    "normalizeLocation",
+    "supportScalar",
+    "piecewiseLinearMap",
+    "VariationModel",
+]
+
+from fontTools.misc.roundTools import noRound
+from .errors import VariationModelError
+
+
+def nonNone(lst):
+    return [l for l in lst if l is not None]
+
+
+def allNone(lst):
+    return all(l is None for l in lst)
+
+
+def allEqualTo(ref, lst, mapper=None):
+    if mapper is None:
+        return all(ref == item for item in lst)
+
+    mapped = mapper(ref)
+    return all(mapped == mapper(item) for item in lst)
+
+
+def allEqual(lst, mapper=None):
+    if not lst:
+        return True
+    it = iter(lst)
+    try:
+        first = next(it)
+    except StopIteration:
+        return True
+    return allEqualTo(first, it, mapper=mapper)
+
+
+def subList(truth, lst):
+    assert len(truth) == len(lst)
+    return [l for l, t in zip(lst, truth) if t]
+
+
+def normalizeValue(v, triple, extrapolate=False):
+    """Normalizes value based on a min/default/max triple.
+
+    >>> normalizeValue(400, (100, 400, 900))
+    0.0
+    >>> normalizeValue(100, (100, 400, 900))
+    -1.0
+    >>> normalizeValue(650, (100, 400, 900))
+    0.5
+    """
+    lower, default, upper = triple
+    if not (lower <= default <= upper):
+        raise ValueError(
+            f"Invalid axis values, must be minimum, default, maximum: "
+            f"{lower:3.3f}, {default:3.3f}, {upper:3.3f}"
+        )
+    if not extrapolate:
+        v = max(min(v, upper), lower)
+
+    if v == default or lower == upper:
+        return 0.0
+
+    if (v < default and lower != default) or (v > default and upper == default):
+        return (v - default) / (default - lower)
+    else:
+        assert (v > default and upper != default) or (
+            v < default and lower == default
+        ), f"Ooops... v={v}, triple=({lower}, {default}, {upper})"
+        return (v - default) / (upper - default)
+
+
+def normalizeLocation(location, axes, extrapolate=False, *, validate=False):
+    """Normalizes location based on axis min/default/max values from axes.
+
+    >>> axes = {"wght": (100, 400, 900)}
+    >>> normalizeLocation({"wght": 400}, axes)
+    {'wght': 0.0}
+    >>> normalizeLocation({"wght": 100}, axes)
+    {'wght': -1.0}
+    >>> normalizeLocation({"wght": 900}, axes)
+    {'wght': 1.0}
+    >>> normalizeLocation({"wght": 650}, axes)
+    {'wght': 0.5}
+    >>> normalizeLocation({"wght": 1000}, axes)
+    {'wght': 1.0}
+    >>> normalizeLocation({"wght": 0}, axes)
+    {'wght': -1.0}
+    >>> axes = {"wght": (0, 0, 1000)}
+    >>> normalizeLocation({"wght": 0}, axes)
+    {'wght': 0.0}
+    >>> normalizeLocation({"wght": -1}, axes)
+    {'wght': 0.0}
+    >>> normalizeLocation({"wght": 1000}, axes)
+    {'wght': 1.0}
+    >>> normalizeLocation({"wght": 500}, axes)
+    {'wght': 0.5}
+    >>> normalizeLocation({"wght": 1001}, axes)
+    {'wght': 1.0}
+    >>> axes = {"wght": (0, 1000, 1000)}
+    >>> normalizeLocation({"wght": 0}, axes)
+    {'wght': -1.0}
+    >>> normalizeLocation({"wght": -1}, axes)
+    {'wght': -1.0}
+    >>> normalizeLocation({"wght": 500}, axes)
+    {'wght': -0.5}
+    >>> normalizeLocation({"wght": 1000}, axes)
+    {'wght': 0.0}
+    >>> normalizeLocation({"wght": 1001}, axes)
+    {'wght': 0.0}
+    """
+    if validate:
+        assert set(location.keys()) <= set(axes.keys()), set(location.keys()) - set(
+            axes.keys()
+        )
+    out = {}
+    for tag, triple in axes.items():
+        v = location.get(tag, triple[1])
+        out[tag] = normalizeValue(v, triple, extrapolate=extrapolate)
+    return out
+
+
+def supportScalar(location, support, ot=True, extrapolate=False, axisRanges=None):
+    """Returns the scalar multiplier at location, for a master
+    with support.  If ot is True, then a peak value of zero
+    for support of an axis means "axis does not participate".  That
+    is how OpenType Variation Font technology works.
+
+    If extrapolate is True, axisRanges must be a dict that maps axis
+    names to (axisMin, axisMax) tuples.
+
+      >>> supportScalar({}, {})
+      1.0
+      >>> supportScalar({'wght':.2}, {})
+      1.0
+      >>> supportScalar({'wght':.2}, {'wght':(0,2,3)})
+      0.1
+      >>> supportScalar({'wght':2.5}, {'wght':(0,2,4)})
+      0.75
+      >>> supportScalar({'wght':2.5, 'wdth':0}, {'wght':(0,2,4), 'wdth':(-1,0,+1)})
+      0.75
+      >>> supportScalar({'wght':2.5, 'wdth':.5}, {'wght':(0,2,4), 'wdth':(-1,0,+1)}, ot=False)
+      0.375
+      >>> supportScalar({'wght':2.5, 'wdth':0}, {'wght':(0,2,4), 'wdth':(-1,0,+1)})
+      0.75
+      >>> supportScalar({'wght':2.5, 'wdth':.5}, {'wght':(0,2,4), 'wdth':(-1,0,+1)})
+      0.75
+      >>> supportScalar({'wght':3}, {'wght':(0,1,2)}, extrapolate=True, axisRanges={'wght':(0, 2)})
+      -1.0
+      >>> supportScalar({'wght':-1}, {'wght':(0,1,2)}, extrapolate=True, axisRanges={'wght':(0, 2)})
+      -1.0
+      >>> supportScalar({'wght':3}, {'wght':(0,2,2)}, extrapolate=True, axisRanges={'wght':(0, 2)})
+      1.5
+      >>> supportScalar({'wght':-1}, {'wght':(0,2,2)}, extrapolate=True, axisRanges={'wght':(0, 2)})
+      -0.5
+    """
+    if extrapolate and axisRanges is None:
+        raise TypeError("axisRanges must be passed when extrapolate is True")
+    scalar = 1.0
+    for axis, (lower, peak, upper) in support.items():
+        if ot:
+            # OpenType-specific case handling
+            if peak == 0.0:
+                continue
+            if lower > peak or peak > upper:
+                continue
+            if lower < 0.0 and upper > 0.0:
+                continue
+            v = location.get(axis, 0.0)
+        else:
+            assert axis in location
+            v = location[axis]
+        if v == peak:
+            continue
+
+        if extrapolate:
+            axisMin, axisMax = axisRanges[axis]
+            if v < axisMin and lower <= axisMin:
+                if peak <= axisMin and peak < upper:
+                    scalar *= (v - upper) / (peak - upper)
+                    continue
+                elif axisMin < peak:
+                    scalar *= (v - lower) / (peak - lower)
+                    continue
+            elif axisMax < v and axisMax <= upper:
+                if axisMax <= peak and lower < peak:
+                    scalar *= (v - lower) / (peak - lower)
+                    continue
+                elif peak < axisMax:
+                    scalar *= (v - upper) / (peak - upper)
+                    continue
+
+        if v <= lower or upper <= v:
+            scalar = 0.0
+            break
+
+        if v < peak:
+            scalar *= (v - lower) / (peak - lower)
+        else:  # v > peak
+            scalar *= (v - upper) / (peak - upper)
+    return scalar
+
+
+class VariationModel(object):
+    """Locations must have the base master at the origin (ie. 0).
+
+    If axis-ranges are not provided, values are assumed to be normalized to
+    the range [-1, 1].
+
+    If the extrapolate argument is set to True, then values are extrapolated
+    outside the axis range.
+
+      >>> from pprint import pprint
+      >>> axisRanges = {'wght': (-180, +180), 'wdth': (-1, +1)}
+      >>> locations = [ \
+      {'wght':100}, \
+      {'wght':-100}, \
+      {'wght':-180}, \
+      {'wdth':+.3}, \
+      {'wght':+120,'wdth':.3}, \
+      {'wght':+120,'wdth':.2}, \
+      {}, \
+      {'wght':+180,'wdth':.3}, \
+      {'wght':+180}, \
+      ]
+      >>> model = VariationModel(locations, axisOrder=['wght'], axisRanges=axisRanges)
+      >>> pprint(model.locations)
+      [{},
+       {'wght': -100},
+       {'wght': -180},
+       {'wght': 100},
+       {'wght': 180},
+       {'wdth': 0.3},
+       {'wdth': 0.3, 'wght': 180},
+       {'wdth': 0.3, 'wght': 120},
+       {'wdth': 0.2, 'wght': 120}]
+      >>> pprint(model.deltaWeights)
+      [{},
+       {0: 1.0},
+       {0: 1.0},
+       {0: 1.0},
+       {0: 1.0},
+       {0: 1.0},
+       {0: 1.0, 4: 1.0, 5: 1.0},
+       {0: 1.0, 3: 0.75, 4: 0.25, 5: 1.0, 6: 0.6666666666666666},
+       {0: 1.0,
+        3: 0.75,
+        4: 0.25,
+        5: 0.6666666666666667,
+        6: 0.4444444444444445,
+        7: 0.6666666666666667}]
+    """
+
+    def __init__(
+        self, locations, axisOrder=None, extrapolate=False, *, axisRanges=None
+    ):
+        if len(set(tuple(sorted(l.items())) for l in locations)) != len(locations):
+            raise VariationModelError("Locations must be unique.")
+
+        self.origLocations = locations
+        self.axisOrder = axisOrder if axisOrder is not None else []
+        self.extrapolate = extrapolate
+        if axisRanges is None:
+            if extrapolate:
+                axisRanges = self.computeAxisRanges(locations)
+            else:
+                allAxes = {axis for loc in locations for axis in loc.keys()}
+                axisRanges = {axis: (-1, 1) for axis in allAxes}
+        self.axisRanges = axisRanges
+
+        locations = [{k: v for k, v in loc.items() if v != 0.0} for loc in locations]
+        keyFunc = self.getMasterLocationsSortKeyFunc(
+            locations, axisOrder=self.axisOrder
+        )
+        self.locations = sorted(locations, key=keyFunc)
+
+        # Mapping from user's master order to our master order
+        self.mapping = [self.locations.index(l) for l in locations]
+        self.reverseMapping = [locations.index(l) for l in self.locations]
+
+        self._computeMasterSupports()
+        self._subModels = {}
+
+    def getSubModel(self, items):
+        """Return a sub-model and the items that are not None.
+
+        The sub-model is necessary for working with the subset
+        of items when some are None.
+
+        The sub-model is cached."""
+        if None not in items:
+            return self, items
+        key = tuple(v is not None for v in items)
+        subModel = self._subModels.get(key)
+        if subModel is None:
+            subModel = VariationModel(subList(key, self.origLocations), self.axisOrder)
+            self._subModels[key] = subModel
+        return subModel, subList(key, items)
+
+    @staticmethod
+    def computeAxisRanges(locations):
+        axisRanges = {}
+        allAxes = {axis for loc in locations for axis in loc.keys()}
+        for loc in locations:
+            for axis in allAxes:
+                value = loc.get(axis, 0)
+                axisMin, axisMax = axisRanges.get(axis, (value, value))
+                axisRanges[axis] = min(value, axisMin), max(value, axisMax)
+        return axisRanges
+
+    @staticmethod
+    def getMasterLocationsSortKeyFunc(locations, axisOrder=[]):
+        if {} not in locations:
+            raise VariationModelError("Base master not found.")
+        axisPoints = {}
+        for loc in locations:
+            if len(loc) != 1:
+                continue
+            axis = next(iter(loc))
+            value = loc[axis]
+            if axis not in axisPoints:
+                axisPoints[axis] = {0.0}
+            assert (
+                value not in axisPoints[axis]
+            ), 'Value "%s" in axisPoints["%s"] -->  %s' % (value, axis, axisPoints)
+            axisPoints[axis].add(value)
+
+        def getKey(axisPoints, axisOrder):
+            def sign(v):
+                return -1 if v < 0 else +1 if v > 0 else 0
+
+            def key(loc):
+                rank = len(loc)
+                onPointAxes = [
+                    axis
+                    for axis, value in loc.items()
+                    if axis in axisPoints and value in axisPoints[axis]
+                ]
+                orderedAxes = [axis for axis in axisOrder if axis in loc]
+                orderedAxes.extend(
+                    [axis for axis in sorted(loc.keys()) if axis not in axisOrder]
+                )
+                return (
+                    rank,  # First, order by increasing rank
+                    -len(onPointAxes),  # Next, by decreasing number of onPoint axes
+                    tuple(
+                        axisOrder.index(axis) if axis in axisOrder else 0x10000
+                        for axis in orderedAxes
+                    ),  # Next, by known axes
+                    tuple(orderedAxes),  # Next, by all axes
+                    tuple(
+                        sign(loc[axis]) for axis in orderedAxes
+                    ),  # Next, by signs of axis values
+                    tuple(
+                        abs(loc[axis]) for axis in orderedAxes
+                    ),  # Next, by absolute value of axis values
+                )
+
+            return key
+
+        ret = getKey(axisPoints, axisOrder)
+        return ret
+
+    def reorderMasters(self, master_list, mapping):
+        # For changing the master data order without
+        # recomputing supports and deltaWeights.
+        new_list = [master_list[idx] for idx in mapping]
+        self.origLocations = [self.origLocations[idx] for idx in mapping]
+        locations = [
+            {k: v for k, v in loc.items() if v != 0.0} for loc in self.origLocations
+        ]
+        self.mapping = [self.locations.index(l) for l in locations]
+        self.reverseMapping = [locations.index(l) for l in self.locations]
+        self._subModels = {}
+        return new_list
+
+    def _computeMasterSupports(self):
+        self.supports = []
+        regions = self._locationsToRegions()
+        for i, region in enumerate(regions):
+            locAxes = set(region.keys())
+            # Walk over previous masters now
+            for prev_region in regions[:i]:
+                # Master with different axes do not participte
+                if set(prev_region.keys()) != locAxes:
+                    continue
+                # If it's NOT in the current box, it does not participate
+                relevant = True
+                for axis, (lower, peak, upper) in region.items():
+                    if not (
+                        prev_region[axis][1] == peak
+                        or lower < prev_region[axis][1] < upper
+                    ):
+                        relevant = False
+                        break
+                if not relevant:
+                    continue
+
+                # Split the box for new master; split in whatever direction
+                # that has largest range ratio.
+                #
+                # For symmetry, we actually cut across multiple axes
+                # if they have the largest, equal, ratio.
+                # https://github.com/fonttools/fonttools/commit/7ee81c8821671157968b097f3e55309a1faa511e#commitcomment-31054804
+
+                bestAxes = {}
+                bestRatio = -1
+                for axis in prev_region.keys():
+                    val = prev_region[axis][1]
+                    assert axis in region
+                    lower, locV, upper = region[axis]
+                    newLower, newUpper = lower, upper
+                    if val < locV:
+                        newLower = val
+                        ratio = (val - locV) / (lower - locV)
+                    elif locV < val:
+                        newUpper = val
+                        ratio = (val - locV) / (upper - locV)
+                    else:  # val == locV
+                        # Can't split box in this direction.
+                        continue
+                    if ratio > bestRatio:
+                        bestAxes = {}
+                        bestRatio = ratio
+                    if ratio == bestRatio:
+                        bestAxes[axis] = (newLower, locV, newUpper)
+
+                for axis, triple in bestAxes.items():
+                    region[axis] = triple
+            self.supports.append(region)
+        self._computeDeltaWeights()
+
+    def _locationsToRegions(self):
+        locations = self.locations
+        axisRanges = self.axisRanges
+
+        regions = []
+        for loc in locations:
+            region = {}
+            for axis, locV in loc.items():
+                if locV > 0:
+                    region[axis] = (0, locV, axisRanges[axis][1])
+                else:
+                    region[axis] = (axisRanges[axis][0], locV, 0)
+            regions.append(region)
+        return regions
+
+    def _computeDeltaWeights(self):
+        self.deltaWeights = []
+        for i, loc in enumerate(self.locations):
+            deltaWeight = {}
+            # Walk over previous masters now, populate deltaWeight
+            for j, support in enumerate(self.supports[:i]):
+                scalar = supportScalar(loc, support)
+                if scalar:
+                    deltaWeight[j] = scalar
+            self.deltaWeights.append(deltaWeight)
+
+    def getDeltas(self, masterValues, *, round=noRound):
+        assert len(masterValues) == len(self.deltaWeights), (
+            len(masterValues),
+            len(self.deltaWeights),
+        )
+        mapping = self.reverseMapping
+        out = []
+        for i, weights in enumerate(self.deltaWeights):
+            delta = masterValues[mapping[i]]
+            for j, weight in weights.items():
+                if weight == 1:
+                    delta -= out[j]
+                else:
+                    delta -= out[j] * weight
+            out.append(round(delta))
+        return out
+
+    def getDeltasAndSupports(self, items, *, round=noRound):
+        model, items = self.getSubModel(items)
+        return model.getDeltas(items, round=round), model.supports
+
+    def getScalars(self, loc):
+        """Return scalars for each delta, for the given location.
+        If interpolating many master-values at the same location,
+        this function allows speed up by fetching the scalars once
+        and using them with interpolateFromMastersAndScalars()."""
+        return [
+            supportScalar(
+                loc, support, extrapolate=self.extrapolate, axisRanges=self.axisRanges
+            )
+            for support in self.supports
+        ]
+
+    def getMasterScalars(self, targetLocation):
+        """Return multipliers for each master, for the given location.
+        If interpolating many master-values at the same location,
+        this function allows speed up by fetching the scalars once
+        and using them with interpolateFromValuesAndScalars().
+
+        Note that the scalars used in interpolateFromMastersAndScalars(),
+        are *not* the same as the ones returned here. They are the result
+        of getScalars()."""
+        out = self.getScalars(targetLocation)
+        for i, weights in reversed(list(enumerate(self.deltaWeights))):
+            for j, weight in weights.items():
+                out[j] -= out[i] * weight
+
+        out = [out[self.mapping[i]] for i in range(len(out))]
+        return out
+
+    @staticmethod
+    def interpolateFromValuesAndScalars(values, scalars):
+        """Interpolate from values and scalars coefficients.
+
+        If the values are master-values, then the scalars should be
+        fetched from getMasterScalars().
+
+        If the values are deltas, then the scalars should be fetched
+        from getScalars(); in which case this is the same as
+        interpolateFromDeltasAndScalars().
+        """
+        v = None
+        assert len(values) == len(scalars)
+        for value, scalar in zip(values, scalars):
+            if not scalar:
+                continue
+            contribution = value * scalar
+            if v is None:
+                v = contribution
+            else:
+                v += contribution
+        return v
+
+    @staticmethod
+    def interpolateFromDeltasAndScalars(deltas, scalars):
+        """Interpolate from deltas and scalars fetched from getScalars()."""
+        return VariationModel.interpolateFromValuesAndScalars(deltas, scalars)
+
+    def interpolateFromDeltas(self, loc, deltas):
+        """Interpolate from deltas, at location loc."""
+        scalars = self.getScalars(loc)
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+    def interpolateFromMasters(self, loc, masterValues, *, round=noRound):
+        """Interpolate from master-values, at location loc."""
+        scalars = self.getMasterScalars(loc)
+        return self.interpolateFromValuesAndScalars(masterValues, scalars)
+
+    def interpolateFromMastersAndScalars(self, masterValues, scalars, *, round=noRound):
+        """Interpolate from master-values, and scalars fetched from
+        getScalars(), which is useful when you want to interpolate
+        multiple master-values with the same location."""
+        deltas = self.getDeltas(masterValues, round=round)
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+
+def piecewiseLinearMap(v, mapping):
+    keys = mapping.keys()
+    if not keys:
+        return v
+    if v in keys:
+        return mapping[v]
+    k = min(keys)
+    if v < k:
+        return v + mapping[k] - k
+    k = max(keys)
+    if v > k:
+        return v + mapping[k] - k
+    # Interpolate
+    a = max(k for k in keys if k < v)
+    b = min(k for k in keys if k > v)
+    va = mapping[a]
+    vb = mapping[b]
+    return va + (vb - va) * (v - a) / (b - a)
+
+
+def main(args=None):
+    """Normalize locations on a given designspace"""
+    from fontTools import configLogger
+    import argparse
+
+    parser = argparse.ArgumentParser(
+        "fonttools varLib.models",
+        description=main.__doc__,
+    )
+    parser.add_argument(
+        "--loglevel",
+        metavar="LEVEL",
+        default="INFO",
+        help="Logging level (defaults to INFO)",
+    )
+
+    group = parser.add_mutually_exclusive_group(required=True)
+    group.add_argument("-d", "--designspace", metavar="DESIGNSPACE", type=str)
+    group.add_argument(
+        "-l",
+        "--locations",
+        metavar="LOCATION",
+        nargs="+",
+        help="Master locations as comma-separate coordinates. One must be all zeros.",
+    )
+
+    args = parser.parse_args(args)
+
+    configLogger(level=args.loglevel)
+    from pprint import pprint
+
+    if args.designspace:
+        from fontTools.designspaceLib import DesignSpaceDocument
+
+        doc = DesignSpaceDocument()
+        doc.read(args.designspace)
+        locs = [s.location for s in doc.sources]
+        print("Original locations:")
+        pprint(locs)
+        doc.normalize()
+        print("Normalized locations:")
+        locs = [s.location for s in doc.sources]
+        pprint(locs)
+    else:
+        axes = [chr(c) for c in range(ord("A"), ord("Z") + 1)]
+        locs = [
+            dict(zip(axes, (float(v) for v in s.split(",")))) for s in args.locations
+        ]
+
+    model = VariationModel(locs)
+    print("Sorted locations:")
+    pprint(model.locations)
+    print("Supports:")
+    pprint(model.supports)
+
+
+if __name__ == "__main__":
+    import doctest, sys
+
+    if len(sys.argv) > 1:
+        sys.exit(main())
+
+    sys.exit(doctest.testmod().failed)

venv/lib/python3.12/site-packages/fontTools/varLib/multiVarStore.py

@@ -0,0 +1,253 @@
+from fontTools.misc.roundTools import noRound, otRound
+from fontTools.misc.intTools import bit_count
+from fontTools.misc.vector import Vector
+from fontTools.ttLib.tables import otTables as ot
+from fontTools.varLib.models import supportScalar
+import fontTools.varLib.varStore  # For monkey-patching
+from fontTools.varLib.builder import (
+    buildVarRegionList,
+    buildSparseVarRegionList,
+    buildSparseVarRegion,
+    buildMultiVarStore,
+    buildMultiVarData,
+)
+from fontTools.misc.iterTools import batched
+from functools import partial
+from collections import defaultdict
+from heapq import heappush, heappop
+
+
+NO_VARIATION_INDEX = ot.NO_VARIATION_INDEX
+ot.MultiVarStore.NO_VARIATION_INDEX = NO_VARIATION_INDEX
+
+
+def _getLocationKey(loc):
+    return tuple(sorted(loc.items(), key=lambda kv: kv[0]))
+
+
+class OnlineMultiVarStoreBuilder(object):
+    def __init__(self, axisTags):
+        self._axisTags = axisTags
+        self._regionMap = {}
+        self._regionList = buildSparseVarRegionList([], axisTags)
+        self._store = buildMultiVarStore(self._regionList, [])
+        self._data = None
+        self._model = None
+        self._supports = None
+        self._varDataIndices = {}
+        self._varDataCaches = {}
+        self._cache = None
+
+    def setModel(self, model):
+        self.setSupports(model.supports)
+        self._model = model
+
+    def setSupports(self, supports):
+        self._model = None
+        self._supports = list(supports)
+        if not self._supports[0]:
+            del self._supports[0]  # Drop base master support
+        self._cache = None
+        self._data = None
+
+    def finish(self):
+        self._regionList.RegionCount = len(self._regionList.Region)
+        self._store.MultiVarDataCount = len(self._store.MultiVarData)
+        return self._store
+
+    def _add_MultiVarData(self):
+        regionMap = self._regionMap
+        regionList = self._regionList
+
+        regions = self._supports
+        regionIndices = []
+        for region in regions:
+            key = _getLocationKey(region)
+            idx = regionMap.get(key)
+            if idx is None:
+                varRegion = buildSparseVarRegion(region, self._axisTags)
+                idx = regionMap[key] = len(regionList.Region)
+                regionList.Region.append(varRegion)
+            regionIndices.append(idx)
+
+        # Check if we have one already...
+        key = tuple(regionIndices)
+        varDataIdx = self._varDataIndices.get(key)
+        if varDataIdx is not None:
+            self._outer = varDataIdx
+            self._data = self._store.MultiVarData[varDataIdx]
+            self._cache = self._varDataCaches[key]
+            if len(self._data.Item) == 0xFFFF:
+                # This is full.  Need new one.
+                varDataIdx = None
+
+        if varDataIdx is None:
+            self._data = buildMultiVarData(regionIndices, [])
+            self._outer = len(self._store.MultiVarData)
+            self._store.MultiVarData.append(self._data)
+            self._varDataIndices[key] = self._outer
+            if key not in self._varDataCaches:
+                self._varDataCaches[key] = {}
+            self._cache = self._varDataCaches[key]
+
+    def storeMasters(self, master_values, *, round=round):
+        deltas = self._model.getDeltas(master_values, round=round)
+        base = deltas.pop(0)
+        return base, self.storeDeltas(deltas, round=noRound)
+
+    def storeDeltas(self, deltas, *, round=round):
+        deltas = tuple(round(d) for d in deltas)
+
+        if not any(deltas):
+            return NO_VARIATION_INDEX
+
+        deltas_tuple = tuple(tuple(d) for d in deltas)
+
+        if not self._data:
+            self._add_MultiVarData()
+
+        varIdx = self._cache.get(deltas_tuple)
+        if varIdx is not None:
+            return varIdx
+
+        inner = len(self._data.Item)
+        if inner == 0xFFFF:
+            # Full array. Start new one.
+            self._add_MultiVarData()
+            return self.storeDeltas(deltas, round=noRound)
+        self._data.addItem(deltas, round=noRound)
+
+        varIdx = (self._outer << 16) + inner
+        self._cache[deltas_tuple] = varIdx
+        return varIdx
+
+
+def MultiVarData_addItem(self, deltas, *, round=round):
+    deltas = tuple(round(d) for d in deltas)
+
+    assert len(deltas) == self.VarRegionCount
+
+    values = []
+    for d in deltas:
+        values.extend(d)
+
+    self.Item.append(values)
+    self.ItemCount = len(self.Item)
+
+
+ot.MultiVarData.addItem = MultiVarData_addItem
+
+
+def SparseVarRegion_get_support(self, fvar_axes):
+    return {
+        fvar_axes[reg.AxisIndex].axisTag: (reg.StartCoord, reg.PeakCoord, reg.EndCoord)
+        for reg in self.SparseVarRegionAxis
+    }
+
+
+ot.SparseVarRegion.get_support = SparseVarRegion_get_support
+
+
+def MultiVarStore___bool__(self):
+    return bool(self.MultiVarData)
+
+
+ot.MultiVarStore.__bool__ = MultiVarStore___bool__
+
+
+class MultiVarStoreInstancer(object):
+    def __init__(self, multivarstore, fvar_axes, location={}):
+        self.fvar_axes = fvar_axes
+        assert multivarstore is None or multivarstore.Format == 1
+        self._varData = multivarstore.MultiVarData if multivarstore else []
+        self._regions = (
+            multivarstore.SparseVarRegionList.Region if multivarstore else []
+        )
+        self.setLocation(location)
+
+    def setLocation(self, location):
+        self.location = dict(location)
+        self._clearCaches()
+
+    def _clearCaches(self):
+        self._scalars = {}
+
+    def _getScalar(self, regionIdx):
+        scalar = self._scalars.get(regionIdx)
+        if scalar is None:
+            support = self._regions[regionIdx].get_support(self.fvar_axes)
+            scalar = supportScalar(self.location, support)
+            self._scalars[regionIdx] = scalar
+        return scalar
+
+    @staticmethod
+    def interpolateFromDeltasAndScalars(deltas, scalars):
+        if not deltas:
+            return Vector([])
+        assert len(deltas) % len(scalars) == 0, (len(deltas), len(scalars))
+        m = len(deltas) // len(scalars)
+        delta = Vector([0] * m)
+        for d, s in zip(batched(deltas, m), scalars):
+            if not s:
+                continue
+            delta += Vector(d) * s
+        return delta
+
+    def __getitem__(self, varidx):
+        major, minor = varidx >> 16, varidx & 0xFFFF
+        if varidx == NO_VARIATION_INDEX:
+            return Vector([])
+        varData = self._varData
+        scalars = [self._getScalar(ri) for ri in varData[major].VarRegionIndex]
+        deltas = varData[major].Item[minor]
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+    def interpolateFromDeltas(self, varDataIndex, deltas):
+        varData = self._varData
+        scalars = [self._getScalar(ri) for ri in varData[varDataIndex].VarRegionIndex]
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+
+def MultiVarStore_subset_varidxes(self, varIdxes):
+    return ot.VarStore.subset_varidxes(self, varIdxes, VarData="MultiVarData")
+
+
+def MultiVarStore_prune_regions(self):
+    return ot.VarStore.prune_regions(
+        self, VarData="MultiVarData", VarRegionList="SparseVarRegionList"
+    )
+
+
+ot.MultiVarStore.prune_regions = MultiVarStore_prune_regions
+ot.MultiVarStore.subset_varidxes = MultiVarStore_subset_varidxes
+
+
+def MultiVarStore_get_supports(self, major, fvarAxes):
+    supports = []
+    varData = self.MultiVarData[major]
+    for regionIdx in varData.VarRegionIndex:
+        region = self.SparseVarRegionList.Region[regionIdx]
+        support = region.get_support(fvarAxes)
+        supports.append(support)
+    return supports
+
+
+ot.MultiVarStore.get_supports = MultiVarStore_get_supports
+
+
+def VARC_collect_varidxes(self, varidxes):
+    for glyph in self.VarCompositeGlyphs.VarCompositeGlyph:
+        for component in glyph.components:
+            varidxes.add(component.axisValuesVarIndex)
+            varidxes.add(component.transformVarIndex)
+
+
+def VARC_remap_varidxes(self, varidxes_map):
+    for glyph in self.VarCompositeGlyphs.VarCompositeGlyph:
+        for component in glyph.components:
+            component.axisValuesVarIndex = varidxes_map[component.axisValuesVarIndex]
+            component.transformVarIndex = varidxes_map[component.transformVarIndex]
+
+
+ot.VARC.collect_varidxes = VARC_collect_varidxes
+ot.VARC.remap_varidxes = VARC_remap_varidxes

venv/lib/python3.12/site-packages/fontTools/varLib/mutator.py

@@ -0,0 +1,518 @@
+"""
+Instantiate a variation font.  Run, eg:
+
+.. code-block:: sh
+
+    $ fonttools varLib.mutator ./NotoSansArabic-VF.ttf wght=140 wdth=85
+"""
+
+from fontTools.misc.fixedTools import floatToFixedToFloat, floatToFixed
+from fontTools.misc.roundTools import otRound
+from fontTools.pens.boundsPen import BoundsPen
+from fontTools.ttLib import TTFont, newTable
+from fontTools.ttLib.tables import ttProgram
+from fontTools.ttLib.tables._g_l_y_f import (
+    GlyphCoordinates,
+    flagOverlapSimple,
+    OVERLAP_COMPOUND,
+)
+from fontTools.varLib.models import (
+    supportScalar,
+    normalizeLocation,
+    piecewiseLinearMap,
+)
+from fontTools.varLib.merger import MutatorMerger
+from fontTools.varLib.varStore import VarStoreInstancer
+from fontTools.varLib.mvar import MVAR_ENTRIES
+from fontTools.varLib.iup import iup_delta
+import fontTools.subset.cff
+import os.path
+import logging
+from io import BytesIO
+
+
+log = logging.getLogger("fontTools.varlib.mutator")
+
+# map 'wdth' axis (1..200) to OS/2.usWidthClass (1..9), rounding to closest
+OS2_WIDTH_CLASS_VALUES = {}
+percents = [50.0, 62.5, 75.0, 87.5, 100.0, 112.5, 125.0, 150.0, 200.0]
+for i, (prev, curr) in enumerate(zip(percents[:-1], percents[1:]), start=1):
+    half = (prev + curr) / 2
+    OS2_WIDTH_CLASS_VALUES[half] = i
+
+
+def interpolate_cff2_PrivateDict(topDict, interpolateFromDeltas):
+    pd_blend_lists = (
+        "BlueValues",
+        "OtherBlues",
+        "FamilyBlues",
+        "FamilyOtherBlues",
+        "StemSnapH",
+        "StemSnapV",
+    )
+    pd_blend_values = ("BlueScale", "BlueShift", "BlueFuzz", "StdHW", "StdVW")
+    for fontDict in topDict.FDArray:
+        pd = fontDict.Private
+        vsindex = pd.vsindex if (hasattr(pd, "vsindex")) else 0
+        for key, value in pd.rawDict.items():
+            if (key in pd_blend_values) and isinstance(value, list):
+                delta = interpolateFromDeltas(vsindex, value[1:])
+                pd.rawDict[key] = otRound(value[0] + delta)
+            elif (key in pd_blend_lists) and isinstance(value[0], list):
+                """If any argument in a BlueValues list is a blend list,
+                then they all are. The first value of each list is an
+                absolute value. The delta tuples are calculated from
+                relative master values, hence we need to append all the
+                deltas to date to each successive absolute value."""
+                delta = 0
+                for i, val_list in enumerate(value):
+                    delta += otRound(interpolateFromDeltas(vsindex, val_list[1:]))
+                    value[i] = val_list[0] + delta
+
+
+def interpolate_cff2_charstrings(topDict, interpolateFromDeltas, glyphOrder):
+    charstrings = topDict.CharStrings
+    for gname in glyphOrder:
+        # Interpolate charstring
+        # e.g replace blend op args with regular args,
+        # and use and discard vsindex op.
+        charstring = charstrings[gname]
+        new_program = []
+        vsindex = 0
+        last_i = 0
+        for i, token in enumerate(charstring.program):
+            if token == "vsindex":
+                vsindex = charstring.program[i - 1]
+                if last_i != 0:
+                    new_program.extend(charstring.program[last_i : i - 1])
+                last_i = i + 1
+            elif token == "blend":
+                num_regions = charstring.getNumRegions(vsindex)
+                numMasters = 1 + num_regions
+                num_args = charstring.program[i - 1]
+                # The program list starting at program[i] is now:
+                # ..args for following operations
+                # num_args values  from the default font
+                # num_args tuples, each with numMasters-1 delta values
+                # num_blend_args
+                # 'blend'
+                argi = i - (num_args * numMasters + 1)
+                end_args = tuplei = argi + num_args
+                while argi < end_args:
+                    next_ti = tuplei + num_regions
+                    deltas = charstring.program[tuplei:next_ti]
+                    delta = interpolateFromDeltas(vsindex, deltas)
+                    charstring.program[argi] += otRound(delta)
+                    tuplei = next_ti
+                    argi += 1
+                new_program.extend(charstring.program[last_i:end_args])
+                last_i = i + 1
+        if last_i != 0:
+            new_program.extend(charstring.program[last_i:])
+            charstring.program = new_program
+
+
+def interpolate_cff2_metrics(varfont, topDict, glyphOrder, loc):
+    """Unlike TrueType glyphs, neither advance width nor bounding box
+    info is stored in a CFF2 charstring. The width data exists only in
+    the hmtx and HVAR tables. Since LSB data cannot be interpolated
+    reliably from the master LSB values in the hmtx table, we traverse
+    the charstring to determine the actual bound box."""
+
+    charstrings = topDict.CharStrings
+    boundsPen = BoundsPen(glyphOrder)
+    hmtx = varfont["hmtx"]
+    hvar_table = None
+    if "HVAR" in varfont:
+        hvar_table = varfont["HVAR"].table
+        fvar = varfont["fvar"]
+        varStoreInstancer = VarStoreInstancer(hvar_table.VarStore, fvar.axes, loc)
+
+    for gid, gname in enumerate(glyphOrder):
+        entry = list(hmtx[gname])
+        # get width delta.
+        if hvar_table:
+            if hvar_table.AdvWidthMap:
+                width_idx = hvar_table.AdvWidthMap.mapping[gname]
+            else:
+                width_idx = gid
+            width_delta = otRound(varStoreInstancer[width_idx])
+        else:
+            width_delta = 0
+
+        # get LSB.
+        boundsPen.init()
+        charstring = charstrings[gname]
+        charstring.draw(boundsPen)
+        if boundsPen.bounds is None:
+            # Happens with non-marking glyphs
+            lsb_delta = 0
+        else:
+            lsb = otRound(boundsPen.bounds[0])
+            lsb_delta = entry[1] - lsb
+
+        if lsb_delta or width_delta:
+            if width_delta:
+                entry[0] = max(0, entry[0] + width_delta)
+            if lsb_delta:
+                entry[1] = lsb
+            hmtx[gname] = tuple(entry)
+
+
+def instantiateVariableFont(varfont, location, inplace=False, overlap=True):
+    """Generate a static instance from a variable TTFont and a dictionary
+    defining the desired location along the variable font's axes.
+    The location values must be specified as user-space coordinates, e.g.:
+
+    .. code-block::
+
+        {'wght': 400, 'wdth': 100}
+
+    By default, a new TTFont object is returned. If ``inplace`` is True, the
+    input varfont is modified and reduced to a static font.
+
+    When the overlap parameter is defined as True,
+    OVERLAP_SIMPLE and OVERLAP_COMPOUND bits are set to 1.  See
+    https://docs.microsoft.com/en-us/typography/opentype/spec/glyf
+    """
+    if not inplace:
+        # make a copy to leave input varfont unmodified
+        stream = BytesIO()
+        varfont.save(stream)
+        stream.seek(0)
+        varfont = TTFont(stream)
+
+    fvar = varfont["fvar"]
+    axes = {a.axisTag: (a.minValue, a.defaultValue, a.maxValue) for a in fvar.axes}
+    loc = normalizeLocation(location, axes)
+    if "avar" in varfont:
+        maps = varfont["avar"].segments
+        loc = {k: piecewiseLinearMap(v, maps[k]) for k, v in loc.items()}
+    # Quantize to F2Dot14, to avoid surprise interpolations.
+    loc = {k: floatToFixedToFloat(v, 14) for k, v in loc.items()}
+    # Location is normalized now
+    log.info("Normalized location: %s", loc)
+
+    if "gvar" in varfont:
+        log.info("Mutating glyf/gvar tables")
+        gvar = varfont["gvar"]
+        glyf = varfont["glyf"]
+        hMetrics = varfont["hmtx"].metrics
+        vMetrics = getattr(varfont.get("vmtx"), "metrics", None)
+        # get list of glyph names in gvar sorted by component depth
+        glyphnames = sorted(
+            gvar.variations.keys(),
+            key=lambda name: (
+                (
+                    glyf[name].getCompositeMaxpValues(glyf).maxComponentDepth
+                    if glyf[name].isComposite()
+                    else 0
+                ),
+                name,
+            ),
+        )
+        for glyphname in glyphnames:
+            variations = gvar.variations[glyphname]
+            coordinates, _ = glyf._getCoordinatesAndControls(
+                glyphname, hMetrics, vMetrics
+            )
+            origCoords, endPts = None, None
+            for var in variations:
+                scalar = supportScalar(loc, var.axes)
+                if not scalar:
+                    continue
+                delta = var.coordinates
+                if None in delta:
+                    if origCoords is None:
+                        origCoords, g = glyf._getCoordinatesAndControls(
+                            glyphname, hMetrics, vMetrics
+                        )
+                    delta = iup_delta(delta, origCoords, g.endPts)
+                coordinates += GlyphCoordinates(delta) * scalar
+            glyf._setCoordinates(glyphname, coordinates, hMetrics, vMetrics)
+    else:
+        glyf = None
+
+    if "DSIG" in varfont:
+        del varfont["DSIG"]
+
+    if "cvar" in varfont:
+        log.info("Mutating cvt/cvar tables")
+        cvar = varfont["cvar"]
+        cvt = varfont["cvt "]
+        deltas = {}
+        for var in cvar.variations:
+            scalar = supportScalar(loc, var.axes)
+            if not scalar:
+                continue
+            for i, c in enumerate(var.coordinates):
+                if c is not None:
+                    deltas[i] = deltas.get(i, 0) + scalar * c
+        for i, delta in deltas.items():
+            cvt[i] += otRound(delta)
+
+    if "CFF2" in varfont:
+        log.info("Mutating CFF2 table")
+        glyphOrder = varfont.getGlyphOrder()
+        CFF2 = varfont["CFF2"]
+        topDict = CFF2.cff.topDictIndex[0]
+        vsInstancer = VarStoreInstancer(topDict.VarStore.otVarStore, fvar.axes, loc)
+        interpolateFromDeltas = vsInstancer.interpolateFromDeltas
+        interpolate_cff2_PrivateDict(topDict, interpolateFromDeltas)
+        CFF2.desubroutinize()
+        interpolate_cff2_charstrings(topDict, interpolateFromDeltas, glyphOrder)
+        interpolate_cff2_metrics(varfont, topDict, glyphOrder, loc)
+        del topDict.rawDict["VarStore"]
+        del topDict.VarStore
+
+    if "MVAR" in varfont:
+        log.info("Mutating MVAR table")
+        mvar = varfont["MVAR"].table
+        varStoreInstancer = VarStoreInstancer(mvar.VarStore, fvar.axes, loc)
+        records = mvar.ValueRecord
+        for rec in records:
+            mvarTag = rec.ValueTag
+            if mvarTag not in MVAR_ENTRIES:
+                continue
+            tableTag, itemName = MVAR_ENTRIES[mvarTag]
+            delta = otRound(varStoreInstancer[rec.VarIdx])
+            if not delta:
+                continue
+            setattr(
+                varfont[tableTag],
+                itemName,
+                getattr(varfont[tableTag], itemName) + delta,
+            )
+
+    log.info("Mutating FeatureVariations")
+    for tableTag in "GSUB", "GPOS":
+        if not tableTag in varfont:
+            continue
+        table = varfont[tableTag].table
+        if not getattr(table, "FeatureVariations", None):
+            continue
+        variations = table.FeatureVariations
+        for record in variations.FeatureVariationRecord:
+            applies = True
+            for condition in record.ConditionSet.ConditionTable:
+                if condition.Format == 1:
+                    axisIdx = condition.AxisIndex
+                    axisTag = fvar.axes[axisIdx].axisTag
+                    Min = condition.FilterRangeMinValue
+                    Max = condition.FilterRangeMaxValue
+                    v = loc[axisTag]
+                    if not (Min <= v <= Max):
+                        applies = False
+                else:
+                    applies = False
+                if not applies:
+                    break
+
+            if applies:
+                assert record.FeatureTableSubstitution.Version == 0x00010000
+                for rec in record.FeatureTableSubstitution.SubstitutionRecord:
+                    table.FeatureList.FeatureRecord[rec.FeatureIndex].Feature = (
+                        rec.Feature
+                    )
+                break
+        del table.FeatureVariations
+
+    if "GDEF" in varfont and varfont["GDEF"].table.Version >= 0x00010003:
+        log.info("Mutating GDEF/GPOS/GSUB tables")
+        gdef = varfont["GDEF"].table
+        instancer = VarStoreInstancer(gdef.VarStore, fvar.axes, loc)
+
+        merger = MutatorMerger(varfont, instancer)
+        merger.mergeTables(varfont, [varfont], ["GDEF", "GPOS"])
+
+        # Downgrade GDEF.
+        del gdef.VarStore
+        gdef.Version = 0x00010002
+        if gdef.MarkGlyphSetsDef is None:
+            del gdef.MarkGlyphSetsDef
+            gdef.Version = 0x00010000
+
+        if not (
+            gdef.LigCaretList
+            or gdef.MarkAttachClassDef
+            or gdef.GlyphClassDef
+            or gdef.AttachList
+            or (gdef.Version >= 0x00010002 and gdef.MarkGlyphSetsDef)
+        ):
+            del varfont["GDEF"]
+
+    addidef = False
+    if glyf:
+        for glyph in glyf.glyphs.values():
+            if hasattr(glyph, "program"):
+                instructions = glyph.program.getAssembly()
+                # If GETVARIATION opcode is used in bytecode of any glyph add IDEF
+                addidef = any(op.startswith("GETVARIATION") for op in instructions)
+                if addidef:
+                    break
+        if overlap:
+            for glyph_name in glyf.keys():
+                glyph = glyf[glyph_name]
+                # Set OVERLAP_COMPOUND bit for compound glyphs
+                if glyph.isComposite():
+                    glyph.components[0].flags |= OVERLAP_COMPOUND
+                # Set OVERLAP_SIMPLE bit for simple glyphs
+                elif glyph.numberOfContours > 0:
+                    glyph.flags[0] |= flagOverlapSimple
+    if addidef:
+        log.info("Adding IDEF to fpgm table for GETVARIATION opcode")
+        asm = []
+        if "fpgm" in varfont:
+            fpgm = varfont["fpgm"]
+            asm = fpgm.program.getAssembly()
+        else:
+            fpgm = newTable("fpgm")
+            fpgm.program = ttProgram.Program()
+            varfont["fpgm"] = fpgm
+        asm.append("PUSHB[000] 145")
+        asm.append("IDEF[ ]")
+        args = [str(len(loc))]
+        for a in fvar.axes:
+            args.append(str(floatToFixed(loc[a.axisTag], 14)))
+        asm.append("NPUSHW[ ] " + " ".join(args))
+        asm.append("ENDF[ ]")
+        fpgm.program.fromAssembly(asm)
+
+        # Change maxp attributes as IDEF is added
+        if "maxp" in varfont:
+            maxp = varfont["maxp"]
+            setattr(
+                maxp, "maxInstructionDefs", 1 + getattr(maxp, "maxInstructionDefs", 0)
+            )
+            setattr(
+                maxp,
+                "maxStackElements",
+                max(len(loc), getattr(maxp, "maxStackElements", 0)),
+            )
+
+    if "name" in varfont:
+        log.info("Pruning name table")
+        exclude = {a.axisNameID for a in fvar.axes}
+        for i in fvar.instances:
+            exclude.add(i.subfamilyNameID)
+            exclude.add(i.postscriptNameID)
+        if "ltag" in varfont:
+            # Drop the whole 'ltag' table if all its language tags are referenced by
+            # name records to be pruned.
+            # TODO: prune unused ltag tags and re-enumerate langIDs accordingly
+            excludedUnicodeLangIDs = [
+                n.langID
+                for n in varfont["name"].names
+                if n.nameID in exclude and n.platformID == 0 and n.langID != 0xFFFF
+            ]
+            if set(excludedUnicodeLangIDs) == set(range(len((varfont["ltag"].tags)))):
+                del varfont["ltag"]
+        varfont["name"].names[:] = [
+            n
+            for n in varfont["name"].names
+            if n.nameID < 256 or n.nameID not in exclude
+        ]
+
+    if "wght" in location and "OS/2" in varfont:
+        varfont["OS/2"].usWeightClass = otRound(max(1, min(location["wght"], 1000)))
+    if "wdth" in location:
+        wdth = location["wdth"]
+        for percent, widthClass in sorted(OS2_WIDTH_CLASS_VALUES.items()):
+            if wdth < percent:
+                varfont["OS/2"].usWidthClass = widthClass
+                break
+        else:
+            varfont["OS/2"].usWidthClass = 9
+    if "slnt" in location and "post" in varfont:
+        varfont["post"].italicAngle = max(-90, min(location["slnt"], 90))
+
+    log.info("Removing variable tables")
+    for tag in ("avar", "cvar", "fvar", "gvar", "HVAR", "MVAR", "VVAR", "STAT"):
+        if tag in varfont:
+            del varfont[tag]
+
+    return varfont
+
+
+def main(args=None):
+    """Instantiate a variation font"""
+    from fontTools import configLogger
+    import argparse
+
+    parser = argparse.ArgumentParser(
+        "fonttools varLib.mutator", description="Instantiate a variable font"
+    )
+    parser.add_argument("input", metavar="INPUT.ttf", help="Input variable TTF file.")
+    parser.add_argument(
+        "locargs",
+        metavar="AXIS=LOC",
+        nargs="*",
+        help="List of space separated locations. A location consist in "
+        "the name of a variation axis, followed by '=' and a number. E.g.: "
+        " wght=700 wdth=80. The default is the location of the base master.",
+    )
+    parser.add_argument(
+        "-o",
+        "--output",
+        metavar="OUTPUT.ttf",
+        default=None,
+        help="Output instance TTF file (default: INPUT-instance.ttf).",
+    )
+    parser.add_argument(
+        "--no-recalc-timestamp",
+        dest="recalc_timestamp",
+        action="store_false",
+        help="Don't set the output font's timestamp to the current time.",
+    )
+    logging_group = parser.add_mutually_exclusive_group(required=False)
+    logging_group.add_argument(
+        "-v", "--verbose", action="store_true", help="Run more verbosely."
+    )
+    logging_group.add_argument(
+        "-q", "--quiet", action="store_true", help="Turn verbosity off."
+    )
+    parser.add_argument(
+        "--no-overlap",
+        dest="overlap",
+        action="store_false",
+        help="Don't set OVERLAP_SIMPLE/OVERLAP_COMPOUND glyf flags.",
+    )
+    options = parser.parse_args(args)
+
+    varfilename = options.input
+    outfile = (
+        os.path.splitext(varfilename)[0] + "-instance.ttf"
+        if not options.output
+        else options.output
+    )
+    configLogger(
+        level=("DEBUG" if options.verbose else "ERROR" if options.quiet else "INFO")
+    )
+
+    loc = {}
+    for arg in options.locargs:
+        try:
+            tag, val = arg.split("=")
+            assert len(tag) <= 4
+            loc[tag.ljust(4)] = float(val)
+        except (ValueError, AssertionError):
+            parser.error("invalid location argument format: %r" % arg)
+    log.info("Location: %s", loc)
+
+    log.info("Loading variable font")
+    varfont = TTFont(varfilename, recalcTimestamp=options.recalc_timestamp)
+
+    instantiateVariableFont(varfont, loc, inplace=True, overlap=options.overlap)
+
+    log.info("Saving instance font %s", outfile)
+    varfont.save(outfile)
+
+
+if __name__ == "__main__":
+    import sys
+
+    if len(sys.argv) > 1:
+        sys.exit(main())
+    import doctest
+
+    sys.exit(doctest.testmod().failed)

venv/lib/python3.12/site-packages/fontTools/varLib/mvar.py

@@ -0,0 +1,40 @@
+MVAR_ENTRIES = {
+    "hasc": ("OS/2", "sTypoAscender"),  # horizontal ascender
+    "hdsc": ("OS/2", "sTypoDescender"),  # horizontal descender
+    "hlgp": ("OS/2", "sTypoLineGap"),  # horizontal line gap
+    "hcla": ("OS/2", "usWinAscent"),  # horizontal clipping ascent
+    "hcld": ("OS/2", "usWinDescent"),  # horizontal clipping descent
+    "vasc": ("vhea", "ascent"),  # vertical ascender
+    "vdsc": ("vhea", "descent"),  # vertical descender
+    "vlgp": ("vhea", "lineGap"),  # vertical line gap
+    "hcrs": ("hhea", "caretSlopeRise"),  # horizontal caret rise
+    "hcrn": ("hhea", "caretSlopeRun"),  # horizontal caret run
+    "hcof": ("hhea", "caretOffset"),  # horizontal caret offset
+    "vcrs": ("vhea", "caretSlopeRise"),  # vertical caret rise
+    "vcrn": ("vhea", "caretSlopeRun"),  # vertical caret run
+    "vcof": ("vhea", "caretOffset"),  # vertical caret offset
+    "xhgt": ("OS/2", "sxHeight"),  # x height
+    "cpht": ("OS/2", "sCapHeight"),  # cap height
+    "sbxs": ("OS/2", "ySubscriptXSize"),  # subscript em x size
+    "sbys": ("OS/2", "ySubscriptYSize"),  # subscript em y size
+    "sbxo": ("OS/2", "ySubscriptXOffset"),  # subscript em x offset
+    "sbyo": ("OS/2", "ySubscriptYOffset"),  # subscript em y offset
+    "spxs": ("OS/2", "ySuperscriptXSize"),  # superscript em x size
+    "spys": ("OS/2", "ySuperscriptYSize"),  # superscript em y size
+    "spxo": ("OS/2", "ySuperscriptXOffset"),  # superscript em x offset
+    "spyo": ("OS/2", "ySuperscriptYOffset"),  # superscript em y offset
+    "strs": ("OS/2", "yStrikeoutSize"),  # strikeout size
+    "stro": ("OS/2", "yStrikeoutPosition"),  # strikeout offset
+    "unds": ("post", "underlineThickness"),  # underline size
+    "undo": ("post", "underlinePosition"),  # underline offset
+    #'gsp0': ('gasp', 'gaspRange[0].rangeMaxPPEM'),	 # gaspRange[0]
+    #'gsp1': ('gasp', 'gaspRange[1].rangeMaxPPEM'),	 # gaspRange[1]
+    #'gsp2': ('gasp', 'gaspRange[2].rangeMaxPPEM'),	 # gaspRange[2]
+    #'gsp3': ('gasp', 'gaspRange[3].rangeMaxPPEM'),	 # gaspRange[3]
+    #'gsp4': ('gasp', 'gaspRange[4].rangeMaxPPEM'),	 # gaspRange[4]
+    #'gsp5': ('gasp', 'gaspRange[5].rangeMaxPPEM'),	 # gaspRange[5]
+    #'gsp6': ('gasp', 'gaspRange[6].rangeMaxPPEM'),	 # gaspRange[6]
+    #'gsp7': ('gasp', 'gaspRange[7].rangeMaxPPEM'),	 # gaspRange[7]
+    #'gsp8': ('gasp', 'gaspRange[8].rangeMaxPPEM'),	 # gaspRange[8]
+    #'gsp9': ('gasp', 'gaspRange[9].rangeMaxPPEM'),	 # gaspRange[9]
+}

venv/lib/python3.12/site-packages/fontTools/varLib/plot.py

@@ -0,0 +1,238 @@
+"""Visualize DesignSpaceDocument and resulting VariationModel."""
+
+from fontTools.varLib.models import VariationModel, supportScalar
+from fontTools.designspaceLib import DesignSpaceDocument
+from matplotlib import pyplot
+from mpl_toolkits.mplot3d import axes3d
+from itertools import cycle
+import math
+import logging
+import sys
+
+log = logging.getLogger(__name__)
+
+
+def stops(support, count=10):
+    a, b, c = support
+
+    return (
+        [a + (b - a) * i / count for i in range(count)]
+        + [b + (c - b) * i / count for i in range(count)]
+        + [c]
+    )
+
+
+def _plotLocationsDots(locations, axes, subplot, **kwargs):
+    for loc, color in zip(locations, cycle(pyplot.cm.Set1.colors)):
+        if len(axes) == 1:
+            subplot.plot([loc.get(axes[0], 0)], [1.0], "o", color=color, **kwargs)
+        elif len(axes) == 2:
+            subplot.plot(
+                [loc.get(axes[0], 0)],
+                [loc.get(axes[1], 0)],
+                [1.0],
+                "o",
+                color=color,
+                **kwargs,
+            )
+        else:
+            raise AssertionError(len(axes))
+
+
+def plotLocations(locations, fig, names=None, **kwargs):
+    n = len(locations)
+    cols = math.ceil(n**0.5)
+    rows = math.ceil(n / cols)
+
+    if names is None:
+        names = [None] * len(locations)
+
+    model = VariationModel(locations)
+    names = [names[model.reverseMapping[i]] for i in range(len(names))]
+
+    axes = sorted(locations[0].keys())
+    if len(axes) == 1:
+        _plotLocations2D(model, axes[0], fig, cols, rows, names=names, **kwargs)
+    elif len(axes) == 2:
+        _plotLocations3D(model, axes, fig, cols, rows, names=names, **kwargs)
+    else:
+        raise ValueError("Only 1 or 2 axes are supported")
+
+
+def _plotLocations2D(model, axis, fig, cols, rows, names, **kwargs):
+    subplot = fig.add_subplot(111)
+    for i, (support, color, name) in enumerate(
+        zip(model.supports, cycle(pyplot.cm.Set1.colors), cycle(names))
+    ):
+        if name is not None:
+            subplot.set_title(name)
+        subplot.set_xlabel(axis)
+        pyplot.xlim(-1.0, +1.0)
+
+        Xs = support.get(axis, (-1.0, 0.0, +1.0))
+        X, Y = [], []
+        for x in stops(Xs):
+            y = supportScalar({axis: x}, support)
+            X.append(x)
+            Y.append(y)
+        subplot.plot(X, Y, color=color, **kwargs)
+
+        _plotLocationsDots(model.locations, [axis], subplot)
+
+
+def _plotLocations3D(model, axes, fig, rows, cols, names, **kwargs):
+    ax1, ax2 = axes
+
+    axis3D = fig.add_subplot(111, projection="3d")
+    for i, (support, color, name) in enumerate(
+        zip(model.supports, cycle(pyplot.cm.Set1.colors), cycle(names))
+    ):
+        if name is not None:
+            axis3D.set_title(name)
+        axis3D.set_xlabel(ax1)
+        axis3D.set_ylabel(ax2)
+        pyplot.xlim(-1.0, +1.0)
+        pyplot.ylim(-1.0, +1.0)
+
+        Xs = support.get(ax1, (-1.0, 0.0, +1.0))
+        Ys = support.get(ax2, (-1.0, 0.0, +1.0))
+        for x in stops(Xs):
+            X, Y, Z = [], [], []
+            for y in Ys:
+                z = supportScalar({ax1: x, ax2: y}, support)
+                X.append(x)
+                Y.append(y)
+                Z.append(z)
+            axis3D.plot(X, Y, Z, color=color, **kwargs)
+        for y in stops(Ys):
+            X, Y, Z = [], [], []
+            for x in Xs:
+                z = supportScalar({ax1: x, ax2: y}, support)
+                X.append(x)
+                Y.append(y)
+                Z.append(z)
+            axis3D.plot(X, Y, Z, color=color, **kwargs)
+
+        _plotLocationsDots(model.locations, [ax1, ax2], axis3D)
+
+
+def plotDocument(doc, fig, **kwargs):
+    doc.normalize()
+    locations = [s.location for s in doc.sources]
+    names = [s.name for s in doc.sources]
+    plotLocations(locations, fig, names, **kwargs)
+
+
+def _plotModelFromMasters2D(model, masterValues, fig, **kwargs):
+    assert len(model.axisOrder) == 1
+    axis = model.axisOrder[0]
+
+    axis_min = min(loc.get(axis, 0) for loc in model.locations)
+    axis_max = max(loc.get(axis, 0) for loc in model.locations)
+
+    import numpy as np
+
+    X = np.arange(axis_min, axis_max, (axis_max - axis_min) / 100)
+    Y = []
+
+    for x in X:
+        loc = {axis: x}
+        v = model.interpolateFromMasters(loc, masterValues)
+        Y.append(v)
+
+    subplot = fig.add_subplot(111)
+    subplot.plot(X, Y, "-", **kwargs)
+
+
+def _plotModelFromMasters3D(model, masterValues, fig, **kwargs):
+    assert len(model.axisOrder) == 2
+    axis1, axis2 = model.axisOrder[0], model.axisOrder[1]
+
+    axis1_min = min(loc.get(axis1, 0) for loc in model.locations)
+    axis1_max = max(loc.get(axis1, 0) for loc in model.locations)
+    axis2_min = min(loc.get(axis2, 0) for loc in model.locations)
+    axis2_max = max(loc.get(axis2, 0) for loc in model.locations)
+
+    import numpy as np
+
+    X = np.arange(axis1_min, axis1_max, (axis1_max - axis1_min) / 100)
+    Y = np.arange(axis2_min, axis2_max, (axis2_max - axis2_min) / 100)
+    X, Y = np.meshgrid(X, Y)
+    Z = []
+
+    for row_x, row_y in zip(X, Y):
+        z_row = []
+        Z.append(z_row)
+        for x, y in zip(row_x, row_y):
+            loc = {axis1: x, axis2: y}
+            v = model.interpolateFromMasters(loc, masterValues)
+            z_row.append(v)
+    Z = np.array(Z)
+
+    axis3D = fig.add_subplot(111, projection="3d")
+    axis3D.plot_surface(X, Y, Z, **kwargs)
+
+
+def plotModelFromMasters(model, masterValues, fig, **kwargs):
+    """Plot a variation model and set of master values corresponding
+    to the locations to the model into a pyplot figure.  Variation
+    model must have axisOrder of size 1 or 2."""
+    if len(model.axisOrder) == 1:
+        _plotModelFromMasters2D(model, masterValues, fig, **kwargs)
+    elif len(model.axisOrder) == 2:
+        _plotModelFromMasters3D(model, masterValues, fig, **kwargs)
+    else:
+        raise ValueError("Only 1 or 2 axes are supported")
+
+
+def main(args=None):
+    from fontTools import configLogger
+
+    if args is None:
+        args = sys.argv[1:]
+
+    # configure the library logger (for >= WARNING)
+    configLogger()
+    # comment this out to enable debug messages from logger
+    # log.setLevel(logging.DEBUG)
+
+    if len(args) < 1:
+        print("usage: fonttools varLib.plot source.designspace", file=sys.stderr)
+        print("  or")
+        print("usage: fonttools varLib.plot location1 location2 ...", file=sys.stderr)
+        print("  or")
+        print(
+            "usage: fonttools varLib.plot location1=value1 location2=value2 ...",
+            file=sys.stderr,
+        )
+        sys.exit(1)
+
+    fig = pyplot.figure()
+    fig.set_tight_layout(True)
+
+    if len(args) == 1 and args[0].endswith(".designspace"):
+        doc = DesignSpaceDocument()
+        doc.read(args[0])
+        plotDocument(doc, fig)
+    else:
+        axes = [chr(c) for c in range(ord("A"), ord("Z") + 1)]
+        if "=" not in args[0]:
+            locs = [dict(zip(axes, (float(v) for v in s.split(",")))) for s in args]
+            plotLocations(locs, fig)
+        else:
+            locations = []
+            masterValues = []
+            for arg in args:
+                loc, v = arg.split("=")
+                locations.append(dict(zip(axes, (float(v) for v in loc.split(",")))))
+                masterValues.append(float(v))
+            model = VariationModel(locations, axes[: len(locations[0])])
+            plotModelFromMasters(model, masterValues, fig)
+
+    pyplot.show()
+
+
+if __name__ == "__main__":
+    import sys
+
+    sys.exit(main())

venv/lib/python3.12/site-packages/fontTools/varLib/stat.py

@@ -0,0 +1,149 @@
+"""Extra methods for DesignSpaceDocument to generate its STAT table data."""
+
+from __future__ import annotations
+
+from typing import Dict, List, Union
+
+import fontTools.otlLib.builder
+from fontTools.designspaceLib import (
+    AxisLabelDescriptor,
+    DesignSpaceDocument,
+    DesignSpaceDocumentError,
+    LocationLabelDescriptor,
+)
+from fontTools.designspaceLib.types import Region, getVFUserRegion, locationInRegion
+from fontTools.ttLib import TTFont
+
+
+def buildVFStatTable(ttFont: TTFont, doc: DesignSpaceDocument, vfName: str) -> None:
+    """Build the STAT table for the variable font identified by its name in
+    the given document.
+
+    Knowing which variable we're building STAT data for is needed to subset
+    the STAT locations to only include what the variable font actually ships.
+
+    .. versionadded:: 5.0
+
+    .. seealso::
+        - :func:`getStatAxes()`
+        - :func:`getStatLocations()`
+        - :func:`fontTools.otlLib.builder.buildStatTable()`
+    """
+    for vf in doc.getVariableFonts():
+        if vf.name == vfName:
+            break
+    else:
+        raise DesignSpaceDocumentError(
+            f"Cannot find the variable font by name {vfName}"
+        )
+
+    region = getVFUserRegion(doc, vf)
+
+    # if there are not currently any mac names don't add them here, that's inconsistent
+    # https://github.com/fonttools/fonttools/issues/683
+    macNames = any(
+        nr.platformID == 1 for nr in getattr(ttFont.get("name"), "names", ())
+    )
+
+    return fontTools.otlLib.builder.buildStatTable(
+        ttFont,
+        getStatAxes(doc, region),
+        getStatLocations(doc, region),
+        doc.elidedFallbackName if doc.elidedFallbackName is not None else 2,
+        macNames=macNames,
+    )
+
+
+def getStatAxes(doc: DesignSpaceDocument, userRegion: Region) -> List[Dict]:
+    """Return a list of axis dicts suitable for use as the ``axes``
+    argument to :func:`fontTools.otlLib.builder.buildStatTable()`.
+
+    .. versionadded:: 5.0
+    """
+    # First, get the axis labels with explicit ordering
+    # then append the others in the order they appear.
+    maxOrdering = max(
+        (axis.axisOrdering for axis in doc.axes if axis.axisOrdering is not None),
+        default=-1,
+    )
+    axisOrderings = []
+    for axis in doc.axes:
+        if axis.axisOrdering is not None:
+            axisOrderings.append(axis.axisOrdering)
+        else:
+            maxOrdering += 1
+            axisOrderings.append(maxOrdering)
+    return [
+        dict(
+            tag=axis.tag,
+            name={"en": axis.name, **axis.labelNames},
+            ordering=ordering,
+            values=[
+                _axisLabelToStatLocation(label)
+                for label in axis.axisLabels
+                if locationInRegion({axis.name: label.userValue}, userRegion)
+            ],
+        )
+        for axis, ordering in zip(doc.axes, axisOrderings)
+    ]
+
+
+def getStatLocations(doc: DesignSpaceDocument, userRegion: Region) -> List[Dict]:
+    """Return a list of location dicts suitable for use as the ``locations``
+    argument to :func:`fontTools.otlLib.builder.buildStatTable()`.
+
+    .. versionadded:: 5.0
+    """
+    axesByName = {axis.name: axis for axis in doc.axes}
+    return [
+        dict(
+            name={"en": label.name, **label.labelNames},
+            # Location in the designspace is keyed by axis name
+            # Location in buildStatTable by axis tag
+            location={
+                axesByName[name].tag: value
+                for name, value in label.getFullUserLocation(doc).items()
+            },
+            flags=_labelToFlags(label),
+        )
+        for label in doc.locationLabels
+        if locationInRegion(label.getFullUserLocation(doc), userRegion)
+    ]
+
+
+def _labelToFlags(label: Union[AxisLabelDescriptor, LocationLabelDescriptor]) -> int:
+    flags = 0
+    if label.olderSibling:
+        flags |= 1
+    if label.elidable:
+        flags |= 2
+    return flags
+
+
+def _axisLabelToStatLocation(
+    label: AxisLabelDescriptor,
+) -> Dict:
+    label_format = label.getFormat()
+    name = {"en": label.name, **label.labelNames}
+    flags = _labelToFlags(label)
+    if label_format == 1:
+        return dict(name=name, value=label.userValue, flags=flags)
+    if label_format == 3:
+        return dict(
+            name=name,
+            value=label.userValue,
+            linkedValue=label.linkedUserValue,
+            flags=flags,
+        )
+    if label_format == 2:
+        res = dict(
+            name=name,
+            nominalValue=label.userValue,
+            flags=flags,
+        )
+        if label.userMinimum is not None:
+            res["rangeMinValue"] = label.userMinimum
+        if label.userMaximum is not None:
+            res["rangeMaxValue"] = label.userMaximum
+        return res
+    raise NotImplementedError("Unknown STAT label format")

venv/lib/python3.12/site-packages/fontTools/varLib/varStore.py

@@ -0,0 +1,767 @@
+from fontTools.misc.roundTools import noRound, otRound
+from fontTools.misc.intTools import bit_count
+from fontTools.ttLib.tables import otTables as ot
+from fontTools.varLib.models import supportScalar
+from fontTools.varLib.builder import (
+    buildVarRegionList,
+    buildVarStore,
+    buildVarRegion,
+    buildVarData,
+)
+from functools import partial
+from collections import defaultdict
+from heapq import heappush, heappop
+
+
+NO_VARIATION_INDEX = ot.NO_VARIATION_INDEX
+ot.VarStore.NO_VARIATION_INDEX = NO_VARIATION_INDEX
+
+
+def _getLocationKey(loc):
+    return tuple(sorted(loc.items(), key=lambda kv: kv[0]))
+
+
+class OnlineVarStoreBuilder(object):
+    def __init__(self, axisTags):
+        self._axisTags = axisTags
+        self._regionMap = {}
+        self._regionList = buildVarRegionList([], axisTags)
+        self._store = buildVarStore(self._regionList, [])
+        self._data = None
+        self._model = None
+        self._supports = None
+        self._varDataIndices = {}
+        self._varDataCaches = {}
+        self._cache = None
+
+    def setModel(self, model):
+        self.setSupports(model.supports)
+        self._model = model
+
+    def setSupports(self, supports):
+        self._model = None
+        self._supports = list(supports)
+        if not self._supports[0]:
+            del self._supports[0]  # Drop base master support
+        self._cache = None
+        self._data = None
+
+    def finish(self, optimize=True):
+        self._regionList.RegionCount = len(self._regionList.Region)
+        self._store.VarDataCount = len(self._store.VarData)
+        for data in self._store.VarData:
+            data.ItemCount = len(data.Item)
+            data.calculateNumShorts(optimize=optimize)
+        return self._store
+
+    def _add_VarData(self, num_items=1):
+        regionMap = self._regionMap
+        regionList = self._regionList
+
+        regions = self._supports
+        regionIndices = []
+        for region in regions:
+            key = _getLocationKey(region)
+            idx = regionMap.get(key)
+            if idx is None:
+                varRegion = buildVarRegion(region, self._axisTags)
+                idx = regionMap[key] = len(regionList.Region)
+                regionList.Region.append(varRegion)
+            regionIndices.append(idx)
+
+        # Check if we have one already...
+        key = tuple(regionIndices)
+        varDataIdx = self._varDataIndices.get(key)
+        if varDataIdx is not None:
+            self._outer = varDataIdx
+            self._data = self._store.VarData[varDataIdx]
+            self._cache = self._varDataCaches[key]
+            if len(self._data.Item) + num_items > 0xFFFF:
+                # This is full.  Need new one.
+                varDataIdx = None
+
+        if varDataIdx is None:
+            self._data = buildVarData(regionIndices, [], optimize=False)
+            self._outer = len(self._store.VarData)
+            self._store.VarData.append(self._data)
+            self._varDataIndices[key] = self._outer
+            if key not in self._varDataCaches:
+                self._varDataCaches[key] = {}
+            self._cache = self._varDataCaches[key]
+
+    def storeMasters(self, master_values, *, round=round):
+        deltas = self._model.getDeltas(master_values, round=round)
+        base = deltas.pop(0)
+        return base, self.storeDeltas(deltas, round=noRound)
+
+    def storeMastersMany(self, master_values_list, *, round=round):
+        deltas_list = [
+            self._model.getDeltas(master_values, round=round)
+            for master_values in master_values_list
+        ]
+        base_list = [deltas.pop(0) for deltas in deltas_list]
+        return base_list, self.storeDeltasMany(deltas_list, round=noRound)
+
+    def storeDeltas(self, deltas, *, round=round):
+        deltas = [round(d) for d in deltas]
+        if len(deltas) == len(self._supports) + 1:
+            deltas = tuple(deltas[1:])
+        else:
+            assert len(deltas) == len(self._supports)
+            deltas = tuple(deltas)
+
+        if not self._data:
+            self._add_VarData()
+
+        varIdx = self._cache.get(deltas)
+        if varIdx is not None:
+            return varIdx
+
+        inner = len(self._data.Item)
+        if inner == 0xFFFF:
+            # Full array. Start new one.
+            self._add_VarData()
+            return self.storeDeltas(deltas, round=noRound)
+        self._data.addItem(deltas, round=noRound)
+
+        varIdx = (self._outer << 16) + inner
+        self._cache[deltas] = varIdx
+        return varIdx
+
+    def storeDeltasMany(self, deltas_list, *, round=round):
+        deltas_list = [[round(d) for d in deltas] for deltas in deltas_list]
+        deltas_list = tuple(tuple(deltas) for deltas in deltas_list)
+
+        if not self._data:
+            self._add_VarData(len(deltas_list))
+
+        varIdx = self._cache.get(deltas_list)
+        if varIdx is not None:
+            return varIdx
+
+        inner = len(self._data.Item)
+        if inner + len(deltas_list) > 0xFFFF:
+            # Full array. Start new one.
+            self._add_VarData(len(deltas_list))
+            return self.storeDeltasMany(deltas_list, round=noRound)
+        for i, deltas in enumerate(deltas_list):
+            self._data.addItem(deltas, round=noRound)
+
+            varIdx = (self._outer << 16) + inner + i
+            self._cache[deltas] = varIdx
+
+        varIdx = (self._outer << 16) + inner
+        self._cache[deltas_list] = varIdx
+
+        return varIdx
+
+
+def VarData_addItem(self, deltas, *, round=round):
+    deltas = [round(d) for d in deltas]
+
+    countUs = self.VarRegionCount
+    countThem = len(deltas)
+    if countUs + 1 == countThem:
+        deltas = list(deltas[1:])
+    else:
+        assert countUs == countThem, (countUs, countThem)
+        deltas = list(deltas)
+    self.Item.append(deltas)
+    self.ItemCount = len(self.Item)
+
+
+ot.VarData.addItem = VarData_addItem
+
+
+def VarRegion_get_support(self, fvar_axes):
+    return {
+        fvar_axes[i].axisTag: (reg.StartCoord, reg.PeakCoord, reg.EndCoord)
+        for i, reg in enumerate(self.VarRegionAxis)
+        if reg.PeakCoord != 0
+    }
+
+
+ot.VarRegion.get_support = VarRegion_get_support
+
+
+def VarStore___bool__(self):
+    return bool(self.VarData)
+
+
+ot.VarStore.__bool__ = VarStore___bool__
+
+
+class VarStoreInstancer(object):
+    def __init__(self, varstore, fvar_axes, location={}):
+        self.fvar_axes = fvar_axes
+        assert varstore is None or varstore.Format == 1
+        self._varData = varstore.VarData if varstore else []
+        self._regions = varstore.VarRegionList.Region if varstore else []
+        self.setLocation(location)
+
+    def setLocation(self, location):
+        self.location = dict(location)
+        self._clearCaches()
+
+    def _clearCaches(self):
+        self._scalars = {}
+
+    def _getScalar(self, regionIdx):
+        scalar = self._scalars.get(regionIdx)
+        if scalar is None:
+            support = self._regions[regionIdx].get_support(self.fvar_axes)
+            scalar = supportScalar(self.location, support)
+            self._scalars[regionIdx] = scalar
+        return scalar
+
+    @staticmethod
+    def interpolateFromDeltasAndScalars(deltas, scalars):
+        delta = 0.0
+        for d, s in zip(deltas, scalars):
+            if not s:
+                continue
+            delta += d * s
+        return delta
+
+    def __getitem__(self, varidx):
+        major, minor = varidx >> 16, varidx & 0xFFFF
+        if varidx == NO_VARIATION_INDEX:
+            return 0.0
+        varData = self._varData
+        scalars = [self._getScalar(ri) for ri in varData[major].VarRegionIndex]
+        deltas = varData[major].Item[minor]
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+    def interpolateFromDeltas(self, varDataIndex, deltas):
+        varData = self._varData
+        scalars = [self._getScalar(ri) for ri in varData[varDataIndex].VarRegionIndex]
+        return self.interpolateFromDeltasAndScalars(deltas, scalars)
+
+
+#
+# Optimizations
+#
+# retainFirstMap - If true, major 0 mappings are retained. Deltas for unused indices are zeroed
+# advIdxes - Set of major 0 indices for advance deltas to be listed first. Other major 0 indices follow.
+
+
+def VarStore_subset_varidxes(
+    self,
+    varIdxes,
+    optimize=True,
+    retainFirstMap=False,
+    advIdxes=set(),
+    *,
+    VarData="VarData",
+):
+    # Sort out used varIdxes by major/minor.
+    used = defaultdict(set)
+    for varIdx in varIdxes:
+        if varIdx == NO_VARIATION_INDEX:
+            continue
+        major = varIdx >> 16
+        minor = varIdx & 0xFFFF
+        used[major].add(minor)
+    del varIdxes
+
+    #
+    # Subset VarData
+    #
+
+    varData = getattr(self, VarData)
+    newVarData = []
+    varDataMap = {NO_VARIATION_INDEX: NO_VARIATION_INDEX}
+    for major, data in enumerate(varData):
+        usedMinors = used.get(major)
+        if usedMinors is None:
+            continue
+        newMajor = len(newVarData)
+        newVarData.append(data)
+
+        items = data.Item
+        newItems = []
+        if major == 0 and retainFirstMap:
+            for minor in range(len(items)):
+                newItems.append(
+                    items[minor] if minor in usedMinors else [0] * len(items[minor])
+                )
+                varDataMap[minor] = minor
+        else:
+            if major == 0:
+                minors = sorted(advIdxes) + sorted(usedMinors - advIdxes)
+            else:
+                minors = sorted(usedMinors)
+            for minor in minors:
+                newMinor = len(newItems)
+                newItems.append(items[minor])
+                varDataMap[(major << 16) + minor] = (newMajor << 16) + newMinor
+
+        data.Item = newItems
+        data.ItemCount = len(data.Item)
+
+        if VarData == "VarData":
+            data.calculateNumShorts(optimize=optimize)
+
+    setattr(self, VarData, newVarData)
+    setattr(self, VarData + "Count", len(newVarData))
+
+    self.prune_regions()
+
+    return varDataMap
+
+
+ot.VarStore.subset_varidxes = VarStore_subset_varidxes
+
+
+def VarStore_prune_regions(self, *, VarData="VarData", VarRegionList="VarRegionList"):
+    """Remove unused VarRegions."""
+    #
+    # Subset VarRegionList
+    #
+
+    # Collect.
+    usedRegions = set()
+    for data in getattr(self, VarData):
+        usedRegions.update(data.VarRegionIndex)
+    # Subset.
+    regionList = getattr(self, VarRegionList)
+    regions = regionList.Region
+    newRegions = []
+    regionMap = {}
+    for i in sorted(usedRegions):
+        regionMap[i] = len(newRegions)
+        newRegions.append(regions[i])
+    regionList.Region = newRegions
+    regionList.RegionCount = len(regionList.Region)
+    # Map.
+    for data in getattr(self, VarData):
+        data.VarRegionIndex = [regionMap[i] for i in data.VarRegionIndex]
+
+
+ot.VarStore.prune_regions = VarStore_prune_regions
+
+
+def _visit(self, func):
+    """Recurse down from self, if type of an object is ot.Device,
+    call func() on it.  Works on otData-style classes."""
+
+    if type(self) == ot.Device:
+        func(self)
+
+    elif isinstance(self, list):
+        for that in self:
+            _visit(that, func)
+
+    elif hasattr(self, "getConverters") and not hasattr(self, "postRead"):
+        for conv in self.getConverters():
+            that = getattr(self, conv.name, None)
+            if that is not None:
+                _visit(that, func)
+
+    elif isinstance(self, ot.ValueRecord):
+        for that in self.__dict__.values():
+            _visit(that, func)
+
+
+def _Device_recordVarIdx(self, s):
+    """Add VarIdx in this Device table (if any) to the set s."""
+    if self.DeltaFormat == 0x8000:
+        s.add((self.StartSize << 16) + self.EndSize)
+
+
+def Object_collect_device_varidxes(self, varidxes):
+    adder = partial(_Device_recordVarIdx, s=varidxes)
+    _visit(self, adder)
+
+
+ot.GDEF.collect_device_varidxes = Object_collect_device_varidxes
+ot.GPOS.collect_device_varidxes = Object_collect_device_varidxes
+
+
+def _Device_mapVarIdx(self, mapping, done):
+    """Map VarIdx in this Device table (if any) through mapping."""
+    if id(self) in done:
+        return
+    done.add(id(self))
+    if self.DeltaFormat == 0x8000:
+        varIdx = mapping[(self.StartSize << 16) + self.EndSize]
+        self.StartSize = varIdx >> 16
+        self.EndSize = varIdx & 0xFFFF
+
+
+def Object_remap_device_varidxes(self, varidxes_map):
+    mapper = partial(_Device_mapVarIdx, mapping=varidxes_map, done=set())
+    _visit(self, mapper)
+
+
+ot.GDEF.remap_device_varidxes = Object_remap_device_varidxes
+ot.GPOS.remap_device_varidxes = Object_remap_device_varidxes
+
+
+class _Encoding(object):
+    def __init__(self, chars):
+        self.chars = chars
+        self.width = bit_count(chars)
+        self.columns = self._columns(chars)
+        self.overhead = self._characteristic_overhead(self.columns)
+        self.items = set()
+
+    def append(self, row):
+        self.items.add(row)
+
+    def extend(self, lst):
+        self.items.update(lst)
+
+    def get_room(self):
+        """Maximum number of bytes that can be added to characteristic
+        while still being beneficial to merge it into another one."""
+        count = len(self.items)
+        return max(0, (self.overhead - 1) // count - self.width)
+
+    room = property(get_room)
+
+    def get_gain(self):
+        """Maximum possible byte gain from merging this into another
+        characteristic."""
+        count = len(self.items)
+        return max(0, self.overhead - count)
+
+    gain = property(get_gain)
+
+    def gain_sort_key(self):
+        return self.gain, self.chars
+
+    def width_sort_key(self):
+        return self.width, self.chars
+
+    @staticmethod
+    def _characteristic_overhead(columns):
+        """Returns overhead in bytes of encoding this characteristic
+        as a VarData."""
+        c = 4 + 6  # 4 bytes for LOffset, 6 bytes for VarData header
+        c += bit_count(columns) * 2
+        return c
+
+    @staticmethod
+    def _columns(chars):
+        cols = 0
+        i = 1
+        while chars:
+            if chars & 0b1111:
+                cols |= i
+            chars >>= 4
+            i <<= 1
+        return cols
+
+    def gain_from_merging(self, other_encoding):
+        combined_chars = other_encoding.chars | self.chars
+        combined_width = bit_count(combined_chars)
+        combined_columns = self.columns | other_encoding.columns
+        combined_overhead = _Encoding._characteristic_overhead(combined_columns)
+        combined_gain = (
+            +self.overhead
+            + other_encoding.overhead
+            - combined_overhead
+            - (combined_width - self.width) * len(self.items)
+            - (combined_width - other_encoding.width) * len(other_encoding.items)
+        )
+        return combined_gain
+
+
+class _EncodingDict(dict):
+    def __missing__(self, chars):
+        r = self[chars] = _Encoding(chars)
+        return r
+
+    def add_row(self, row):
+        chars = self._row_characteristics(row)
+        self[chars].append(row)
+
+    @staticmethod
+    def _row_characteristics(row):
+        """Returns encoding characteristics for a row."""
+        longWords = False
+
+        chars = 0
+        i = 1
+        for v in row:
+            if v:
+                chars += i
+            if not (-128 <= v <= 127):
+                chars += i * 0b0010
+            if not (-32768 <= v <= 32767):
+                longWords = True
+                break
+            i <<= 4
+
+        if longWords:
+            # Redo; only allow 2byte/4byte encoding
+            chars = 0
+            i = 1
+            for v in row:
+                if v:
+                    chars += i * 0b0011
+                if not (-32768 <= v <= 32767):
+                    chars += i * 0b1100
+                i <<= 4
+
+        return chars
+
+
+def VarStore_optimize(self, use_NO_VARIATION_INDEX=True, quantization=1):
+    """Optimize storage. Returns mapping from old VarIdxes to new ones."""
+
+    # Overview:
+    #
+    # For each VarData row, we first extend it with zeroes to have
+    # one column per region in VarRegionList. We then group the
+    # rows into _Encoding objects, by their "characteristic" bitmap.
+    # The characteristic bitmap is a binary number representing how
+    # many bytes each column of the data takes up to encode. Each
+    # column is encoded in four bits. For example, if a column has
+    # only values in the range -128..127, it would only have a single
+    # bit set in the characteristic bitmap for that column. If it has
+    # values in the range -32768..32767, it would have two bits set.
+    # The number of ones in the characteristic bitmap is the "width"
+    # of the encoding.
+    #
+    # Each encoding as such has a number of "active" (ie. non-zero)
+    # columns. The overhead of encoding the characteristic bitmap
+    # is 10 bytes, plus 2 bytes per active column.
+    #
+    # When an encoding is merged into another one, if the characteristic
+    # of the old encoding is a subset of the new one, then the overhead
+    # of the old encoding is completely eliminated. However, each row
+    # now would require more bytes to encode, to the tune of one byte
+    # per characteristic bit that is active in the new encoding but not
+    # in the old one. The number of bits that can be added to an encoding
+    # while still beneficial to merge it into another encoding is called
+    # the "room" for that encoding.
+    #
+    # The "gain" of an encodings is the maximum number of bytes we can
+    # save by merging it into another encoding. The "gain" of merging
+    # two encodings is how many bytes we save by doing so.
+    #
+    # High-level algorithm:
+    #
+    # - Each encoding has a minimal way to encode it. However, because
+    #   of the overhead of encoding the characteristic bitmap, it may
+    #   be beneficial to merge two encodings together, if there is
+    #   gain in doing so. As such, we need to search for the best
+    #   such successive merges.
+    #
+    # Algorithm:
+    #
+    # - Put all encodings into a "todo" list.
+    #
+    # - Sort todo list by decreasing gain (for stability).
+    #
+    # - Make a priority-queue of the gain from combining each two
+    #   encodings in the todo list. The priority queue is sorted by
+    #   decreasing gain. Only positive gains are included.
+    #
+    # - While priority queue is not empty:
+    #   - Pop the first item from the priority queue,
+    #   - Merge the two encodings it represents,
+    #   - Remove the two encodings from the todo list,
+    #   - Insert positive gains from combining the new encoding with
+    #     all existing todo list items into the priority queue,
+    #   - If a todo list item with the same characteristic bitmap as
+    #     the new encoding exists, remove it from the todo list and
+    #     merge it into the new encoding.
+    #   - Insert the new encoding into the todo list,
+    #
+    # - Encode all remaining items in the todo list.
+    #
+    # The output is then sorted for stability, in the following way:
+    # - The VarRegionList of the input is kept intact.
+    # - All encodings are sorted before the main algorithm, by
+    #   gain_key_sort(), which is a tuple of the following items:
+    #   * The gain of the encoding.
+    #   * The characteristic bitmap of the encoding, with higher-numbered
+    #     columns compared first.
+    # - The VarData is sorted by width_sort_key(), which is a tuple
+    #   of the following items:
+    #   * The "width" of the encoding.
+    #   * The characteristic bitmap of the encoding, with higher-numbered
+    #     columns compared first.
+    # - Within each VarData, the items are sorted as vectors of numbers.
+    #
+    # Finally, each VarData is optimized to remove the empty columns and
+    # reorder columns as needed.
+
+    # TODO
+    # Check that no two VarRegions are the same; if they are, fold them.
+
+    n = len(self.VarRegionList.Region)  # Number of columns
+    zeroes = [0] * n
+
+    front_mapping = {}  # Map from old VarIdxes to full row tuples
+
+    encodings = _EncodingDict()
+
+    # Collect all items into a set of full rows (with lots of zeroes.)
+    for major, data in enumerate(self.VarData):
+        regionIndices = data.VarRegionIndex
+
+        for minor, item in enumerate(data.Item):
+            row = list(zeroes)
+
+            if quantization == 1:
+                for regionIdx, v in zip(regionIndices, item):
+                    row[regionIdx] += v
+            else:
+                for regionIdx, v in zip(regionIndices, item):
+                    row[regionIdx] += (
+                        round(v / quantization) * quantization
+                    )  # TODO https://github.com/fonttools/fonttools/pull/3126#discussion_r1205439785
+
+            row = tuple(row)
+
+            if use_NO_VARIATION_INDEX and not any(row):
+                front_mapping[(major << 16) + minor] = None
+                continue
+
+            encodings.add_row(row)
+            front_mapping[(major << 16) + minor] = row
+
+    # Prepare for the main algorithm.
+    todo = sorted(encodings.values(), key=_Encoding.gain_sort_key)
+    del encodings
+
+    # Repeatedly pick two best encodings to combine, and combine them.
+
+    heap = []
+    for i, encoding in enumerate(todo):
+        for j in range(i + 1, len(todo)):
+            other_encoding = todo[j]
+            combining_gain = encoding.gain_from_merging(other_encoding)
+            if combining_gain > 0:
+                heappush(heap, (-combining_gain, i, j))
+
+    while heap:
+        _, i, j = heappop(heap)
+        if todo[i] is None or todo[j] is None:
+            continue
+
+        encoding, other_encoding = todo[i], todo[j]
+        todo[i], todo[j] = None, None
+
+        # Combine the two encodings
+        combined_chars = other_encoding.chars | encoding.chars
+        combined_encoding = _Encoding(combined_chars)
+        combined_encoding.extend(encoding.items)
+        combined_encoding.extend(other_encoding.items)
+
+        for k, enc in enumerate(todo):
+            if enc is None:
+                continue
+
+            # In the unlikely event that the same encoding exists already,
+            # combine it.
+            if enc.chars == combined_chars:
+                combined_encoding.extend(enc.items)
+                todo[k] = None
+                continue
+
+            combining_gain = combined_encoding.gain_from_merging(enc)
+            if combining_gain > 0:
+                heappush(heap, (-combining_gain, k, len(todo)))
+
+        todo.append(combined_encoding)
+
+    encodings = [encoding for encoding in todo if encoding is not None]
+
+    # Assemble final store.
+    back_mapping = {}  # Mapping from full rows to new VarIdxes
+    encodings.sort(key=_Encoding.width_sort_key)
+    self.VarData = []
+    for encoding in encodings:
+        items = sorted(encoding.items)
+
+        while items:
+            major = len(self.VarData)
+            data = ot.VarData()
+            self.VarData.append(data)
+            data.VarRegionIndex = range(n)
+            data.VarRegionCount = len(data.VarRegionIndex)
+
+            # Each major can only encode up to 0xFFFF entries.
+            data.Item, items = items[:0xFFFF], items[0xFFFF:]
+
+            for minor, item in enumerate(data.Item):
+                back_mapping[item] = (major << 16) + minor
+
+    # Compile final mapping.
+    varidx_map = {NO_VARIATION_INDEX: NO_VARIATION_INDEX}
+    for k, v in front_mapping.items():
+        varidx_map[k] = back_mapping[v] if v is not None else NO_VARIATION_INDEX
+
+    # Recalculate things and go home.
+    self.VarRegionList.RegionCount = len(self.VarRegionList.Region)
+    self.VarDataCount = len(self.VarData)
+    for data in self.VarData:
+        data.ItemCount = len(data.Item)
+        data.optimize()
+
+    # Remove unused regions.
+    self.prune_regions()
+
+    return varidx_map
+
+
+ot.VarStore.optimize = VarStore_optimize
+
+
+def main(args=None):
+    """Optimize a font's GDEF variation store"""
+    from argparse import ArgumentParser
+    from fontTools import configLogger
+    from fontTools.ttLib import TTFont
+    from fontTools.ttLib.tables.otBase import OTTableWriter
+
+    parser = ArgumentParser(prog="varLib.varStore", description=main.__doc__)
+    parser.add_argument("--quantization", type=int, default=1)
+    parser.add_argument("fontfile")
+    parser.add_argument("outfile", nargs="?")
+    options = parser.parse_args(args)
+
+    # TODO: allow user to configure logging via command-line options
+    configLogger(level="INFO")
+
+    quantization = options.quantization
+    fontfile = options.fontfile
+    outfile = options.outfile
+
+    font = TTFont(fontfile)
+    gdef = font["GDEF"]
+    store = gdef.table.VarStore
+
+    writer = OTTableWriter()
+    store.compile(writer, font)
+    size = len(writer.getAllData())
+    print("Before: %7d bytes" % size)
+
+    varidx_map = store.optimize(quantization=quantization)
+
+    writer = OTTableWriter()
+    store.compile(writer, font)
+    size = len(writer.getAllData())
+    print("After:  %7d bytes" % size)
+
+    if outfile is not None:
+        gdef.table.remap_device_varidxes(varidx_map)
+        if "GPOS" in font:
+            font["GPOS"].table.remap_device_varidxes(varidx_map)
+
+        font.save(outfile)
+
+
+if __name__ == "__main__":
+    import sys
+
+    if len(sys.argv) > 1:
+        sys.exit(main())
+    import doctest
+
+    sys.exit(doctest.testmod().failed)